Best picks

9 Best Table Saw Miter Gauges (November 2026)

Updated on · By the Blade & Bench team

The best table saw miter gauges include the POWERTEC 71391 Table Saw Precision Miter Gauge for a complete fence setup, the WEN Steel and Brass Premium Miter Gauge for a gauge-only setup, and the O'SKOOL Miter Gauge for Table Saw for wide workpieces.

On this page (12 sections)
  1. Which table saw miter gauge fits each kind of work?
  2. 1. POWERTEC 71391 Table Saw Precision Miter Gauge: Best for a complete fence setup
  3. 2. WEN Steel and Brass Premium Miter Gauge: Best for a gauge-only setup
  4. 3. O'SKOOL Miter Gauge for Table Saw: Best for wide workpieces
  5. 4. VEVOR Precision Miter Gauge: Best for adjustable fence reach
  6. 5. GOINGMAKE Compact Table Saw Miter Gauge: Best for portable saws
  7. 6. GOINGMAKE Table Saw Miter Gauge for Table: Best for micro-adjusting a flip stop
  8. 7. VEVOR Precision Miter Gauge: Best for an 18-inch fence
  9. 8. Kreg Precision Miter Gauge System: Best for a familiar system brand
  10. 9. Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge: Best for fine angle indexing
  11. How should you choose a table saw miter gauge?
  12. Which table saw miter gauge should you pick?

The POWERTEC 71391 is the best table saw miter gauge for most woodworkers because it combines 27 angle stops with a fence and flip stop. A miter gauge with a better slot fit can also reduce side play, which helps keep a board registered as you guide it through a crosscut.

For other guided setups, see our table saw jigs.

Match the gauge to your saw's slot dimensions and the work you repeat most. If you're choosing a gauge for a specific saw, see our guides to the best miter gauge for DeWalt table saws and best miter gauge for Craftsman table saws.

Our picks at a glance

  1. 1 POWERTEC 71391 Table Saw Precision Miter Gauge
    Best for a complete fence setup

    POWERTEC 71391 Table Saw Precision Miter Gauge

    9.7/10 our score

    See it on Amazon
  2. 2 WEN Steel and Brass Premium Miter Gauge
    Best for a gauge-only setup

    WEN Steel and Brass Premium Miter Gauge

    9.6/10 our score

    See it on Amazon
  3. 3 O'SKOOL Miter Gauge for Table Saw
    Best for wide workpieces

    O'SKOOL Miter Gauge for Table Saw

    9.6/10 our score

    See it on Amazon
  1. 4VEVOR Precision Miter Gauge

    VEVOR Precision Miter Gauge

    Best for adjustable fence reach
    Check it
  2. 5GOINGMAKE Compact Table Saw Miter GaugeCheck it
  3. 6GOINGMAKE Table Saw Miter Gauge for Table

    GOINGMAKE Table Saw Miter Gauge for Table

    Best for micro-adjusting a flip stop
    Check it
  4. 7VEVOR Precision Miter Gauge

    VEVOR Precision Miter Gauge

    Best for an 18-inch fence
    Check it
  5. 8Kreg Precision Miter Gauge System

    Kreg Precision Miter Gauge System

    Best for a familiar system brand
    Check it
  6. 9Incra MITER1000/18T Miter 1000 Table Saw Miter-gaugeCheck it

Which table saw miter gauge fits each kind of work?

The POWERTEC suits a complete setup, while the other picks focus on slot fit, longer fence support, compact size or repeat cuts. We compared their stated features and how directly they match common table saw miter gauge needs.

ProductBest forAngle stopsFenceSlot fitOur score
POWERTEC 71391 Table Saw Precision Miter Gaugea complete fence setup27, with 1-degree spacing24 x 3 in multi-trackStandard 3/4 x 3/8 in slots, with or without T-slots9.7
WEN Steel and Brass Premium Miter Gaugea gauge-only setup27 positive stopsStandard 3/4 x 3/8 in slots9.6
O'SKOOL Miter Gauge for Table Sawwide workpieces0° to 60° in 5° steps, plus 22.5°Extends from 22 to 36 inCompatible 3/4 x 3/8 in miter slots9.6
VEVOR Precision Miter Gaugeadjustable fence reach15 positions from 90° to 67.5° left and rightStandard 3/4 x 3/8 in slots9.5
GOINGMAKE Compact Table Saw Miter Gaugeportable saws11 positive stops360 mm, about 14 in3/4 x 3/8 in T-shaped and U-shaped slots9.5
GOINGMAKE Table Saw Miter Gauge for Tablemicro-adjusting a flip stop13 positions from 90° to 67.5° left and right18 inStandard 3/4 x 3/8 in T-shaped and U-shaped slots9.4
VEVOR Precision Miter Gaugean 18-inch fence15 positive positions18 inStandard 3/4 x 3/8 in slots9.2
Kreg Precision Miter Gauge Systema familiar system brand9.0
Incra MITER1000/18T Miter 1000 Table Saw Miter-gaugefine angle indexing41 indexed positions in 5-degree increments18 in track fenceStandard or near-standard 3/4 x 3/8 in channels8.5

How we chose the best table saw miter gauge options

We weighed angle stops, slot compatibility, fence support and features for repeat cuts. A high stop count can make common settings faster, but a gauge only fits well if its bar matches the saw's slot.

The supplied scores reflect how closely each set of features matches the searcher's likely needs. Our score weighs specs, features and buyer feedback against what you're shopping for.

Before buying, measure the slot width and depth, and check for a T-slot. The POWERTEC, WEN, O'SKOOL, GOINGMAKE and VEVOR options list a standard 3/4 x 3/8 in fit, while POWERTEC also notes that it won't work with 5/8 in slots.

A gauge's fence changes how much of a board it can support. See our guide to a table saw miter gauge fence if fence length and mounting options are the main decision.

1. POWERTEC 71391 Table Saw Precision Miter Gauge: Best for a complete fence setup

1

POWERTEC 71391 Table Saw Precision Miter Gauge: Best for a complete fence setup

POWERTEC 71391 Table Saw Precision Miter Gauge, table saw miter gauges
9.7/10Our score
  • 27 angle stops
  • 24 in multi-track fence
  • T-track flip stop
  • Fits standard 3/4 x 3/8 in miter slots

A three-piece setup combines the gauge, multi-track fence and flip stop. The 27 angle stops and 24 in scale cover frequent angle changes and repeat lengths.

See it on Amazon

Pros

  • 27 indexed angle stops
  • Includes fence and flip stop
  • Removable T-slot plate

Cons

  • Not for smaller saws or 5/8 in miter slots

POWERTEC combines a gauge, a 24 in multi-track fence and a T-track flip stop. That makes this a useful pick when you want to set an angle and repeat a cut length without adding separate fence parts.

Its 27 indexing stops use 1-degree spacing, with positive stops at common angles including 0°, 10°, 22.5°, 30° and 45°. The gauge works in standard 3/4 x 3/8 in miter slots with or without T-slots, but POWERTEC says it won't work with smaller saws or 5/8 in slots.

The fence has a laser-engraved measuring scale and accepts several T-track fasteners and accessories. The flip stop locks without tools and can be moved to the left or right side of the blade.

Choose it if the included fence and stop match the work you do often. If you need a separate support extension, compare it with a table saw miter gauge with extension.

POWERTEC 71391 Table Saw Precision Miter GaugeCheck it on Amazon

2. WEN Steel and Brass Premium Miter Gauge: Best for a gauge-only setup

2

WEN Steel and Brass Premium Miter Gauge: Best for a gauge-only setup

WEN Steel and Brass Premium Miter Gauge, table saw miter gauges
9.6/10Our score
  • 27 positive stops
  • Steel and brass construction
  • Expansion discs
  • Fits standard 3/4 x 3/8 in miter slots

This gauge focuses on angle adjustment and slot fit without an included fence. Expansion discs help reduce side play, and laser-etched scale markings aid setup.

See it on Amazon

Pros

  • 27 positive stops
  • Expansion discs to help reduce play
  • Fits several woodworking tools with standard slots

Cons

  • No fence or flip stop included

WEN is a straightforward choice if you want a 27-stop gauge and already have a fence or prefer to add one separately. It uses steel and brass construction, with expansion discs that help reduce side-to-side play in a compatible slot.

The gauge fits industry-standard 3/4 x 3/8 in miter slots and is also made for router tables, band saws and other woodworking tools with that slot size. Laser-etched scale markings and brass lock knobs support setting and securing an angle.

WEN's positive stops cover settings from 0° to 60° in 5-degree steps, plus 22.5°. If you frequently cut between those preset angles, its scale reaches the edge of the steel miter plate for setting other positions.

Choose WEN when the gauge itself matters more than an included fence. For more options matched to a particular saw, see our DeWalt miter gauge guide.

WEN Steel and Brass Premium Miter GaugeCheck it on Amazon

3. O'SKOOL Miter Gauge for Table Saw: Best for wide workpieces

3

O'SKOOL Miter Gauge for Table Saw: Best for wide workpieces

O'SKOOL Miter Gauge for Table Saw, table saw miter gauges
9.6/10Our score
  • 27 positive angle stops
  • 22–36 in extension fence
  • Adjustable flip stop
  • Reversible fence setup

The extension fence supports wider boards, and the flip stop helps set repeated lengths. Its faceplate uses user-supplied 3/4 in plywood.

See it on Amazon

Pros

  • Adjustable fence length
  • Fence can be set on either side of the blade
  • Expansion washers adjust slot fit

Cons

  • Faceplate material is not included
  • Scale tape needs installation and calibration

O'SKOOL stands out for its 22–36 in extension fence, which can support more of a wider board during a crosscut. Its front T-track accepts a 3/4 in plywood faceplate, but you supply that faceplate material.

The gauge has 27 positive stops from 0° to 60° in 5-degree steps, plus 22.5°. It also supports non-preset angle settings, and its fence and flip stop can be configured for either side of the blade.

Four expansion washers adjust the fit in a compatible 3/4 x 3/8 in slot. O'SKOOL advises squaring and calibrating the gauge before first use, and the scale tape also needs installation and calibration before you rely on its readings.

Pick this model when fence reach matters and you're comfortable making a faceplate. If the angle is set on a miter saw instead, our guides to the best miter saw stops and compound miter saws explain related setups.

O'SKOOL Miter Gauge for Table SawCheck it on Amazon

4. VEVOR Precision Miter Gauge: Best for adjustable fence reach

4

VEVOR Precision Miter Gauge: Best for adjustable fence reach

VEVOR Precision Miter Gauge, table saw miter gauges
9.5/10Our score
  • 15 positive stop holes
  • 19–35 in retractable grating
  • Adjustable spring-loaded plunger
  • Removable disc for T-shaped and U-shaped slots

A long retractable grating supports a broader workpiece range, while the adjustable plunger can reduce gaps in the miter slot. Check the slot size before buying.

See it on Amazon

Pros

  • Retractable grating adjusts from 19 to 35 in
  • Removable disc supports T-shaped and U-shaped slots
  • Partially assembled

Cons

  • 15 stop positions instead of 27

This VEVOR gauge has a 19–35 in retractable grating and 15 positive stop holes. The range gives you more fence reach to work with than a fixed, short gauge, while the adjustable plunger helps tune the bar if you notice gaps in a compatible slot.

Its 15 stops include 90° and seven angles on each side: 15°, 22.5°, 30°, 35°, 45°, 60° and 67.5°. The removable disc supports both T-shaped and U-shaped standard 3/4 x 3/8 in slots.

The gauge arrives partially assembled, and the angle scale is laser engraved. Measure the saw's slot first, since the stated fit covers a specific standard size.

Choose this version when fence reach and adjustable slot fit are priorities. If your cuts need a larger supported panel or more control than a gauge fence provides, consider a table saw sled.

VEVOR Precision Miter GaugeCheck it on Amazon

5. GOINGMAKE Compact Table Saw Miter Gauge: Best for portable saws

5

GOINGMAKE Compact Table Saw Miter Gauge: Best for portable saws

GOINGMAKE Compact Table Saw Miter Gauge, table saw miter gauges
9.5/10Our score
  • Compact 360 mm fence
  • 11 positive angle stops
  • Flip stop
  • Adjustable miter bar

The compact fence and 360 mm miter bar suit portable jobsite saws. A flip stop supports repeated cuts, and the gauge has positive stops for common angles.

See it on Amazon

Pros

  • Compact size for carrying and storage
  • Fence has millimeter and inch scales
  • Flip stop supports repeat cuts

Cons

  • Shorter fence than full-size systems

This GOINGMAKE gauge uses a 360 mm fence, about 14 in long, with a matching 360 mm miter bar. Its compact size suits portable jobsite saws where a longer fence can be awkward to store or carry.

It has 11 positive angle stops, including settings such as 90°, 45°, 22.5° and 0°, plus several negative angles. A laser scale supports other settings from -60° to 60°, and the flip stop is designed for repeated length cuts.

The adjustable bar fits 3/4 x 3/8 in T-shaped and U-shaped slots. The fence has millimeter and inch scales, so check which units suit your usual layout marks.

Pick the compact GOINGMAKE when portability matters more than fence length. For a saw-specific fit check, compare our Craftsman table saw miter gauge guide.

GOINGMAKE Compact Table Saw Miter GaugeCheck it on Amazon

6. GOINGMAKE Table Saw Miter Gauge for Table: Best for micro-adjusting a flip stop

6

GOINGMAKE Table Saw Miter Gauge for Table: Best for micro-adjusting a flip stop

GOINGMAKE Table Saw Miter Gauge for Table, table saw miter gauges
9.4/10Our score
  • 18 in extruded fence
  • Micro-adjustable flip stop
  • 13 positive angle stops
  • Adjustable rings for standard slots

The 18 in fence includes a micro-adjustable flip stop and magnifier for scale reading. Its button and position holes provide 13 positive angle settings.

See it on Amazon

Pros

  • Micro-adjustable flip stop
  • Magnifier helps align with the scale
  • Adjustable rings fit standard slots

Cons

  • Requires zero calibration before using the fence scale

GOINGMAKE's longer model pairs an 18 in fence with a micro-adjustable flip stop and a magnifier for reading its scales. The maker describes the flip stop's accuracy as up to 0.001 in, so treat that as a stated claim rather than a guaranteed result for every setup.

The gauge provides 13 positive angle positions, including 90°, 67.5°, 45°, 30°, 22.5°, 15° and 0°, along with matching negative-angle settings. Its button and position holes help you select a preset before locking the angle.

Four adjustable rings help fit standard 3/4 x 3/8 in T-shaped or U-shaped slots. Calibrate the fence to zero before using its scale to set cut lengths.

This is a good match if repeat lengths and fine flip-stop adjustments matter more than a longer fence. For angle setup basics, follow our guide on how to cut angles on a table saw.

GOINGMAKE Table Saw Miter Gauge for TableCheck it on Amazon

7. VEVOR Precision Miter Gauge: Best for an 18-inch fence

7

VEVOR Precision Miter Gauge: Best for an 18-inch fence

VEVOR Precision Miter Gauge, table saw miter gauges
9.2/10Our score
  • 18 in fence
  • 15 positive stop holes
  • Adjustable spring-loaded plunger
  • Removable disc

This VEVOR version pairs an 18 in fence with 15 positive angle positions. The adjustable plunger helps tune the bar fit when a compatible slot has side gaps.

See it on Amazon

Pros

  • Includes an 18 in fence
  • Removable disc supports T-shaped and U-shaped slots
  • Partially assembled

Cons

  • Fewer stop positions than 27-stop gauges

This VEVOR model includes an 18 in fence and 15 positive stop holes. Its detachable disc fits standard 3/4 x 3/8 in T-shaped and U-shaped slots, while a spring-loaded plunger can be adjusted if the gauge has side gaps.

The stops cover common positions such as 15°, 22.5°, 30°, 35°, 45°, 60° and 67.5° on each side of 90°. The gauge arrives partially assembled, so only a few core parts need attaching.

This model's stated features resemble the longer-reach VEVOR above, but it pairs its gauge with a fixed 18 in fence. Choose it when that fence length fits your stock and bench space.

For repeatable cut lengths along a rip fence, a table saw fence stop is another accessory to compare. Use a miter gauge for supported crosscuts and angled work.

VEVOR Precision Miter GaugeCheck it on Amazon

8. Kreg Precision Miter Gauge System: Best for a familiar system brand

8

Kreg Precision Miter Gauge System: Best for a familiar system brand

Kreg Precision Miter Gauge System, table saw miter gauges
9.0/10Our score
  • Adjustable fence
  • Designed for repeatable angle cuts
  • Smooth miter-slot travel
  • Heavy-duty construction

Kreg describes this as a complete miter gauge system with an adjustable fence. The available product details do not specify stop positions or slot dimensions, so confirm fit and angle needs before choosing it.

See it on Amazon

Pros

  • Adjustable fence included
  • Designed for controlled, repeatable operation
  • Heavy-duty construction

Cons

  • Angle stop count and slot dimensions are not specified

Kreg describes this as a complete miter gauge system with an adjustable fence for repeatable angle cuts. Its stated features include smooth movement in miter slots and heavy-duty construction for regular shop use.

The available specifications don't identify its angle stop count or the slot dimensions it fits. Confirm those details for your saw before buying, especially if it has a nonstandard slot.

Choose Kreg if you prefer its system approach and can verify the fit and angle controls for your needs. If you want a sled that captures a workpiece on both sides of the blade, compare crosscut sleds for table saws.

Kreg Precision Miter Gauge SystemCheck it on Amazon

9. Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge: Best for fine angle indexing

9

Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge: Best for fine angle indexing

Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge, table saw miter gauges
8.5/10Our score
  • 41 indexed angle stops
  • 18 in track fence
  • Six expansion points
  • Fits standard or near-standard 3/4 x 3/8 in channels

The Incra system offers 41 indexed positions across a plus-or-minus 90° range and six adjustment points for the bar. Its 18 in fence includes a sliding stop positioner.

See it on Amazon

Pros

  • 41 indexed angle positions
  • Six expansion points adjust bar fit
  • Includes track fence and stop positioner

Cons

  • 5-degree indexing may be less convenient for angles between stops

The Incra Miter 1000 has 41 indexed angle stops in 5-degree increments across a plus-or-minus 90° range. Its solid-steel head and 18 in track fence pair with a sliding stop positioner for controlled, repeatable settings.

Six expansion points adjust both sides of the bar to help reduce side play. Incra says it fits standard or near-standard 3/4 x 3/8 in channels, including Delta, Craftsman and import saws, so measure your slot if the fit is uncertain.

A 5-degree index can be useful for preset angles, though it may take more adjustment for angles between stops. The fence and stop positioner give you added length control for repeated parts.

Choose Incra if indexed angles and adjustable bar fit are your main priorities. Our guide on how to square a crosscut sled covers another route to consistent crosscuts.

Incra MITER1000/18T Miter 1000 Table Saw Miter-gaugeCheck it on Amazon

How should you choose a table saw miter gauge?

Choose a gauge by matching its bar to your saw slot, then compare the angle positions, fence length and repeat-cut features. These checks help avoid paying for a setup that doesn't suit your stock or workflow.

Which miter slot size should you check first?

Measure slot width and depth before comparing models. Several picks here are made for a standard 3/4 x 3/8 in slot, while POWERTEC specifically excludes 5/8 in slots.

Also check whether your slot has a T-shape. Some gauges include a removable plate or disc for different slot shapes, and a gauge may need adjustment to remove side play.

How many angle stops do you need?

A higher stop count offers more indexed choices, but the spacing matters. POWERTEC has 27 stops at 1-degree spacing, WEN and O'SKOOL have 27 stops at 5-degree spacing, and Incra has 41 indexed positions at 5-degree increments.

For occasional square and common angled cuts, common stops may cover your needs. If your work calls for a non-preset angle, check whether the gauge lets you set that position and how clearly its scale can be read.

When does a longer fence help?

A longer fence can support more of a board and give you more room to set a stop. The O'SKOOL extension adjusts from 22 to 36 in, while the VEVOR grating extends from 19 to 35 in.

Longer isn't always easier to store or handle on a compact saw. Compare the fence's reach with your typical board width and available table space.

Are flip stops useful for repeat cuts?

A flip stop helps you set a length once and repeat it across several pieces. Check that the stop can lock securely on the fence and that the scale can be calibrated to your blade position.

For a table saw, a miter gauge stop controls crosscut length. A miter saw stop serves a different setup, so compare it with the best miter saw stops if you use both saw types.

Which table saw miter gauge should you pick?

Choose the POWERTEC 71391 for an all-in-one gauge, fence and flip stop. Pick WEN if you need the gauge itself, O'SKOOL or VEVOR for added fence reach, or the compact GOINGMAKE for a portable saw.

A miter gauge guides crosscuts and angled cuts across the table. For the saw-type distinction and when each tool suits the cut, read how a miter saw differs from a table saw.

Our top 3 picks at a glance

  1. 1 POWERTEC 71391 Table Saw Precision Miter Gauge
    Best for a complete fence setup

    POWERTEC 71391 Table Saw Precision Miter Gauge

    9.7/10 our score

    See it on Amazon
  2. 2 WEN Steel and Brass Premium Miter Gauge
    Best for a gauge-only setup

    WEN Steel and Brass Premium Miter Gauge

    9.6/10 our score

    See it on Amazon
  3. 3 O'SKOOL Miter Gauge for Table Saw
    Best for wide workpieces

    O'SKOOL Miter Gauge for Table Saw

    9.6/10 our score

    See it on Amazon