9 Best Guide Rails for Festool and Makita Track Saws (November 2026)
The best Festool and Makita track saw guide rails include the POWERTEC 71387 110" Track Saw Guide Rail for a 110 in joined setup, the Feiyagoo Track Rack for Guide Rail for mounted rail storage, and the SpeTool Track Saw Square 90° Right-Angle Track for square rail setup.
On this page (5 sections)
The best Festool track saw guide rail for most buyers is the POWERTEC 110 in joining set, which includes two 55 in rails and two connectors and is stated to work with Festool and Makita saws. For a factory-matched Festool option, choose a rail length that covers your cut without making setup or storage awkward.
Guide rails with similar names can have different profiles, connector fits and usable lengths. We compared the stated rail lengths, included connectors and named saw compatibility, so the picks here cover complete rail sets, individual Festool rails, and accessories that help with alignment or storage.
If you're comparing rails beyond these two saw systems, start with our best track saw guide rail options. This guide focuses on the Festool and Makita fit question.
Our picks at a glance
-
1
Best for a 110 in joined setupPOWERTEC 71387 110" Track Saw Guide Rail
9.7/10 our score
See it on Amazon -
2
-
3
Best for square rail setupSpeTool Track Saw Square 90° Right-Angle Track
9.2/10 our score
See it on Amazon
- 4
Check itFeikeer 110in Track Saw Guide Rail
Best for a long Festool-compatible set - 5
Best for a standard Festool lengthCheck it - 6
Check itFestool FS-800/2 32" Guide Rail
Best for shorter cuts - 7
Check itFestool 577039 Guide Rail Connector Set FSV/2
Best for joining Festool rails - 8
Check itFestool 491504 42" Guide Rail FS 1080/2
Best for a middle-length rail - 9
Check itFestool FS-1900/2 75" Guide Rail
Best for longer single-rail cuts
Which guide rail fits Festool and Makita track saws?
The POWERTEC 71387 is the clearest shared option in this group because it names both Makita plunge saws and Festool track saws as compatible. Festool rails provide a direct system choice for Festool users, while Feikeer names specific Festool saw models for its own 110 in set.
A rail's length is only one part of compatibility. Check the saw's manual and the rail maker's guidance for the profile, connector, splinter guard and accessories you plan to use.
We weighed stated compatibility, useful rail length, included connectors and how directly each item addresses the keyword. We did not treat every rail as interchangeable across brands, and a compatible saw fit does not guarantee every accessory will fit.
| Product | Best for | Joined length | Rails | Connectors | Our score |
|---|---|---|---|---|---|
| POWERTEC 71387 110" Track Saw Guide Rail | a 110 in joined setup | 110 in | Two 55 in rails | Two included | 9.7 |
| Feiyagoo Track Rack for Guide Rail | mounted rail storage | 9.4 | |||
| SpeTool Track Saw Square 90° Right-Angle Track | square rail setup | 9.2 | |||
| Feikeer 110in Track Saw Guide Rail | a long Festool-compatible set | 110 in | Two 55 in rails | 9.1 | |
| Festool 55" Guide Rail | a standard Festool length | 9.0 | |||
| Festool FS-800/2 32" Guide Rail | shorter cuts | 8.8 | |||
| Festool 577039 Guide Rail Connector Set FSV/2 | joining Festool rails | 8.5 | |||
| Festool 491504 42" Guide Rail FS 1080/2 | a middle-length rail | 8.2 | |||
| Festool FS-1900/2 75" Guide Rail | longer single-rail cuts | 8.0 |
The best Festool and Makita guide rails
These picks are ordered by how well their stated features match buyers seeking a Festool or Makita rail setup. The POWERTEC set leads for cross-brand compatibility, followed by storage and setup tools that make a rail system easier to use.
POWERTEC 71387 110" Track Saw Guide Rail: Best for a 110 in joined setup
- Two 55 in extruded aluminum rails
- Two rail connectors
- Compatible with Makita plunge saws and Festool track saws
This set combines two 55 in rails with two connectors, and POWERTEC says it works with Makita plunge saws and Festool track saws. It suits buyers who want a longer rail setup in one package.
Pros
- Two rails and connectors in one set
- Compatible with Makita and Festool saws
- Can be extended with compatible connectors
Cons
- Some brand-specific accessories may not fit
- Two joined rails take more setup than one short rail
The POWERTEC 71387 gives you two 55 in extruded aluminum rails and two connectors in one set. The two rails can be connected for a stated 110 in combined length, which is useful when a single shorter rail does not cover the cut.
POWERTEC names Makita plunge saws and Festool track saws as compatible. The set can also be extended with compatible POWERTEC, Makita or Festool connectors, though POWERTEC notes that not all brand-specific accessories work with its guides.
This is the most direct choice here if you want one rail setup for either of the named saw systems. Keep the two-rail joint aligned and supported during setup, and check accessory fit before adding clamps or guides from another brand.
Feiyagoo Track Rack for Guide Rail: Best for mounted rail storage
- Four rail holders
- Fits rail widths of 6.25–7.35 in
- For rails under 0.38 in thick on the thicker side
This four-holder rack stores rails on a wall, garage door, ceiling or van. Check your rail's width and thickness against the stated fit range before mounting it.
Pros
- Four holders included
- Supports vertical or horizontal storage
- Fits many major rail brands
Cons
- Requires a mounting surface
- Rail dimensions must match its fit range
The Feiyagoo Track Rack is a storage accessory, not a cutting rail. Its four holders are designed to mount rails vertically or horizontally on places such as a garage door, wall, ceiling or van.
Fit depends on rail dimensions: Feiyagoo gives a width range of 6.25–7.35 in, with thickness limits of under 0.38 in on the thicker side and under 0.22 in on the thinner side. Measure your rail before choosing this rack.
A long guide rail is easier to protect when it has a dedicated storage spot. If you carry rails between jobs, compare this rack with a best track saw track bag for a portable storage approach.
SpeTool Track Saw Square 90° Right-Angle Track: Best for square rail setup
- 90° reference edge
- Quick-lock clamp
- Compatible with Festool FS-Series, Makita and POWERTEC rails
The square uses a 90° reference edge and quick-lock mechanism to position a compatible rail. SpeTool says it works with Festool FS-Series and Makita rails; a spacer board is advised for thin panels.
Pros
- Quick-lock mechanism
- Non-marring clamp design
- Names Festool and Makita compatibility
Cons
- Thin panels may need a spacer board
- Designed for setup, not as a cutting rail
The SpeTool Track Saw Square helps set a compatible rail at 90° to a reference edge. Its quick-lock mechanism attaches to the rail, and its compatibility list names Festool FS-Series, Makita and POWERTEC rails.
This is useful when repeatable square positioning matters more than adding rail length. SpeTool says a spacer board should go under thin panels to help prevent the square from lifting the guide rail.
Use it as a setup aid alongside a suitable rail, not as a replacement for measuring the cut or checking the panel edge. Confirm the exact rail model is among the compatible systems before relying on the fit.
Feikeer 110in Track Saw Guide Rail: Best for a long Festool-compatible set
- Two 55 in rails
- Connector included
- Two 3 m splinter guards
This set pairs two 55 in rails with a connector and two splinter guards. Feikeer recommends using two rails of the same brand when joining for a longer cut.
Pros
- Two rails and connector included
- Names three Festool saw models
- Two splinter guards included
Cons
- Splinter guards need to be attached
- Feikeer advises against joining with an original Festool rail
The Feikeer 110 in set includes two 55 in rails, one connector and two 3 m splinter guards. Feikeer names the Festool TS-55, TS-75 and TS-60 as compatible saws.
Its guidance for joining rails matters: Feikeer recommends using two rails of the same brand for a longer cutting length and advises against connecting one of its rails to an original Festool rail. The connector position may need adjustment when joining to an original Festool track.
Choose this set if the named saw compatibility and included length suit your work, while keeping the rails paired together. The splinter guards need to be attached, so allow time to fit them before the first cut.
Festool 55" Guide Rail: Best for a standard Festool length
- 55 in FS 1400/2 rail
- Non-skid, self-clamping strips
- Connectible for customized lengths
This 55 in Festool rail is a familiar middle length for general panel work. Festool says it can connect with other guide rails for customized cutting lengths.
Pros
- Non-skid strips help hold the rail
- Integrated splinterguard
- Connectible with Festool connectors
Cons
- Shorter cutting reach than the 75 in rail
- A separate connector set is needed to join rails
The Festool 55 in FS 1400/2 is a useful middle-ground rail for cuts up to 49 in with a Festool TS plunge saw. Its bottom strips are self-clamping and non-skid, and its integrated splinterguard aligns with the cut line.
Festool says its rails connect with guide rail connectors to create customized lengths. This makes the 55 in rail a flexible starting point if you later need more reach, though the connector set is a separate purchase.
Pick this model when a 32 in rail is too short for your usual work and a 75 in rail would take more room than you need. For a broader rail comparison across saw brands, see our best guide rail for a track saw overview.
Festool FS-800/2 32" Guide Rail: Best for shorter cuts
- 32 in FS-800/2 rail
- Integrated splinterguard
- Connectible with other Festool rails
The 32 in FS-800/2 fits work where a longer rail would be awkward to position. Festool gives a cut length of up to 26 in with a TS plunge saw.
Pros
- Compact for short panels and parts
- Integrated splinterguard
- Can connect to other Festool rails
Cons
- Limited reach for sheet goods
- A long cut requires a second rail and connectors
The Festool FS-800/2 is a 32 in rail for smaller panels, parts and shorter guided cuts. Festool gives a maximum cut length of 26 in with a TS plunge saw.
The shorter span is easier to place on a compact workpiece than a long rail, but it will not cover a broad rip in one setup. Festool says this rail can connect with other guide rails, so you can add length with compatible connectors if needed.
Choose it when you want a compact rail for short cuts or a second rail for a connected setup. If you mostly break down full sheets, a 55 in or longer option is a better starting point.
Festool 577039 Guide Rail Connector Set FSV/2: Best for joining Festool rails
- Two connectors
- Self-aligning connection design
- For joining FS/2 rails
This connector set is for joining two Festool FS/2 rails for long workpieces. Its two pieces are designed to align the rails straight when installed in the correct order.
Pros
- Two connectors in the set
- Self-aligning design
- Made for long workpieces
Cons
- Connectors only, no rail included
- Intended for Festool FS/2 rails
The Festool 577039 connector set joins two FS/2 guide rails for long workpieces. It includes two connectors designed to align automatically, with laser markings to help place the pieces in the correct order.
This set makes sense if you already own compatible Festool rails and need more cutting reach. It does not include a rail, so confirm that your existing rails are FS/2 before selecting it.
For a longer single rail, compare the 75 in Festool option below with our guide to best long guide rails for track saws. A single rail avoids a joint, while connected rails can be easier to transport and store.
Festool 491504 42" Guide Rail FS 1080/2: Best for a middle-length rail
- 42 in FS 1080/2 rail
- Integrated splinterguard
- Connectible for custom lengths
The 42 in FS 1080/2 sits between the short 32 in rail and the 55 in option. Festool gives a cut length of up to 36 in with a TS plunge saw.
Pros
- Middle length for common panel cuts
- Integrated splinterguard
- Connectible with Festool connectors
Cons
- Less reach than the 55 in rail
- Separate connectors are needed to extend it
The Festool FS 1080/2 measures 42 in and has a stated cut length of up to 36 in with a TS plunge saw. That length sits between Festool's 32 in and 55 in options.
It includes an integrated splinterguard and can connect with other guide rails using Festool connectors. This can suit a shop where the short rail falls just short of common panel work, but the longer rail is less convenient to handle.
Choose it for a middle-length Festool rail and check the usable cut reach against your workpiece dimensions. If your saw is from another brand, verify profile and accessory fit before assuming the rail will work.
Festool FS-1900/2 75" Guide Rail: Best for longer single-rail cuts
- 75 in FS-1900/2 rail
- Integrated splinterguard
- Connectible with other Festool rails
The 75 in FS-1900/2 offers the longest single-rail reach in this group. Festool gives a cut length of up to 69 in with a TS plunge saw.
Pros
- Longest single rail in this roundup
- Integrated splinterguard
- Can connect with other Festool rails
Cons
- Long rail needs more room to store and handle
- Separate connectors are needed to extend it
The Festool FS-1900/2 is the longest single rail in this roundup at 75 in, with a stated cut length of up to 69 in when used with a TS plunge saw. It suits long cuts where setting up a rail joint is not preferred.
Festool says the rail has an integrated splinterguard and can connect with other guide rails. Its length also calls for more room when carrying and storing it, so measure your storage space and work area before choosing it.
Pick it for long cuts on large panels or workpieces. If a joined setup is more practical, compare it with a 110 in set and read our guide to best guide rails for Bosch track saws for a different saw system's compatibility choices.
How should you choose a guide rail length?
Choose a rail that covers your longest common cut, with enough extra length to position the saw safely at the start and finish. Festool's stated cut lengths are shorter than the rail lengths: its 32 in rail supports up to 26 in, the 42 in rail up to 36 in, the 55 in rail up to 49 in, and the 75 in rail up to 69 in with a TS plunge saw.
For work beyond one rail's reach, connecting compatible rails can extend the cut length. A connected setup needs a straight, secure joint, so use connectors intended for that rail system and check alignment before cutting.
If you're still comparing rail options by saw brand, our guide to the DeWalt track saw guide rail explains how length choice changes for that system. You can also compare a universal conversion kit if you are adapting a circular saw rather than choosing a dedicated track saw, using our best universal track saw kit guide.
What should you check before mixing rail brands?
Confirm both the saw and the accessories fit the rail profile before combining brands. POWERTEC names Makita and Festool saw compatibility but cautions that not all accessories made for a specific brand will work with its guides.
Connector fit deserves a separate check from saw fit. Feikeer specifically advises against joining its rails to an original Festool rail, while recommending same-brand rails for longer cuts.
For a square cut, the SpeTool square names Festool and Makita compatibility. For joining Festool FS/2 rails, the Festool 577039 set is the system-specific choice in this roundup.
Which rail should you choose?
Choose the POWERTEC 110 in set if you want a joined rail package that names both Makita and Festool compatibility. Choose a Festool 55 in or 75 in rail if you want a single rail for the cut length you make most often, and use the 32 in option for compact work.
If you already own Festool rails, the 577039 connectors can join compatible FS/2 rails. Check the rail profile and connector guidance before combining brands, then choose a storage option that protects the length you buy.
Our top 3 picks at a glance
-
1
Best for a 110 in joined setupPOWERTEC 71387 110" Track Saw Guide Rail
9.7/10 our score
See it on Amazon -
2
-
3
Best for square rail setupSpeTool Track Saw Square 90° Right-Angle Track
9.2/10 our score
See it on Amazon
Frequently asked questions
Can a Festool track saw use a Makita guide rail?
POWERTEC says its 110 in guide rail set is compatible with Festool track saws and Makita plunge saws. Rail profiles and accessory fit can vary, so check the saw and accessory fit before combining brands.
For long cuts, use the connector system intended for the rails you are joining.
Which Festool guide rail length should I choose?
Choose by the cut length you need and the space available to position the rail. Festool gives up to 26 in of cut with its 32 in rail, up to 49 in with the 55 in rail, and up to 69 in with the 75 in rail when paired with a TS plunge saw.
A longer rail can cover more in one setup, while a shorter rail is easier to place on small parts.
Can I connect a Makita rail to a Festool rail?
Some compatible rails can be connected, but connector fit and alignment depend on the rail profile and connector. POWERTEC says its rails can use Makita or Festool connectors, while Feikeer advises against joining its rails to an original Festool rail.
Check the guidance for the exact rail and connector pair before making a long cut.
How do you keep a guide rail square to a panel?
Use a square designed to lock onto your rail, then check its reference edge against the panel edge before cutting. The SpeTool square has a 90° reference and names Festool and Makita compatibility.
For thin panels, SpeTool advises placing a spacer board underneath to help keep the square from lifting the rail.
About this guide: Our look at Festool and Makita track saw guide rails draws on maker specs, materials and what owners report. See how we research.



