Best picks

9 Best Miter Gauges for Craftsman Table Saws (November 2026)

Updated on · By the Blade & Bench team

The best miter gauges for Craftsman table saws include the WEN Steel and Brass Premium Miter Gauge for standard Craftsman slots, the VEVOR Precision Miter Gauge for adjustable slot fit, and the GOINGMAKE Compact Table Saw Miter Gauge for portable Craftsman saws.

On this page (5 sections)
  1. Which miter gauge is best for a Craftsman table saw?
  2. Best miter gauges for Craftsman table saws
  3. How do you choose a miter gauge for a Craftsman table saw?
  4. Craftsman miter gauge safety and setup checks
  5. Final verdict on the best miter gauge for Craftsman table saws

The best miter gauge for a Craftsman table saw is the WEN Steel and Brass Premium Miter Gauge when your saw has a standard 3/4 in by 3/8 in slot. Check the slot shape, tabs and clearance first, then choose a compact gauge for portable work or a long fence for wide crosscuts.

A Craftsman table saw miter gauge has to do two jobs at once. It must slide without wobble, and it must hold the workpiece at the angle you set.

The most important check is the slot. Some picks here fit a standard 3/4 in by 3/8 in opening, while others specifically support T-shaped and U-shaped slots.

A Craftsman table saw miter gauge that is too narrow can shift during a cut, while one that is too large may not enter the slot at all.

If you want a broader overview, compare these picks with our guide to the best table saw miter gauge. Owners of other table saw brands can also use our guide to the best miter gauge for DeWalt table saw to see how the fit checks carry across brands.

Our picks at a glance

  1. 1 WEN Steel and Brass Premium Miter Gauge
    Best for standard Craftsman slots

    WEN Steel and Brass Premium Miter Gauge

    9.6/10 our score

    See it on Amazon
  2. 2 VEVOR Precision Miter Gauge
    Best for adjustable slot fit

    VEVOR Precision Miter Gauge

    9.5/10 our score

    See it on Amazon
  3. 3 GOINGMAKE Compact Table Saw Miter Gauge
    Best for portable Craftsman saws

    GOINGMAKE Compact Table Saw Miter Gauge

    9.5/10 our score

    See it on Amazon
  1. 4GOINGMAKE Table Saw Miter Gauge for Table

    GOINGMAKE Table Saw Miter Gauge for Table

    Best for fine fence adjustment
    Check it
  2. 5Kreg Precision Miter Gauge System

    Kreg Precision Miter Gauge System

    Best for repeatable workshop cuts
    Check it
  3. 6INCRA MITER1000SE Miter Gauge Special EditionCheck it
  4. 7GOINGMAKE Small Table Saw Miter Gauge

    GOINGMAKE Small Table Saw Miter Gauge

    Best for small work areas
    Check it
  5. 8GOINGMAKE Professional Table Saw Miter GaugeCheck it
  6. 9Kingson Precision Miter Gauge with a StandardCheck it

Which miter gauge is best for a Craftsman table saw?

The WEN Steel and Brass Premium Miter Gauge is the best overall choice for a Craftsman saw with a standard 3/4 in by 3/8 in slot. Its mix of 27 positive stops, steel and brass construction, and expansion discs gives you the widest range of repeatable angles without needing to read a scale for every common cut.

VEVOR sits close behind for a different reason. Its adjustable bead spring plunger and detachable disc are aimed squarely at getting a close fit in a T-shaped or U-shaped slot, and the 19 to 35 in retractable grating adds reach for wider stock.

The compact GOINGMAKE model makes more sense when your Craftsman saw is portable or your shop has limited table space. Its 360 mm fence is easier to carry and store, even though it gives up some length and stop count compared with the larger picks.

We compared slot fit, angle stops, fence size, adjustment features and the type of work each gauge supports. Our score weighs specs, features and buyer feedback against what you are shopping for.

The ranking is not a claim that one gauge suits every Craftsman model. Slot shape, tabs and clearance can change the right answer, so treat the order as a starting point and measure your own saw first.

If your work is mostly standard crosscuts and common miters, WEN is the safest first look. If fit adjustment is the problem you keep running into, VEVOR deserves a closer check.

If you move the saw between jobs or store tools in a tight space, the compact GOINGMAKE may fit your routine better. A shorter fence is a trade off, but it can be easier to control for small pieces.

For longer or more detailed work, the later picks in this roundup add telescoping fences, micro adjustment and more angle stops. Compare those features only after you know your slot will accept the bar.

That order keeps the decision practical. Start with fit, then match fence length and angle controls to the cuts you make most often.

ProductBest forSlot fitAngle stopsConstructionOur score
WEN Steel and Brass Premium Miter Gaugestandard Craftsman slots3/4 in by 3/8 in industry-standard slots27 positive stopsAlloy steel and brass9.6
VEVOR Precision Miter Gaugeadjustable slot fit3/4 in by 3/8 in T-shaped and U-shaped slots15 positive stop holesAluminum alloy head with steel miter bar9.5
GOINGMAKE Compact Table Saw Miter Gaugeportable Craftsman sawsAluminum alloy gauge and fence9.5
GOINGMAKE Table Saw Miter Gauge for Tablefine fence adjustment3/8 in by 3/4 in T and U slots13 stops from -67.5° to 67.5°9.4
Kreg Precision Miter Gauge Systemrepeatable workshop cuts9.0
INCRA MITER1000SE Miter Gauge Special Editionangle control41 laser-cut V-stops8.8
GOINGMAKE Small Table Saw Miter Gaugesmall work areas3/8 in by 3/4 in T and U slots11 positive stops8.7
GOINGMAKE Professional Table Saw Miter Gaugelong crosscutsAluminum alloy and metal8.2
Kingson Precision Miter Gauge with a Standardsimple 27-stop setup3/4 in by 3/8 in standard slots27 stops at 5° incrementsLightweight solid aluminum alloy7.9

Best miter gauges for Craftsman table saws

These gauges are listed from highest score to lowest. Start with the fit, then choose the fence length and angle controls that match your normal cuts.

WEN Steel and Brass Premium Miter Gauge: Best for standard Craftsman slots

1

WEN Steel and Brass Premium Miter Gauge: Best for standard Craftsman slots

WEN Steel and Brass Premium Miter Gauge, miter gauges for Craftsman table saws
9.6/10Our score
  • 27 positive angle stops
  • Steel and brass construction
  • 3/4 in by 3/8 in slot fit
  • Miter bar expansion discs

WEN is the strongest all-around choice when your Craftsman table saw uses the standard slot size. Its 27 stops, expansion discs and brass lock knobs support repeat angle work.

See it on Amazon

Pros

  • 27 positive stops
  • Expansion discs help reduce play
  • Works with T-shaped and U-shaped slots

Cons

  • Standard slot dimensions still need confirmation
  • More features than a simple compact setup

WEN is the strongest general-purpose pick when your Craftsman table saw has an industry-standard 3/4 in by 3/8 in miter slot. Its steel and brass construction is suited to regular shop use, and the 27 positive stops give you a wide set of repeatable angles.

The gauge has stops every 5° between 0° and 60°, plus a 22.5° stop. That covers common crosscuts and many frame, box and trim layouts without requiring you to read a scale for every setup.

Expansion discs help reduce side-to-side play in the bar. WEN also includes a T-track disc for T-shaped and U-shaped slots, but you should still compare the slot and tab layout on your Craftsman saw before ordering.

Laser-etched scale markings help with angles between the positive stops. The gauge also has brass lock knobs and a 2-year warranty.

Choose WEN when you want the broadest mix of standard-slot fit, angle stops and adjustment parts. It is less appealing if your saw uses an unusual slot or if you only need a small portable gauge.

WEN Steel and Brass Premium Miter GaugeCheck it on Amazon

VEVOR Precision Miter Gauge: Best for adjustable slot fit

2

VEVOR Precision Miter Gauge: Best for adjustable slot fit

VEVOR Precision Miter Gauge, miter gauges for Craftsman table saws
9.5/10Our score
  • 15 positive stop holes
  • 3/4 in by 3/8 in T and U slot fit
  • 19 to 35 in retractable grating
  • Adjustable spring-loaded plunger

VEVOR suits a Craftsman owner who wants a standard-slot gauge with adjustable fit and a long retractable grating. Measure the slot before ordering.

See it on Amazon

Pros

  • Adjustable bead spring plunger
  • Partially assembled
  • Laser-engraved angle scale

Cons

  • Fewer positive stops than WEN
  • 19 to 35 in grating may be more than a compact saw needs

VEVOR suits Craftsman owners who want an adjustable fit and a long grating in a standard-size gauge. It fits 3/4 in by 3/8 in T-shaped and U-shaped slots with a detachable disc, so slot shape matters as much as slot dimensions.

Its aluminum alloy head has 15 positive stop holes. The fixed positions include 90°, 15°, 22.5°, 30°, 35°, 45°, 60° and 67.5° on the stated angle layout, with proportional adjustment for other cuts.

The steel bar uses an adjustable bead spring plunger. If you feel gaps in the Craftsman slot, the included hex wrench lets you adjust the plunger for a closer fit.

The 19 to 35 in retractable grating gives this gauge more reach than a short compact fence. It arrives partially assembled, which can reduce setup work, but you still need to square the fence and check the first cut.

Choose VEVOR when fit adjustment is your main concern. Pick WEN instead if 27 positive stops matter more than the retractable grating.

VEVOR Precision Miter GaugeCheck it on Amazon

GOINGMAKE Compact Table Saw Miter Gauge: Best for portable Craftsman saws

3

GOINGMAKE Compact Table Saw Miter Gauge: Best for portable Craftsman saws

GOINGMAKE Compact Table Saw Miter Gauge, miter gauges for Craftsman table saws
9.5/10Our score
  • 360 mm fence
  • 11 positive angle stops
  • Flip stop
  • 3/4 in by 3/8 in T and U slot fit

This compact GOINGMAKE model fits portable work where a full-size fence would be awkward. Its 360 mm fence and flip stop help with repeat cuts in a smaller setup.

See it on Amazon

Pros

  • Compact 360 mm design
  • Flip stop for repeat cuts
  • Front, middle and end bar adjusters

Cons

  • Shorter fence than extended models
  • Slot size and shape still require measurement

This compact GOINGMAKE gauge is a good match for a portable Craftsman table saw or a small shop where storage matters. The 360 mm aluminum alloy fence has both millimeter and inch scales, and the compact body is easier to carry than the longer models here.

The gauge has 11 positive angle stops, including 90°, 60°, 45°, 30°, 22.5°, 15° and 0°, plus matching negative positions. The laser scale allows settings from -60° to 60° between the fixed stops.

A flip stop supports repeat cuts after you set its position. The design includes a magnifying glass and pointer, plus a locating pin for square and angle faces.

The 360 mm bar has adjusters at the front, middle and end. GOINGMAKE states that it fits 3/8 in by 3/4 in T slots and U slots, but check your Craftsman opening and tabs before purchase.

Choose this model when a full-size fence would crowd your table. It gives up fence length and stop count to stay compact.

GOINGMAKE Compact Table Saw Miter GaugeCheck it on Amazon

GOINGMAKE Table Saw Miter Gauge for Table: Best for fine fence adjustment

4

GOINGMAKE Table Saw Miter Gauge for Table: Best for fine fence adjustment

GOINGMAKE Table Saw Miter Gauge for Table, miter gauges for Craftsman table saws
9.4/10Our score
  • 18 in precision fence
  • Micro-adjustable flip stop
  • 13 positive angle stops
  • 0.001 in stated flip-stop accuracy

Choose this GOINGMAKE gauge when repeat length and small fence adjustments matter. The 18 in fence, magnifier and micro-adjustable flip stop make setup more precise.

See it on Amazon

Pros

  • Micro-adjustable flip stop
  • 13 positive stops
  • Four adjustable rings for slot fit

Cons

  • Longer than the compact model
  • The stated accuracy depends on careful setup

This GOINGMAKE gauge is aimed at repeat work where small length changes matter. Its 18 in extruded fence has millimeter and inch scales, while the micro-adjustable flip stop is designed for fine positioning.

The flip stop includes a magnifier and supports square and angle faces with a locating pin. GOINGMAKE states accuracy up to 0.001 in for the flip stop, so careful zeroing and a test cut remain part of the setup.

The protractor has 13 positive stops from -67.5° to 67.5°. A button and position holes help you move between common settings, including 90°, 67.5°, 60°, 45°, 30°, 22.5°, 15° and 0°.

Four adjustable rings help keep the bar aligned in a standard 3/8 in by 3/4 in T or U slot. A sliding pad on the back is intended to help the gauge move smoothly across the table surface.

Pick this model for fine repeat-cut adjustment and a medium-length fence. Choose the compact GOINGMAKE when your Craftsman saw needs a smaller setup.

GOINGMAKE Table Saw Miter Gauge for TableCheck it on Amazon

Kreg Precision Miter Gauge System: Best for repeatable workshop cuts

5

Kreg Precision Miter Gauge System: Best for repeatable workshop cuts

Kreg Precision Miter Gauge System, miter gauges for Craftsman table saws
9.0/10Our score
  • Adjustable fence
  • Factory-calibrated miter gauge
  • High-accuracy angle cutting
  • Heavy-duty construction

Kreg is a practical fit for a workshop that values a factory-calibrated gauge and adjustable fence. Confirm that its bar matches your Craftsman slot before buying.

See it on Amazon

Pros

  • Factory-calibrated design
  • Adjustable fence
  • Designed for repeatable cuts

Cons

  • The product data does not state the slot dimensions
  • Fewer setup details are available here

Kreg is suited to a workshop that wants an adjustable fence and a factory-calibrated miter gauge. The KMS7102 is designed for accurate, repeatable angle cuts on table saws, but the product data here does not state the Craftsman slot dimensions.

Its main advantage is a complete gauge system rather than a bare angle guide. The adjustable fence gives the workpiece a defined reference, and the design is intended to glide smoothly in a miter slot.

Kreg describes the construction as heavy duty for professional and DIY workshops. The included component is the miter gauge, so confirm the exact fence and bar arrangement you need before ordering.

This is a sensible choice when you value a known workshop brand and factory calibration. It is not the first pick if you need confirmed T-slot or U-slot compatibility from the available product information.

For a larger fence-focused comparison, see our guide to the best table saw miter gauge fence.

Kreg Precision Miter Gauge SystemCheck it on Amazon

INCRA MITER1000SE Miter Gauge Special Edition: Best for angle control

6

INCRA MITER1000SE Miter Gauge Special Edition: Best for angle control

INCRA MITER1000SE Miter Gauge Special Edition, miter gauges for Craftsman table saws
8.8/10Our score
  • 41 laser-cut V-stops
  • 18 to 31 in telescoping fence
  • Six GlideLOCK expansion points
  • Dual flip shop stop

INCRA suits detailed angle work and varied stock widths. Its 41 V-stops and telescoping fence offer more adjustment than a basic Craftsman replacement gauge.

See it on Amazon

Pros

  • 41 angle stops
  • Telescoping fence
  • Six expansion points

Cons

  • Heavier 8.3 lb design
  • Confirm Craftsman slot fit before ordering

INCRA is the specialist choice for detailed angle work. Its 41 laser-cut V-stops cover popular angles across the full 180° range, giving you more fixed positions than any other gauge in this roundup.

The GlideLOCK miter bar has 6 expansion points for repeat adjustments. That makes the bar especially relevant when you are trying to remove play from a Craftsman slot, although the slot still needs to accept the gauge.

Its telescoping fence adjusts from 18 to 31 in. That range supports both smaller pieces and wider stock without committing to a fixed long fence.

The dual flip shop stop helps with repeat positioning along the fence. The stainless steel construction adds a durable feel, but the 8.3 lb weight makes this a heavier choice for moving between work areas.

Choose INCRA when angle control and fence range matter more than low weight. Check your Craftsman slot and table clearance before committing to its larger design.

INCRA MITER1000SE Miter Gauge Special EditionCheck it on Amazon

GOINGMAKE Small Table Saw Miter Gauge: Best for small work areas

7

GOINGMAKE Small Table Saw Miter Gauge: Best for small work areas

GOINGMAKE Small Table Saw Miter Gauge, miter gauges for Craftsman table saws
8.7/10Our score
  • 12 to 21 in extendable fence
  • 11 positive angle stops
  • 12 in miter slide bar
  • Flip stop

This small GOINGMAKE model works well when your Craftsman saw sits in a tight shop or travels to jobs. Its 12 to 21 in fence gives more reach without a full-size frame.

See it on Amazon

Pros

  • Compact 2.66 lb design
  • Extendable fence
  • Clear mm and inch scales

Cons

  • 12 in miter bar needs careful slot alignment
  • Small size limits support for wide stock

This small GOINGMAKE gauge fits a compact shop, portable table or outdoor work area. Its fence extends from 12 to 21 in, giving you more support than a fixed short fence while keeping the gauge easy to store.

The gauge has 11 positive stops for common square and angle cuts. The positions include 90°, 60°, 45°, 30°, 22.5°, 15° and 0°, along with negative angles down to -60°.

A flip stop helps set repeat lengths from the laser-engraved millimeter and inch scales. The 12 in miter slide bar has adjustable rings to keep it aligned in the slot.

GOINGMAKE states compatibility with standard 3/8 in by 3/4 in T and U slots. If your Craftsman saw has a U-shaped slot, the round disc needs to be removed according to the product information.

Choose this model when the small size is a feature, not a compromise. A wider workpiece may need the longer fence of the professional GOINGMAKE or INCRA.

GOINGMAKE Small Table Saw Miter GaugeCheck it on Amazon

GOINGMAKE Professional Table Saw Miter Gauge: Best for long crosscuts

8

GOINGMAKE Professional Table Saw Miter Gauge: Best for long crosscuts

GOINGMAKE Professional Table Saw Miter Gauge, miter gauges for Craftsman table saws
8.2/10Our score
  • Fence extends to 36 in
  • Micro-adjustable flip stop
  • 11 positive angle stops
  • Zero calibration knob

Choose this heavy-duty GOINGMAKE gauge when long crosscuts need an extended fence. It is a large 10.98 lb option, so check table space and slot fit first.

See it on Amazon

Pros

  • Supports up to 36 in crosscutting
  • Fast zero calibration
  • Micro-adjustable flip stop

Cons

  • Largest and heaviest pick here
  • Sacrificial fence is not included

This heavy-duty GOINGMAKE gauge is the long-fence pick. Its standard fence length is 19.5 in and it extends to 36 in, giving wider workpieces more support during crosscuts.

The micro-adjustable flip stop has a magnifying glass and a stated accuracy up to 0.001 in. A zero calibration knob helps align the 0 scale after you set the fence close to the blade with a 1 to 3 mm gap.

There are 11 positive angle stops from -60° to 60°, plus a laser scale for other settings in that range. The bar includes adjusters at the front, middle and end for a closer fit in 3/8 in by 3/4 in T or U slots.

This gauge weighs 10.98 lb and uses aluminum alloy and metal construction. The size can help with long cuts, but measure your Craftsman table and storage area first.

Choose it when the 36 in fence solves a real support problem. The sacrificial fence is not included, so plan for that separately if your work requires one.

GOINGMAKE Professional Table Saw Miter GaugeCheck it on Amazon

Kingson Precision Miter Gauge with a Standard: Best for simple 27-stop setup

9

Kingson Precision Miter Gauge with a Standard: Best for simple 27-stop setup

Kingson Precision Miter Gauge with a Standard, miter gauges for Craftsman table saws
7.9/10Our score
  • 27 angle stops
  • 3/4 in by 3/8 in standard slot fit
  • Aluminum alloy construction
  • Adjustable expansion disc

Kingson is a straightforward choice for standard-size Craftsman saws and common angle work. Its 27 stops cover a broad 180° range without the larger fences found on other picks.

See it on Amazon

Pros

  • 27 locking stops
  • Lightweight aluminum alloy
  • Expansion disc reduces side play

Cons

  • Not compatible with small saws or 5/8 in miter grooves
  • No extended fence is described

Kingson is a straightforward option for a full-size Craftsman table saw with a standard 3/4 in by 3/8 in slot. Its lightweight solid aluminum alloy body keeps the setup simpler than models with long or telescoping fences.

The gauge has 27 locking stops at 5° increments across a 180° range. It also marks common positions such as 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° on both sides.

An adjustable expansion disc helps remove side play, and the indexing pin locks the selected angle after you rotate the protractor head. The gauge works with table saws, band saws, router tables and sanders with the stated standard slot.

Kingson is not compatible with small saws or 5/8 in miter grooves. That limitation makes measuring especially important for older or compact Craftsman models.

Choose it for common angle cuts and a lighter setup. Pick WEN if you want the same broad stop count plus stated T-slot and U-slot disc compatibility.

Kingson Precision Miter Gauge with a StandardCheck it on Amazon

How do you choose a miter gauge for a Craftsman table saw?

Choose a miter gauge for a Craftsman table saw by measuring the slot first, then matching the gauge to your fence, angle and portability needs. A close fit is more important than a long feature list.

What should you measure on a Craftsman table saw?

Measure the slot width and depth, then check whether its sides are straight, T-shaped or U-shaped. Look for tabs, rails or openings that could block a disc or prevent the bar from seating.

Several picks here use a 3/4 in by 3/8 in slot. VEVOR, WEN, GOINGMAKE and Kingson describe support for T-shaped or U-shaped arrangements, but those descriptions do not replace measuring your own saw.

Also check the table space around the slot. A 36 in fence can help with wide stock, but it may be awkward on a small benchtop saw.

How many angle stops do you need?

Most woodworking setups can start with common stops at 90°, 45°, 30°, 22.5° and 15°. More stops help when you repeat less common angles without reading a scale each time.

WEN and Kingson offer 27 stops. INCRA offers 41 V-stops, while the GOINGMAKE models here use 11 or 13 positive stops and add a scale for intermediate angles.

A high stop count does not remove the need to check the actual cut. Use a scrap piece to confirm the angle before cutting the final workpiece.

Is a long fence better for Craftsman table saw cuts?

A long fence is better when your workpiece needs more support, but it is not always better for a compact Craftsman saw. The GOINGMAKE professional model extends to 36 in, while the compact models use 360 mm or 12 to 21 in fences.

An extension fence can also improve repeat length setup. Compare our guide to the best table saw miter gauge with extension if fence reach is your main reason for upgrading.

Keep the fence clear of the blade path and leave enough room to guide the stock. A shorter fence may be easier to control for small pieces.

How do you reduce play in a miter slot?

Reduce play by adjusting the gauge's expansion discs, rings or spring-loaded plunger until the bar slides smoothly without side movement. Do not tighten the fit so much that the gauge binds.

WEN, Kingson and INCRA use expansion points or discs, while VEVOR uses an adjustable bead spring plunger. The GOINGMAKE gauges use adjustable rings on their bars.

Clean dust from the slot and bar before adjusting. After the gauge moves smoothly, check that the fence is square to the blade and make a test cut.

Craftsman miter gauge safety and setup checks

A miter gauge should move freely and hold the workpiece firmly before the saw is powered. Slide the bar through the slot with the saw unplugged and feel for binding, side play or a sudden catch.

Clean dust and chips from the slot before you fit the bar. A small buildup can make a good gauge feel loose or tight in the wrong places.

Unplug the saw while fitting the bar, adjusting the fence or checking the slot. Keep the power cord where it cannot be pulled into the work area while your hands are near the blade.

Check that the gauge face sits flat on the table and that the fence is square to the blade at 90 degrees. A quick test cut on scrap stock shows more than a visual check alone.

Use the gauge's stop or fence for repeat work, but keep your hands away from the blade path. Never reach over the blade to steady a small offcut.

Make sure the workpiece stays supported through the cut and follows your Craftsman saw manual for guard and operating instructions. A long or heavy piece may need a support stand so it cannot tip as the cut finishes.

Set the angle, lock it, and confirm the lock has not shifted before you start. If the gauge creeps when you tighten the handle, stop and reset it rather than forcing the cut.

For repeat lengths, set the flip stop or fence scale, then make a test piece and measure it. Small errors are much easier to correct on scrap than on finished stock.

Keep the slot and bar clean during use, since sawdust can change how smoothly the gauge slides. Wipe the bar after a session and store the gauge where the fence and scale will not get knocked out of alignment.

Check tabs, discs and expansion parts before each project, not only after a problem appears. A worn or bent part can affect both fit and angle accuracy.

If you are deciding between a table saw and a miter saw for a project, read how a miter saw differs from a table saw.

For more angle-cut terminology, see what a compound miter saw is.

Good setup habits take a few minutes and prevent most avoidable mistakes. Smooth movement, a firm lock and a checked test cut are the three things to confirm before cutting project stock.

Final verdict on the best miter gauge for Craftsman table saws

The WEN Steel and Brass Premium Miter Gauge is the best first choice for a Craftsman table saw with a standard 3/4 in by 3/8 in slot and a need for many repeatable angles. Its 27 positive stops, expansion discs and brass lock knobs cover common shop work without a long fence to manage.

Choose VEVOR if adjustable slot fit and a retractable grating matter more. The spring-loaded plunger is useful when a Craftsman slot has a little extra play, and the 19 to 35 in grating supports wider pieces.

Pick the compact GOINGMAKE model for a portable saw, the small GOINGMAKE for limited storage, or the professional GOINGMAKE when a fence up to 36 in supports your work. Each one trades reach for size in a different way.

Choose INCRA for the widest angle control, with 41 laser-cut V-stops and a telescoping fence. Choose Kreg for a factory-calibrated workshop system, or Kingson for a simpler 27-stop gauge with a lighter aluminum alloy body.

The right pick depends on the work you do most. A compact fence is easier to use on small parts, while a longer fence helps with wide stock but needs clear table space.

Measure the slot, check the tabs and confirm the fence clearance before you order. Those checks matter more than choosing the gauge with the most features.

Once the gauge arrives, adjust it for smooth movement without side play. Square the fence to the blade and verify the angle with a scrap test cut before cutting final stock.

Our top 3 picks at a glance

  1. 1 WEN Steel and Brass Premium Miter Gauge
    Best for standard Craftsman slots

    WEN Steel and Brass Premium Miter Gauge

    9.6/10 our score

    See it on Amazon
  2. 2 VEVOR Precision Miter Gauge
    Best for adjustable slot fit

    VEVOR Precision Miter Gauge

    9.5/10 our score

    See it on Amazon
  3. 3 GOINGMAKE Compact Table Saw Miter Gauge
    Best for portable Craftsman saws

    GOINGMAKE Compact Table Saw Miter Gauge

    9.5/10 our score

    See it on Amazon

Frequently asked questions

Will a Craftsman miter gauge fit any table saw?

No. Measure the Craftsman miter slot's width, depth and shape before choosing a replacement.

Several picks here fit a standard 3/4 in by 3/8 in slot, but a matching size does not remove the need to check tabs, rails and the slot opening.

What size miter slot does a Craftsman table saw use?

The exact size depends on the Craftsman table saw model. Many gauges here are designed for a 3/4 in by 3/8 in standard slot, while some include T-shaped and U-shaped slot compatibility.

Measure your own saw instead of relying only on the brand name.

Are miter gauges universal?

Miter gauges are only universal within the slot dimensions and shapes they support. A gauge that fits a 3/4 in by 3/8 in slot may still need adjustment for side play, and tabs or a T-slot disc can affect the final fit.

How do you set up a miter gauge on a table saw?

Slide the bar into the slot with the saw unplugged, then check that the gauge moves smoothly without side play. Adjust the bar's expansion rings, discs or plunger when available, square the fence to the blade, and verify the angle with a test piece before cutting project stock.