9 Best Table Saw Push Blocks (November 2026)
The best table saw push blocks include the Zebekk Push Block for Table Saws for narrow rip control, the MICROJIG GRR-RIPPER 2GO Push Block for Routers for thin cuts, and the POWERTEC Table Saw Push Block 2PK for two-handed feeding.
On this page (6 sections)
The best table saw push block for most narrow-rip work is the Zebekk Push Block for Table Saws, because its high-friction base, adjustable balance support and multidirectional control keep your hands away from the blade while guiding stock.
That matters most on small or narrow pieces, where fingers get close to the blade and a small shift can spoil the cut. A push block lets you apply pressure from above and behind the work, so stock stays against the fence and feeds in a steady line.
A good block should give a stable grip, a clear hand position and enough control for the cut ahead. Grip matters because a slipping block can let the workpiece move, and hand position matters because fingers should stay well clear of the blade path.
Some picks focus on thin rips, some offer a pair of blocks, and others combine blocks with push sticks. The right choice depends on the stock you cut most often, the machines in your shop and whether you want one tool or a set covering several hand positions.
Use a push block as part of a complete setup. Read our guide on how to use a table saw safely before making a cut, and check that the guard, riving knife or splitter and fence are correctly positioned.
No push block can replace those parts, and none should be used to force stock that is binding. The block guides the work while the guard, splitter and fence control the cut itself.
Our picks at a glance
- 4
Check itPOWERTEC Push Block & Push Stick Fits
Best complete safety set - 5
Check itPeachtree Woodworking Supply Fulton 1201 5 Piece Safety
Best for varied shop machines - 6
Check itBOW Products Expandable Push Block
Best for adjustable width - 7
Check itPEMEDOR Push Block for Table Saw Safety
Best for sliding adjustments - 8
Best for adjustable balance supportCheck it - 9
Check itFulton Woodworking Tools Gator Grip Jointer Push Blocks
Best for rubber-pad grip
The best table saw push blocks for different cuts
The Zebekk is the best table saw push block for most shoppers, while MICROJIG is the sharper choice for thin cuts and BOW Products is better when width changes are part of the work. The kits make more sense when you need several hand positions or tools.
Zebekk Push Block for Table Saws: Best for narrow rip control
- High-friction rubber base
- Adjustable balance support
- Top sliding adjustment
- Works with table saws, router tables, band saws and jointers
The Zebekk combines a rubber base, adjustable balance support and multidirectional force control for narrow or small workpieces. It suits shoppers who want one push block for several shop machines.
Pros
- Adjustable support
- 1/4 in cutting accuracy claim
- Alcohol-cleanable friction surface
Cons
- Single push block
- Requires adjustment for different workpieces
The Zebekk Push Block for Table Saws is the strongest all-around choice here. Its high-friction rubber base holds the wood while the ergonomic plastic handle lets you apply downward and forward pressure.
Downward pressure keeps stock flat on the table, while forward pressure feeds it through the cut. Multidirectional control helps you manage both at once on narrow work.
The top sliding adjustment helps control crop width, with cutting accuracy stated down to 1/4 in. The balance support can move up or down and can be installed on either side of the main body.
That flexibility helps when you switch from a thin strip to a different wood thickness. You can match the support to the piece instead of relying on one fixed shape.
The block works with table saws, router tables, band saws and jointers, so it can stay useful beyond one machine. It measures 7.01 x 5.61 x 4.49 in and weighs 1.8 lb.
The friction surface can be cleaned with alcohol when it gets dirty. It is a single block, so buyers who want matched pressure from both hands may prefer a 2-pack.
MICROJIG GRR-RIPPER 2GO Push Block for Routers: Best for thin cuts
- 5/16 in minimum cutting width
- Green GRIP non-slip surface
- Precision leg and tunnel system
- Fully assembled
The GRR-RIPPER 2GO is the focused choice for thin cuts, with a stated minimum cutting width of 5/16 in. Its clearance step, dovetail grooves and two-block option add flexibility for longer work.
Pros
- Thin-cut focus
- Fully assembled
- Can use 2 together for longer cuts
Cons
- Single block
- More specialized design
The MICROJIG GRR-RIPPER 2GO is the best table saw push block here for thin cuts, with a stated minimum cutting width of 5/16 in. Its Green GRIP surface and precision leg and tunnel system are designed to control both sides of the cut.
That two-sided control is what sets this design apart from a simple pad. By feeding and guiding both the keeper and the waste side, it aims to keep the stock tight against the fence and reduce the chance of movement during the cut.
The clearance step helps the block move over router bits, while the dovetail grooves allow custom accessories. It works with routers, jointers, band saws and table saws, so the same block can follow you across several machines.
The block arrives fully assembled and includes a Color Code Index sticker. That sticker helps you align the block with the rip fence scale so it stays clear of the blade, and it makes setup quicker than a block that needs assembly first.
For longer cuts, MICROJIG says you can use 2 GRR-RIPPER 2GO blocks together. Using a pair keeps pressure more even along the stock, which can help on longer boards where one block may not be enough.
At 12.32 oz, it is lighter than the larger adjustable blocks in this roundup. Choose it when thin-rip control is the priority, and choose a broader kit if you need several block shapes in one purchase.
POWERTEC Table Saw Push Block 2PK: Best for two-handed feeding
- 2 push blocks
- 3/16 in foam pads
- Ergonomic handles
- ABS plastic construction
This 2-pack gives you a pair of matching push blocks for feeding stock with more even downward pressure. The rubber friction pads and ergonomic handles suit table saw, router table, bandsaw and jointer work.
Pros
- Two-block set
- High-visibility orange color
- Durable ABS plastic
Cons
- Simple fixed format
- Foam pad thickness is 3/16 in
The POWERTEC Table Saw Push Block 2PK is a straightforward choice when you want 2 matching blocks. Each block measures 3 x 6 in and uses a 3/16 in foam pad with a natural rubber friction surface.
That simple pad-and-handle format is easy to understand at first use. You place the pad on the stock, grip the ergonomic handle and apply downward and forward pressure without learning a new adjustment system.
The ergonomic handles give you a steady hand position while the orange color improves visibility during use and storage. The blocks are designed for table saws, router tables, bandsaws, jointers, radial saws and shapers.
Having 2 blocks changes how you can feed work. Use one block when feeding stock through a router table with a fence.
Use 2 when you want added downward pressure, such as during jointer work.
The blocks are made from ABS plastic, which suits daily shop use where a tool may be picked up and set down often. The Santoprene handle material adds to the grip you feel when you apply pressure through a longer cut.
This set has fewer adjustment features than the Zebekk or BOW Products designs. Its advantage is simple: 2 blocks in the same package, with familiar pad-and-handle operation for shoppers who prefer a fixed shape.
POWERTEC Push Block & Push Stick Fits: Best complete safety set
- 3 push blocks
- 1 Safe V Stick
- 1 straight push stick
- Orange plastic design with rubber soles
The POWERTEC 5-piece set covers broad and narrow stock with 3 blocks plus a V stick and straight stick. It fits buyers setting up a general table saw and router table safety kit.
Pros
- Five useful pieces
- Includes 2 push-stick shapes
- Works with table saws, jointers, router tables and shapers
Cons
- More storage space needed
- Pieces have different roles to learn
The POWERTEC Push Block & Push Stick Fits set is the best table saw push block package for a general-purpose shop. It includes 1 long hold-down block, 2 short hold-down blocks, 1 Safe V Stick and 1 straight push stick.
That mix is the reason to choose a set like this. The blocks cover work where you need broad contact and firm downward pressure, while the sticks cover jobs where a block would be too wide or where space is limited.
The blocks help maintain downward pressure while the sticks handle jobs where a narrow tool is more useful. The straight stick fits limited-space situations, while the V stick is shaped for more controlled pushing near the blade.
For face jointing, ripping plywood and routing, the right shape can make the feed easier to control. A long block may suit a longer piece, short blocks may suit compact stock, and a stick may reach a spot a block cannot.
All 5 pieces use an orange plastic design with rubber soles. The set works with table saws, router tables, band saws, jointers and shapers, and the high-visibility color helps each piece stay easy to spot in storage.
Choose it if your shop needs several options at once. If you already own push sticks, the POWERTEC 2-pack gives you a more focused pair of blocks.
Peachtree Woodworking Supply Fulton 1201 5 Piece Safety: Best for varied shop machines
- 2 small push blocks
- 1 long push block
- 1 standard push stick
- 1 narrow V-style push stick
The Fulton 1201 kit gives you 5 different safety tools for table saws, router tables, shapers, band saws and jointers. Its safety orange color helps the tools remain visible in the shop.
Pros
- Five-piece mix
- Two small blocks
- Standard and narrow V-style sticks
Cons
- Kit rather than a single specialized block
- Large listed dimensions
The Peachtree Woodworking Supply Fulton 1201 is another complete 5-piece kit, with 2 small push blocks, 1 long push block, 1 standard push stick and 1 narrow V-style push stick. The mix covers different stock sizes and hand positions.
Each piece has a different role, and that variety is useful when your work changes from one machine to the next. Small blocks can suit compact stock, the long block gives a larger contact area, and the sticks can reach into narrower feeds.
Its safety orange color helps you see each tool during a cut and makes it easier to find in a busy shop. The kit is intended for router tables, shapers, band saws, table saws and jointers.
The small blocks include an angled handle and an offset handle design. Those handle shapes can change how your hand sits over the work, which may suit different feed angles or fence positions.
The standard and narrow V-style sticks add options when a block is not the right shape for the feed. A narrow stick can be useful on smaller stock, while a standard stick gives a more familiar pushing tool for everyday cuts.
This kit competes closely with the POWERTEC 5-piece set. Choose the Fulton when the 2 small blocks and narrow V-style stick match your usual work, and choose POWERTEC if its long and short hold-down blocks fit your needs better.
BOW Products Expandable Push Block: Best for adjustable width
- Expands from 2 to 6 in
- 3 independent locking push fins
- See-through body
- Tool-free width adjustment
The BOW Products block is the adjustable-width pick for shoppers who move between narrow rips and wider boards. Its 3 push fins, side guide and TPR base focus on feed stability across several machines.
Pros
- 2 to 6 in adjustment
- Clear body helps blade alignment
- Works with table saws, jointers, planers, bandsaws, shapers and router tables
Cons
- Heavier than several single blocks
- One expandable push shoe
The BOW Products Expandable Push Block is the best table saw push block for changing the width of the workpiece. Its body expands from 2 to 6 in with a top knob, so one push shoe can cover narrow rips, wide boards and plywood.
That range is the main benefit of the design. Instead of switching between fixed blocks as the stock changes, you can set the width to suit the piece and lock it in place with the knob.
Three independent locking push fins help guide both the keeper and waste sides of the cut. A TPR non-slip base and adjustable side guide are intended to reduce movement and material drift.
Controlling both sides of the cut can help the stock feed in a straighter line. The side guide adds another point of contact, which is useful when the work needs to stay against the fence through the whole pass.
The see-through body helps you check blade alignment before cutting. That clear view can make setup easier, since you can see where the blade sits in relation to the stock before you start the feed.
The block also works with jointers, planers, bandsaws, shapers and router tables. It weighs 2.2 lb and uses plastic and thermoplastic rubber, with a tall angled handle and TPR overmold grip for hand control.
Choose it when width adjustment is worth the extra size, and choose a fixed block when you prefer a lighter, simpler tool for a narrower range of cuts.
PEMEDOR Push Block for Table Saw Safety: Best for sliding adjustments
- Sliding height adjustment
- Sliding bottom-width adjustment
- High-friction non-slip material
- Ergonomic handle
The PEMEDOR push block suits users who want to change height and bottom width by sliding the parts. It is designed for table saws, router tables, jointers and band saws.
Pros
- Adjustable height and width
- Ergonomic handle
- Manual operation
Cons
- Included components are not specified
- Single push block
The PEMEDOR Push Block for Table Saw Safety is aimed at users who want sliding adjustments for both height and bottom width. Its high-friction material and ergonomic plastic handle support controlled feeding.
Sliding adjustment is the core idea here. Instead of a single fixed size, you can change the height and the bottom width to better match the workpiece in front of you.
It is designed for table saws, router tables, jointers and band saws. The block measures 8.6 x 5.9 x 5.1 in and has a black-and-red finish, with a manual power source and a plastic handle.
The sliding design can help you match the block to different workpieces instead of using one fixed position. That can suit a shop that handles both small pieces and larger stock during the same week.
The trade-off is that the product information does not specify the included components, so confirm what arrives before you plan an assembly or replacement part. Knowing what is in the box matters if you need a part later or want to compare it fairly with a fully listed kit.
Choose PEMEDOR when adjustable positioning matters more than a known kit of accessories. For a fully specified assembly set, Kiahao is easier to compare.
Kiahao Table Saw Push Block: Best for adjustable balance support
- TPE non-slip bottom
- Sliding cut-width adjustment
- Adjustable balance support
- Works with table saws, router tables, band saws and jointers
The Kiahao gives you a large adjustable push block with a TPE grip and balance support for narrow strips. Assembly includes the handle and side pieces, with screws, a wrench and an installation guide.
Pros
- Adjustable cut width
- TPE grip
- Assembly items included
Cons
- Requires assembly
- Single large block
The Kiahao Table Saw Push Block is a large adjustable option with a TPE non-slip bottom, sliding cut-width adjustment and adjustable balance support. It is designed for table saws, router tables, band saws and jointers.
The TPE grip is meant to hold the wood surface through the cut, while the sliding adjustment lets you control the cut width for narrow strips. The adjustable balance support helps fit different wood thicknesses.
Assembly includes the screws, wrench, handle, main body, movable bodies and installation guide book. The stated setup involves attaching the handle and side pieces before use, and the maker describes setup as taking about 2 minutes.
The adjustable balance support helps match the block to different wood thicknesses. Its 1.76 lb weight keeps it below the BOW Products block while still offering a larger format for broader contact.
The friction surface can be cleaned with alcohol to keep it grippy. Keeping the pad clean is part of keeping the block useful, since a dirty surface may not hold the stock as well.
Choose Kiahao if you want an adjustable block and do not mind basic assembly. If you want to use a block straight out of the box, MICROJIG arrives fully assembled.
Fulton Woodworking Tools Gator Grip Jointer Push Blocks: Best for rubber-pad grip
- 2 push blocks
- Podular patterned rubber pads
- 6-3/8 x 3-1/4 in base
- Raised molded handles
The Fulton Gator Grip pair emphasizes a podular rubber pad instead of a standard foam base. The 2 blocks suit feed work on table saws, jointers, router tables, shapers and band saws.
Pros
- Two-block pack
- Wide gripping base
- Rubber pads can be cleaned with warm water and a dry cloth
Cons
- Designed around a firm pad
- Less adjustable than the top picks
The Fulton Woodworking Tools Gator Grip pair is the best table saw push block here for shoppers who value a broad rubber contact area. Each base measures 6-3/8 x 3-1/4 in, and the raised molded handle helps apply downward and inward pressure.
That wide base gives you more gripping surface than a small pad. On larger stock, the extra contact can help you keep the work steady as it moves through the cutter or blade.
The podular patterned rubber pads are designed to keep traction as dust and debris fall into the surface spaces. The pads can be cleaned with warm water and a dry cloth, then dried before use.
Unlike a foam pad, this rubber pad is not described as drying out in the same way. The podular pattern is meant to keep gripping even as sawdust settles into the spaces between the pods.
The polymer blocks work with table saws, router tables, jointers, shapers and band saws. They can also guide wood, composite, metal and resin materials, which gives the pair a wider range of shop uses.
This pair has less adjustment than the Zebekk, Kiahao or BOW Products blocks. It makes sense when you want 2 broad gripping surfaces and do not need a sliding width system.
How we compared these table saw push blocks
We compared the blocks by grip, hand position, adjustment, package contents, machine coverage and the kind of cut each design supports. Our score weighs specs, features and buyer feedback against what you are shopping for.
Grip is the first thing to check, because a push block only helps if it stays put on the stock. A high-friction rubber base, a TPE bottom or a podular rubber pad can each hold work differently, and a clean pad usually grips better than a dusty one.
Hand position comes next, since the tool should keep fingers away from the blade path. Look for a handle that holds your hand above the work surface and gives room to apply forward and downward pressure without reaching over the cut.
Adjustment is useful when your work changes. Zebekk, Kiahao and PEMEDOR offer adjustable support or sliding parts, while BOW Products expands from 2 to 6 in.
That adjustment can save you from owning several fixed blocks, but it also adds setup steps. If you cut the same stock size most days, a fixed block may be simpler and just as effective.
The POWERTEC 2PK and Fulton Gator Grip pair give you 2 blocks without adjustment steps. Package contents matter too, because some sets include push sticks as well as blocks.
The POWERTEC and Fulton 5-piece kits cover more hand positions, while a single block keeps storage and cost simpler. Machine coverage is worth a final check before you decide.
Several picks work on table saws, router tables, jointers and band saws, and some also list shapers or planers. Match the tool to the machines you actually use.
What should you look for in a table saw gripper push block?
The best table saw gripper push block should match your cut width, contact surface and feeding direction. A thin-rip job may need a precision leg or narrow support, while a wider board may benefit from a broader rubber base.
Check whether you need one block or 2. Two blocks can help distribute pressure, but a single block leaves your other hand available for a separate task or a push stick.
Also check the machine list. Several picks work beyond a table saw, including jointers, router tables and band saws, while the 5-piece kits add sticks for narrower or more confined feeds.
For a different hand position, compare these picks with our guide to the best table saw push stick. Push blocks and push sticks solve related problems, but their contact shapes are not the same.
How do you use a push block safely?
Use a push block to guide stock while keeping your hand away from the blade path, but keep the fence, blade guard and riving knife or splitter correctly set. Feed steadily and never force stock that is binding or moving away from the fence.
Start each cut with the setup checked, not with your hand. Make sure the fence is locked, the guard is in place and the riving knife or splitter is aligned with the blade before stock reaches the cut.
A push block does not replace the parts that control the cut. Learn the difference in our guide to table saw splitter vs riving knife before changing the safety setup.
When you feed the work, keep pressure smooth and even. Press the block down on the stock and push it forward in line with the cut, rather than sideways or with a sudden push.
If stock starts to bind, move away from the fence or drift, stop and sort out the cause. A push block should guide the work, not force it through a setup that is not right.
Keep the gripping surface clean and dry. Fulton says its Gator Grip pads can be washed with warm water and a dry cloth, while Zebekk and Kiahao identify alcohol cleaning for their friction surfaces.
Cleaning matters because sawdust and pitch can sit between the pad and the wood. A clean, dry pad is more likely to hold stock steady, and is easier to control through the cut.
Store the block where the pad will not pick up dirt between jobs. A quick wipe before use keeps the grip working as intended.
Can you make a table saw push block?
Yes, a simple shop-made push block can work when its handle, base and contact points keep your hand clear of the blade path. The finished shape must remain stable on the workpiece and should not interfere with the fence, blade or guard.
A shop-made block needs a firm connection between your hand and the stock. If the base slips, the handle flexes or the shape rocks on the work, it will not guide the cut well.
Our diy table saw push block guide covers the basic design decisions. It looks at the size, shape and grip you need for a block that suits your own table saw and your usual stock.
A ready-made block is easier when you need an adjustable support, a known grip surface or a multi-machine design. Those features can be harder to build well at home, especially the sliding parts and non-slip bases.
It is also worth matching the tool to the cut you plan to make. A simple shop-made shape may suit general feeding, while thin rips or work across several machines may call for a bought block with a designed support.
Either way, the test is the same. The block should keep your hand clear of the blade, hold the stock steady and move with the work through the cut without fighting the fence or the guard.
Which table saw push block should you choose?
Choose the Zebekk Push Block for Table Saws if you want the best table saw push block for adjustable narrow-rip control. Choose MICROJIG for 5/16 in thin cuts, POWERTEC 2PK or Fulton Gator Grip for 2-block feeding, and BOW Products when adjustable width from 2 to 6 in matters most.
Choose the POWERTEC or Fulton 5-piece kit if your shop needs both push blocks and push sticks. If your table saw setup includes a featherboard, compare its position with a table saw magnetic featherboard or review the best table saw featherboard before you set the feed path.
The right tool is the one that gives you stable contact and a safe hand position for the exact cut. Match the block to the stock, keep the safety equipment aligned and use a push stick when the work requires a different reach.
Our top 3 picks at a glance
About this guide: Our look at table saw push blocks draws on maker specs, materials and what owners report. See how we research.



