Best picks

9 Best Benchtop Band Saws for Metal (November 2026)

Updated on · By the Blade & Bench team

The best benchtop metal cutting band saws include the SKIL 2.8 Amp 9 In. 2-Speed Benchtop for wood-first workbenches, the DEWALT 20V MAX Band Saw for cordless deep cuts, and the WEN 9-Inch Band Saw for adjustable benchtop cuts.

On this page (5 sections)
  1. The best benchtop metal cutting band saws for different workbenches
  2. How do benchtop band saws cut metal safely?
  3. What should you check before buying a benchtop band saw for metal cutting?
  4. Benchtop band saw or chop saw for metal?
  5. Which benchtop metal cutting band saw should you choose?

The best benchtop metal cutting band saw for most workbenches is the VEVOR Portable Band Saw with the removable alloy steel base.

It combines a 5-inch round capacity without the base, variable speed and a base that supports stable cuts.

The KFMK is a strong dedicated tabletop alternative when you want a large and a small work surface on one machine.

A compact frame alone does not make a good metal cutting saw.

Blade, speed range, capacity and work holding all affect how well it fits your projects.

Blade choice matters because wood and metal sows ask different things from tooth form and speed.

Harder stock usually needs a slower, steadier pass than soft stock.

Capacity also changes with stock shape and whether you use a base.

A steady piece is easier to guide than one that shifts near the blade.

For a fixed bench, a base or table gives repeatable support for straight and angled cuts.

For work around a shop or jobsite, a portable or cordless format may fit better.

That trade off is the main split in this roundup, with tabletop, portable base, corded handheld and cordless models side by side.

The VEVOR with the removable alloy steel base sits in the middle of that split for many benches.

Use it handheld for stock that cannot move, then set it on its base for more controlled bench work.

The KFMK takes the tabletop route with two workbenches for larger stock and smaller precise pieces.

The DEWALT and Milwaukee cordless models suit users who already work on a battery platform and cut away from a bench.

The SKIL, WEN and Woodskil models are better read as wood first benchtop saws that may suit light or soft metal work only when the blade and manual allow it.

Set up matters as much as headline capacity.

Secure the saw, support long stock, fit the right blade for the material and check the dust or chip path before the first cut.

Check blade tension, guide position, wheel cleanliness and guard position regularly.

If you are comparing machine types first, our guide to the best metal cutting saw explains where band saws fit beside chop saws and other options.

Read the picks by where the work will happen, then by the stock you cut most often.

Our picks at a glance

  1. 1 SKIL 2.8 Amp 9 In. 2-Speed Benchtop
    Best for wood-first workbenches

    SKIL 2.8 Amp 9 In. 2-Speed Benchtop

    9.7/10 our score

    See it on Amazon
  2. 2 DEWALT 20V MAX Band Saw
    Best for cordless deep cuts

    DEWALT 20V MAX Band Saw

    9.6/10 our score

    See it on Amazon
  3. 3 WEN 9-Inch Band Saw
    Best for adjustable benchtop cuts

    WEN 9-Inch Band Saw

    9.6/10 our score

    See it on Amazon
  1. 4VEVOR Portable Band Saw

    VEVOR Portable Band Saw

    Best for a stable metal-cutting base
    Check it
  2. 5MILWAUKEE'S Band Saw

    MILWAUKEE'S Band Saw

    Best for compact cordless pipe work
    Check it
  3. 6Woodskil 9-Inch Band Saw

    Woodskil 9-Inch Band Saw

    Best for wood and soft metal projects
    Check it
  4. 7VEVOR Portable Band Saw

    VEVOR Portable Band Saw

    Best for corded handheld cutting
    Check it
  5. 8KFMK Tabletop Band Saw

    KFMK Tabletop Band Saw

    Best for a dedicated tabletop metal setup
    Check it
  6. 9Milwaukee Electric

    Milwaukee Electric

    Best for M18 deep-cut capacity
    Check it

The best benchtop metal cutting band saws for different workbenches

The best choice depends on whether you need a dedicated tabletop saw, a portable tool with a base or a cordless saw for work away from the bench. The products below are ordered by score and matched to distinct shop needs.

Our score weighs specs, features and buyer feedback against what you're shopping for.

ProductBest forBlade lengthPowerWork surfaceOur score
SKIL 2.8 Amp 9 In. 2-Speed Benchtopwood-first workbenches9 inches2.8 A corded electricWood9.7
DEWALT 20V MAX Band Sawcordless deep cuts20V MAX battery powered9.6
WEN 9-Inch Band Sawadjustable benchtop cuts9.6
VEVOR Portable Band Sawa stable metal-cutting base110V, 10 A AC9.5
MILWAUKEE'S Band Sawcompact cordless pipe work18V DC cordless9.4
Woodskil 9-Inch Band Sawwood and soft metal projects9.4
VEVOR Portable Band Sawcorded handheld cuttingCorded electric9.2
KFMK Tabletop Band Sawa dedicated tabletop metal setup1200 watts8.6
Milwaukee ElectricM18 deep-cut capacity18V battery powered8.0
1

SKIL 2.8 Amp 9 In. 2-Speed Benchtop: Best for wood-first workbenches

SKIL 2.8 Amp 9 In. 2-Speed Benchtop, benchtop metal cutting band saws
9.7/10Our score
  • 2.8 amp induction motor
  • 9-inch alloy steel blade
  • 2-speed drive system
  • Rack and pinion table adjustment

The SKIL is a compact benchtop saw built around woodworking, with a 2-speed drive, quick blade tension setting and a steel base.

See it on Amazon

Pros

  • Compact benchtop format
  • Dust port accepts standard 2 ½-inch vacuum hoses
  • Miter gauge included

Cons

  • Designed for wood rather than metal
  • Not a dedicated metal-cutting saw

The SKIL 2.8 Amp 9 In. 2-Speed Benchtop is the highest scoring compact saw here, but its stated purpose is woodworking.

Its 2.8 amp induction motor, 9-inch alloy steel blade and steel base make it a practical choice for a workbench centered on wood.

The 2-speed drive system allows tool free belt tensioning, which helps when you change setup between tasks.

Quick blade tension setting helps you set tension without a longer adjustment routine.

Precision ball bearing and lower blade guides support consistent tracking during a cut.

The blade tracking sight window gives a visual reference while you guide the work.

Rack and pinion table adjustment helps with quick angle changes before a bevel cut.

The miter gauge guides the workpiece for crosscuts when a straight square cut is needed.

A dust port accepts standard 2 and a half inch vacuum hoses, which is useful when wood dust is the main concern.

The steel base helps stabilize the saw on a benchtop, so check that the bench itself is flat and secure.

The corded 120 volt setup suits a fixed bench, but it limits where the saw can be used.

The 3 year limited warranty is part of the stated package, so keep the model and proof of purchase notes together.

Choose this model when your bench needs a compact wood saw that may occasionally handle suitable soft metal work.

For regular steel cutting, move to a dedicated metal model with variable speed and a metal rated blade.

SKIL 2.8 Amp 9 In. 2-Speed BenchtopCheck it on Amazon
2

DEWALT 20V MAX Band Saw: Best for cordless deep cuts

DEWALT 20V MAX Band Saw, benchtop metal cutting band saws
9.6/10Our score
  • 5-inch cutting capacity
  • Variable speed
  • Brushless motor
  • Integrated LED work light

The DEWALT gives you a portable deep-cut format with variable speed, a work light and a 5-inch capacity. It is a bare tool.

See it on Amazon

Pros

  • Cordless portability
  • Tool-free blade changing lever
  • Integrated hang hook

Cons

  • Battery and charger are not included
  • Not a fixed tabletop design

The DEWALT 20V MAX Band Saw is the strongest choice for cordless deep cuts.

It handles up to 5 inches of rectangular material and up to 4 inches of round material, with variable speed for more control.

The brushless motor supports use on the 20V MAX battery platform.

The integrated LED work light with a 20 second delay helps in dark or shadowed work areas.

Variable speed lets you match the blade to the material instead of using one fixed pace.

The tool less blade changing lever loosens blade tension for a blade change.

The integrated hang hook gives you a place to hang the saw without damaging the front handle or base.

That hook is useful at the end of a cut or between cuts on a busy bench or jobsite.

This is a portable saw rather than a fixed benchtop machine.

It is also a bare tool, so plan around the 20V MAX battery system before choosing it.

Check that your battery and charger fit the tool before you rely on it for a full day of cuts.

Pick it for metal work that moves from one location to another.

If your work stays on a bench, a base equipped VEVOR or tabletop KFMK may be easier to control.

DEWALT 20V MAX Band SawCheck it on Amazon
3

WEN 9-Inch Band Saw: Best for adjustable benchtop cuts

WEN 9-Inch Band Saw, benchtop metal cutting band saws
9.6/10Our score
  • 2.8 amp motor
  • 3½-inch cutting depth
  • 9-inch cutting width
  • 45-degree bevel table

The WEN suits a workbench where wood and soft metal cutting share one machine. Its beveling table, fence, miter gauge and adjustable blade guard support varied cuts.

See it on Amazon

Pros

  • Wide blade-size range
  • 2½-inch dust port
  • Fence and miter gauge included

Cons

  • AC benchtop machine
  • Metal use is not its primary focus

The WEN 9-Inch Band Saw is a good fit for a mixed woodworking bench where metal cutting is occasional.

Its 2.8 amp motor drives the blade up to 2500 feet per minute, with cuts up to 3 and a half inches deep and 9 inches wide.

The 12 and a quarter by 11 and seven eighths inch table bevels to 45 degrees.

The saw uses 59 and a half inch blades from 1/8 to 3/8 inches wide, giving you options for intricate and wider cuts.

A narrower blade suits tighter curves, while a wider blade suits straighter resaw style work in wood.

The included 1/4 inch blade gives a starting point for general bench cuts.

A fence supports straight cuts, and the miter gauge supports crosscuts at set angles.

The adjustable blade guard with ball bearing supports helps you set the guard close to the work.

A 2 and a half inch dust port fits a standard vacuum hose for cleaner work.

The AC benchtop format means a stable power supply at the bench, with less freedom to move around a site.

These features make the WEN more useful for general bench work than for a dedicated metal only station.

Choose it when wood is the main material and you want a broad blade size range.

For steel, look at the slower variable speed metal models.

WEN 9-Inch Band SawCheck it on Amazon
4

VEVOR Portable Band Saw: Best for a stable metal-cutting base

VEVOR Portable Band Saw, benchtop metal cutting band saws
9.5/10Our score
  • 5-inch round capacity
  • 10 amp motor
  • Variable speed from 137.8 to 472.4 feet per minute
  • Removable alloy steel base

The VEVOR is the strongest fit for a benchtop metal-cutting setup when you want both handheld use and a removable base. The base swivels from 0 to 45 degrees.

See it on Amazon

Pros

  • Metal, steel and aluminum use
  • Base supports 45-degree cuts
  • Adjustable speed

Cons

  • Heavier 13 kg format
  • Base changes the stated cutting capacity

The VEVOR Portable Band Saw with the removable alloy steel base is the best overall match for a benchtop metal cutting setup.

It cuts up to 5 inches round without the base, while the base supports rectangular stock up to 3.9 by 3.2 inches.

Without the base it also gives 4.7 by 4.7 inches for rectangular stock.

Its 10 amp motor and speed range from 137.8 to 472.4 feet per minute suit different metal cutting tasks.

The saw is also described for steel, aluminum, composite cable, angle iron and PVC pipe.

The base swivels from 0 to 45 degrees, and the saw can make 45 to 90 degree cuts.

That base gives work support for angled bench cuts that a handheld saw alone cannot match.

The adjustable blade guard helps keep the blade from jamming and supports safer hand placement.

The ergonomic soft grip back handle helps with balance and control in handheld use.

The 13 kg weight adds stability but makes this less convenient to move than a cordless tool.

The 110 volt corded setup suits a shop or garage bench where power is close.

Choose it when you want one tool for handheld work and controlled cuts on a bench.

Check the base capacity before cutting larger rectangular stock.

VEVOR Portable Band SawCheck it on Amazon
5

MILWAUKEE'S Band Saw: Best for compact cordless pipe work

MILWAUKEE'S Band Saw, benchtop metal cutting band saws
9.4/10Our score
  • M18 cordless platform
  • POWERSTATE brushless motor
  • 540 feet per minute
  • 3¼-inch round and rectangular capacity

This compact Milwaukee is suited to pipe and metal work away from a fixed bench. It is a bare tool with no charger or battery included.

See it on Amazon

Pros

  • Light 7.7 lb format
  • Brushless motor
  • Cordless portability

Cons

  • Smaller capacity than the deep-cut picks
  • Bare tool

The MILWAUKEE'S Band Saw is a compact cordless option for pipe and metal work away from a fixed bench.

Its 3 and a quarter inch round and rectangular cutting capacity is smaller than the 5-inch picks, but the 7.7 lb weight makes it easier to carry.

The POWERSTATE brushless motor runs at 540 feet per minute.

The saw uses an 18V DC cordless setup on the M18 battery series.

It uses a 35 and three eighths inch high speed steel blade.

The D handle format and compact tool length suit cuts in tight service locations.

This is a bare tool, so you need the compatible battery setup separately.

No charger is included, so check what you already own before the first job.

Its compact size suits service work, pipe cuts and locations where a cord or benchtop base would get in the way.

The smaller capacity is the clear trade off for the lighter and more portable shape.

Pick it when portability matters more than maximum capacity.

For a stable workbench, use a model with a base or table.

MILWAUKEE'S Band SawCheck it on Amazon
6

Woodskil 9-Inch Band Saw: Best for wood and soft metal projects

Woodskil 9-Inch Band Saw, benchtop metal cutting band saws
9.4/10Our score
  • 3 amp motor
  • 2500 FPM blade speed
  • 3½-inch cutting depth
  • 0 to 45-degree tilting table

The Woodskil is a benchtop woodworking saw that also lists metal among its surface recommendations. Its fence, miter gauge and tilting table support controlled shop cuts.

See it on Amazon

Pros

  • Steel base helps reduce vibration
  • Dust exhaust port
  • Fence and miter gauge included

Cons

  • Not a dedicated metal-cutting model
  • Battery-powered data needs confirmation before setup

The Woodskil 9-Inch Band Saw suits a woodworking bench that sometimes handles soft metal.

Its 3 amp motor and 2500 FPM blade speed support cuts up to 3 and a half inches deep and 9 inches wide.

The cast aluminum table tilts from 0 to 45 degrees for angled work.

The table size is 12 and five sixteenths by 11 and seven eighths inches.

The fence and miter gauge help with straight, curved and angled work.

A rip fence supports repeatable straight cuts along the length of a board.

The steel base helps reduce vibration and keeps the benchtop saw steadier during a cut.

A 2 and a half inch dust exhaust port supports a cleaner bench.

The blade size is 59 and a half inches long, with widths from 1/8 to 3/8 inches.

Woodskil describes the saw for metal and wood, but the design and cutting details lean toward woodworking.

Use the correct blade and follow the manual before cutting any metal.

Choose it when table control and wood capacity matter more than a dedicated metal cutting layout.

For regular steel, select the VEVOR or KFMK instead.

Woodskil 9-Inch Band SawCheck it on Amazon
7

VEVOR Portable Band Saw: Best for corded handheld cutting

VEVOR Portable Band Saw, benchtop metal cutting band saws
9.2/10Our score
  • 5-inch cutting capacity
  • 10 amp motor
  • Variable speed
  • Tool-free blade changing lever

This VEVOR is a practical choice when you need a corded handheld saw for metal, tubing, pipes or rebar. It has the capacity and speed range for larger stock.

See it on Amazon

Pros

  • Deep-cut format
  • Bi-metal blade
  • Ergonomic grip

Cons

  • No workbench base is specified
  • Corded handheld use limits placement

The second VEVOR Portable Band Saw is a strong corded handheld choice for metal, tubing, pipes, rebar and plastic.

It has a 5-inch cutting capacity, a 10 amp motor and variable speed from 137.8 to 472.4 feet per minute.

Without the base it gives 4.7 by 4.7 inches for rectangular stock and 5 inches for round stock.

The 1100 watt pure copper motor is built for jobsite style use.

The bi-metal blade is suited to the metal cutting focus of this model.

The tool free blade changing lever makes blade changes simpler.

The adjustable blade guard helps protect against blade jamming and supports safer use.

The ergonomic soft grip back handle helps with handheld control and balance.

Unlike the base equipped VEVOR, this model is presented as a handheld saw.

That makes it easier to bring to stock that cannot be moved to a bench.

It gives you less built in support for tabletop cuts, so work support must come from elsewhere.

The 15.8 lb weight is manageable for handheld work, but long cuts still need support.

Pick it for corded mobile work.

If you want a benchtop band saw for metal cutting, the base equipped VEVOR is the more direct match.

VEVOR Portable Band SawCheck it on Amazon
8

KFMK Tabletop Band Saw: Best for a dedicated tabletop metal setup

KFMK Tabletop Band Saw, benchtop metal cutting band saws
8.6/10Our score
  • 5-inch cutting capacity
  • 10 amp motor
  • 137 to 472 FPM variable speed
  • Dual workbench design

The KFMK is made for a tabletop metal-cutting layout, with a large workbench and a smaller precision workbench. Its 10 amp motor and variable speed suit mixed project sizes.

See it on Amazon

Pros

  • Dedicated tabletop design
  • Dual workbench layout
  • Eyeshield included as a safety feature

Cons

  • 16.96 kg weight
  • Product details give fewer blade specifications

The KFMK Tabletop Band Saw is the best dedicated tabletop alternative to the VEVOR.

It combines a 5-inch cutting capacity, a 10 amp motor and adjustable speed from 137 to 472 FPM.

Its dual workbench design includes a large workbench for larger materials and a smaller precision workbench for smaller pieces.

That layout can help when one bench must handle both rough stock and more controlled cuts.

The large surface gives support for longer or wider pieces before and after the cut.

The small precision surface suits smaller parts that need closer guidance.

The KFMK is described for metal, wood and PVC.

It includes an eyeshield as a safety feature for the cutting area.

The 1200 watt motor supports the tabletop format in a garage or workshop.

Its 16.96 kg weight makes it a substantial stationary tool.

That weight helps stability, but it also means the saw needs a set place on the bench.

Choose it when you want a tabletop metal saw with two work surfaces.

The product information gives fewer blade details than the VEVOR models, so confirm replacement blade requirements before ordering.

KFMK Tabletop Band SawCheck it on Amazon
9

Milwaukee Electric: Best for M18 deep-cut capacity

Milwaukee Electric, benchtop metal cutting band saws
8.0/10Our score
  • M18 FUEL platform
  • POWERSTATE brushless motor
  • 550 SFPM
  • 5 x 5-inch cut capacity

This Milwaukee suits M18 users who need a deep-cut cordless saw. Its 5 x 5-inch capacity, rafter hook and selectable blade brake fit mobile work.

See it on Amazon

Pros

  • Deep 5 x 5-inch capacity
  • 550 SFPM motor output
  • Integrated rafter hook

Cons

  • Battery-powered bare-tool setup
  • Lower score for a fixed benchtop use case

The Milwaukee Electric M18 Fuel DEEP Cut Band Saw suits M18 users who need cordless capacity rather than a fixed benchtop machine.

Its 5 by 5-inch cut capacity is the largest stated capacity in this group.

The POWERSTATE brushless motor delivers 550 SFPM.

The saw uses an 18 volt battery powered platform.

An integrated rafter hook gives a place to hang the tool on a beam or frame between cuts.

A selectable automatic blade brake can reduce the risk of damage to sensitive material near the cut.

That brake is useful when a cut ends close to a finished surface or another part.

The 21 by 14 by 9 inch size fits mobile work better than a permanent bench station.

The stainless steel blade and rectangular blade shape are part of the stated build.

This is a battery powered tool, so battery runtime and charge time will shape a day of work.

Pick it for deep cuts on jobsites or in a shop that already uses the M18 system.

Choose the DEWALT if its 20V MAX platform and 5-inch capacity fit your existing tools better.

Milwaukee ElectricCheck it on Amazon

How do benchtop band saws cut metal safely?

A benchtop band saw cuts metal safely when the blade, speed, work support and material match the saw.

Secure the saw to a stable surface before cutting.

Support long stock so it does not pull or twist as the cut ends.

Keep your hands away from the blade path and out of the line of the cut.

Set the guard close to the work without touching the blade.

Use the slowest suitable speed for harder material when the saw allows speed control.

Models such as the VEVOR and KFMK offer adjustable ranges, while woodworking models may use much higher fixed blade speeds.

A high wood speed can be wrong for hard metal, so match blade and speed to the material first.

Do not force the stock through the blade.

Let the blade remove material at its own rate.

Stop if the blade binds, wanders or shows damage, and inspect it after a bind.

A base or workbench should hold the material steady.

The VEVOR base can swivel from 0 to 45 degrees, while the KFMK offers large and small workbench surfaces.

Clamp small pieces firmly, since small stock can shift faster than large stock.

Keep the work area clear of chips and dust so you can see the cut line.

Wear eye protection and keep loose clothing, gloves and accessories away from moving parts.

Let the blade stop fully before you reach near the cut or change a setting.

For a broader explanation of blade choice and machine limits, read can a band saw cut metal.

That guide helps you decide when a wood first saw should stay with wood and soft metal only.

What should you check before buying a benchtop band saw for metal cutting?

Check the material recommendation first, then compare capacity, speed range, blade details and how the workpiece will be held.

A large capacity does not help if the saw cannot support your stock or accept the blade you need.

Confirm the blade length and width the saw accepts before you plan for a replacement blade.

Check whether the blade is included, and whether it is rated for the material you cut most.

For a fixed workbench, compare the VEVOR with a base and the KFMK tabletop model.

For mobile work, compare the DEWALT and Milwaukee cordless tools with the corded handheld VEVOR.

Cutting capacity also changes with the shape of the stock and the use of a base.

Round stock and rectangular stock do not always share the same limit.

The VEVOR gives separate figures for handheld and base use, so match the stated capacity to your actual setup.

Check the table or base angle range if angled cuts are part of your regular work.

If angle work is part of your plan, our guide explains why saw cutting capacities change at an angle.

A miter saw can behave differently, as shown in how a sliding miter saw changes cutting capacity.

Those limits are a reminder to measure the real stock in the real setup.

Benchtop band saw or chop saw for metal?

Choose a benchtop band saw when you want a continuous blade, controlled cuts and a machine that can follow curves or varied stock.

Choose a chop saw when fast straight crosscuts are the main job and the material can be clamped securely.

A band saw is often easier to position around longer stock, especially in portable form.

A chop saw may suit repeated cut off work, but the correct blade and guard setup remain essential.

The band saw path follows the blade through the stock, so feed and support shape the result.

The chop saw path drops the blade through the stock, so clamping and guard position shape the result.

For curves, a benchtop band saw can follow a marked line in a way a chop saw cannot.

For many identical straight cuts, a chop saw can be quicker to set and repeat.

For metal, both types need a blade that suits the material and a speed that suits the blade.

Neither type removes the need for firm work holding and eye protection.

Portable band saws add reach for stock that cannot go to a guarded chop saw.

Benchtop band saws add a fixed table and base for smaller parts that need steady guidance.

Compare this roundup with our guide to the best chop saw for metal cutting before choosing a machine type.

For smaller jobs, a hand tool may be enough.

Our guide to the best hand saw for cutting metal covers that lower capacity option.

The right machine matches your longest stock, your most common material and your work location.

Which benchtop metal cutting band saw should you choose?

Choose the VEVOR Portable Band Saw with the removable base if you want the most balanced workbench setup for metal.

Its 5-inch round capacity, variable speed and 0 to 45-degree base adjustment cover more bench tasks than the woodworking focused models.

Use it handheld for stock that cannot move to the bench.

Use it on the base when you need steadier support for smaller or angled cuts.

Choose the KFMK if you want a dedicated tabletop design with large and small work surfaces.

That dual surface layout suits a shop that mixes rough stock with smaller precise pieces.

Choose the DEWALT or Milwaukee models if you need cordless cutting away from the bench.

Check the battery platform first, since both DEWALT and Milwaukee models in this group depend on their own systems.

Choose the corded handheld VEVOR if you want deep capacity and variable speed without a battery limit.

Choose the SKIL, WEN or Woodskil when wood is the main material and metal is only occasional and suitable.

If your priority is portable work rather than a fixed station, compare these picks with the best portable band saw.

The right choice is the model whose capacity, speed, blade setup and work support match the material you cut most often.

Measure your largest stock, note your usual angles and check the blade you will need before you order.

Our top 3 picks at a glance

  1. 1 SKIL 2.8 Amp 9 In. 2-Speed Benchtop
    Best for wood-first workbenches

    SKIL 2.8 Amp 9 In. 2-Speed Benchtop

    9.7/10 our score

    See it on Amazon
  2. 2 DEWALT 20V MAX Band Saw
    Best for cordless deep cuts

    DEWALT 20V MAX Band Saw

    9.6/10 our score

    See it on Amazon
  3. 3 WEN 9-Inch Band Saw
    Best for adjustable benchtop cuts

    WEN 9-Inch Band Saw

    9.6/10 our score

    See it on Amazon

Frequently asked questions

Can a benchtop band saw cut metal?

Yes, but only when the saw and blade are suited to metal. Dedicated metal-cutting models such as the VEVOR and KFMK use variable speed and deep-cut capacities.

Woodworking models can be better limited to wood or soft metal, so check the stated surface recommendation before cutting.

What is the best benchtop band saw for metal cutting?

The VEVOR Portable Band Saw with the removable alloy steel base is the best fit for most workbench metal cutting here. It offers a 10 amp motor, 5-inch round capacity, variable speed and a base that can swivel from 0 to 45 degrees.

Is a portable band saw good for a workbench?

A portable band saw can work well on a workbench when it has a stable base or a secure way to hold the material. The VEVOR model with a removable alloy steel base is the clearest match.

Handheld DEWALT and Milwaukee models are better for mobile cuts.

What speed should a metal-cutting band saw use?

Use a slower setting for harder metal and a faster setting for materials that allow it, while following the saw and blade instructions. Variable-speed models such as the VEVOR and KFMK give you more control than fixed-speed woodworking saws.