9 Best Fences for Delta Table Saws (November 2026)
The best Delta table saw fences include the POWERTEC 71391 Table Saw Precision Miter Gauge for precise angled crosscuts, the POWERTEC Universal Tandem Featherboards for Table Saw for feed control, and the BOW Products XT XTENDER T-Track Table Saw for long fence extensions.
On this page (7 sections)
- The best Delta table saw fences and related setups
- How do you choose a fence for a Delta table saw?
- Is a fence extension better than a replacement Delta fence?
- When should you use a miter gauge instead of a rip fence?
- What accessories help a Delta table saw fence work better?
- How we compared these Delta table saw fence options
- Which Delta table saw fence should you choose?
The best Delta table saw fence for a Delta UniFence system is the Peachtree Uni Style Table Saw Fence, while the BOW XT536 is a flexible choice for a Delta UniSaw-style setup. For angled cuts, a miter gauge with its own fence may be the better fit than a rip-fence replacement.
Delta table saws use different fence layouts, so the saw name alone is not enough. Match the fence section, mounting pattern, table size and working height before you compare extra tracks or accessory slots.
Start by identifying what you already own. A UniFence setup needs a section made for that system.
A UniSaw setup may suit an extension with a matching slot. A compact or older saw may need a clamp-on face instead.
Measure the existing fence before you shop. Note its height and length, the distance to the blade, and the space left at each end.
Also check whether your saw uses a rip fence, a miter slot, or both for the work you plan to do.
Think about the cuts you make most. Long rip cuts need a tall, steady face.
Short crosscuts need a square miter gauge and a stop that repeats well. Square panels and tall boards benefit from more contact along the fence.
Accessory tracks matter, but only after the basics fit. Featherboards and stops can improve control when they mount cleanly.
If your project needs repeatable fixtures as well as a fence, see our guide to the best table saw jigs. For a different brand comparison, our best table saw fence for Craftsman guide explains why mounting details matter.
Our picks at a glance
-
1
Best for precise angled crosscutsPOWERTEC 71391 Table Saw Precision Miter Gauge
9.7/10 our score
See it on Amazon -
2
Best for feed controlPOWERTEC Universal Tandem Featherboards for Table Saw
9.7/10 our score
See it on Amazon -
3
Best for long fence extensionsBOW Products XT XTENDER T-Track Table Saw
9.4/10 our score
See it on Amazon
- 4
Check itWoodpeckers Auxiliary Rip Fence
Best for compact job site saws - 5
Check itGeneric Triden Table Saw Miter Gauge Extension
Best for adjustable batch crosscuts - 6
Check itBOW Products XT XTENDER XT536 Table Saw
Best for Delta UniSaw positioning - 7
Check itPeachtree Woodworking Supply Uni Style Table Saw Fence
Best for Delta UniFence upgrades - 8
Check itFulton Woodworking Tools Precision Table Saw Miter Gauge
Best for zero-play miter work - 9
Check itJCFANTS 75 T-Track Table Fence System
Best for short accessory fences
The best Delta table saw fences and related setups
The right pick depends on whether you need a direct Delta UniFence upgrade, a fence extension, or a miter gauge for crosscuts. The products below are ordered by score, with the 2 highest-scoring options tied at the top for different jobs.
POWERTEC 71391 Table Saw Precision Miter Gauge: Best for precise angled crosscuts
- 27 angle stops
- 24 in x 3 in multi-track fence
- T-track flip stop
- Standard 3/4 in x 3/8 in miter slot
This 3-piece set suits Delta owners who need repeatable crosscuts and angled work rather than a replacement rip fence. The included fence and flip stop add length control to the miter gauge.
Pros
- 27 angle stops
- Includes fence and flip stop
- Works with standard 3/4 in x 3/8 in slots
Cons
- Not for smaller 5/8 in miter slots
- Miter gauge system rather than a rip fence
The POWERTEC 71391 is a 3-piece miter gauge system, not a replacement rip fence. It includes a table saw miter gauge, a multi-track miter fence and a T-track flip stop for crosscutting and angled work.
Its 27 angle indexing stops use 1-degree spacing, with positive stops at 0°, 10°, 22.5°, 30° and 45°. That spacing helps you return to a known angle without resetting the gauge by eye.
The gauge works in a standard 3/4 in x 3/8 in miter slot with or without T-slots. A smaller 5/8 in slot will not accept it, so check your slot width and depth first.
The fence measures 24 in x 3 in and has a laser-engraved measuring scale. The multi-track profile accepts compatible T-track accessories, and the extra length supports wider boards.
The flip stop locks without tools and can sit on either side of the blade for repeat cuts to the same length. Choose this for accurate crosscut control, not as a rip-fence replacement.
POWERTEC Universal Tandem Featherboards for Table Saw: Best for feed control
- 2 featherboards
- Miter lock system
- T-track bolts and miter slot brackets
- Stackable mounting hardware
These featherboards help hold stock against a fence during table saw work. The mounting parts support horizontal, vertical and stacked setups on compatible saws.
Pros
- 2-piece set
- Works with T-slots and miter slots
- Includes mounting hardware
Cons
- Featherboards are accessories, not a fence
- Requires correct slot or T-track fit
The POWERTEC Universal Tandem Featherboards help keep stock against a fence during a cut. This 2-pack includes featherboards, threaded knobs, T-bolts and miter slot brackets.
Having two boards gives you more options for holding stock before and after the blade.
The miter lock system works with T-slots and standard 3/4 in x 3/8 in miter slots. That dual fit helps on table saws, band saws and router tables, as long as the slot or track matches.
Check the position on your Delta before you tighten anything down.
The kit also includes parts for horizontal mounting, vertical mounting on 3 in multi-tracks and stacking the featherboards. Horizontal use suits fence work.
Vertical use suits a multi-track fence face. Stacking adds reach where one board alone is too short.
These are support accessories, not a Delta fence. They make the most sense when your existing fence or a new extension has a compatible track, especially if you want feed control near the blade.
They work with the fence, not in place of it.
Choose them when your Delta setup already has a usable fence but needs better stock guidance. Check the track position so the featherboard presses the workpiece toward the fence without interfering with the blade.
BOW Products XT XTENDER T-Track Table Saw: Best for long fence extensions
- 46 in fence
- 5 in tall face
- 3 T-slots
- Aluminum extrusion
The 46 in XTENDER adds a taller working face to an existing fence. It suits Delta owners who want more support and accessory mounting without choosing a fence made for only one saw model.
Pros
- Long 46 in face
- Three T-slots
- Fits several saw and band saw setups
Cons
- Fence only
- BOW T-Track clamps sold separately
The BOW XT XTENDER adds a 46 in aluminum fence with a 5 in tall face to an existing fence. Its three T-slots sit on the face, top and back for 1/4 in and 5/16 in T-bolts.
Those slots let you add featherboards, stops and other accessories without drilling the face.
The fence uses milled rear slots for positioning at the infeed, center or outfeed area. That flexibility helps you place support where a long board needs it most.
It is designed to clamp to an existing fence with BOW T-Track clamps, which are sold separately.
The 4 in flat face gives boards a taller guide surface than a low factory fence. More contact helps tall panels stay upright and track straight.
The aluminum extrusion also keeps the face rigid under steady feed pressure.
Its stated fit includes portable saws, cabinet saws, UniSaw, Harvey saws and band saws. That broad fit makes it a general extension rather than a model-specific replacement.
Still, you should confirm clamp fit on your own fence.
This is a strong choice when your Delta setup needs long support and accessory tracks. Confirm your existing fence can accept the required clamps, and allow room for the 46 in length before choosing it.
Woodpeckers Auxiliary Rip Fence: Best for compact job site saws
- 36 in fence
- 3-1/2 in height
- Two 7 in material supports
- 7 integrated T-slots
This auxiliary rip fence adds support around smaller saws and existing fences under 3-1/4 in tall. It is a practical choice when a Delta setup needs infeed or outfeed support instead of a full replacement system.
Pros
- 36 in length
- Two material supports
- No drilling or permanent modification
Cons
- Standard track clamps not included
- Designed for fences under 3-1/4 in tall
The Woodpeckers Auxiliary Rip Fence adds a 36 in fence and two 7 in material supports for compact machines. It is 3-1/2 in tall and has 7 integrated T-slots for featherboards, stops or jigs.
The design suits job site table saws, band saws, vintage contractor's saws and router tables. It attaches to an existing fence with standard track clamps, and those clamps are not included.
Its clamping system adds exactly 2 in to fence width, so you can account for that offset when using the original fence scale. Keeping that number in mind during setup prevents repeat measuring errors.
The two material supports help stabilize workpieces on infeed and outfeed sides. That support matters on long boards, where a fence alone may not keep stock steady.
Choose it when your Delta table saw has a fence under 3-1/4 in tall and needs infeed or outfeed help. It is an auxiliary fence, so measure the existing fence before treating it as a replacement.
Generic Triden Table Saw Miter Gauge Extension: Best for adjustable batch crosscuts
- 27 locking stops
- 16 to 24 in telescoping fence
- MDF sacrificial fences
- Adjustable flip stop
The Triden combines a miter gauge, extension fence, sacrificial fences and flip stop for repeatable crosscuts. It fits Delta-style table saw work when the saw has a standard 3/4 in x 3/8 in miter track.
Pros
- Telescoping 16 to 24 in fence
- 27 locking stops
- Includes sacrificial fences
Cons
- Not a rip fence replacement
- Requires a 3/4 in x 3/8 in miter track
The Triden Table Saw Miter Gauge Extension combines a miter gauge, extension fence, MDF sacrificial fences and a flip stop. Its aluminum fence extends from 16 in to 24 in and is 2-5/16 in tall.
The telescoping design lets you use a shorter fence for small parts and extend it for wider work.
The miter gauge has 27 locking stops for angle work. It fits table saws and router tables with a 3/4 in x 3/8 in miter track.
Confirm that track size on your Delta before you order, since other slot sizes will not fit.
The flip stop slides along the fence for repeatable batch crosscuts and flips upward when you do not need it. That upward position keeps it clear during cuts where a stop would get in the way.
It is a simple way to keep repeated lengths consistent.
The included MDF sacrificial fences give you a replaceable surface near the cut line. You can cut into that surface to reduce tearout in delicate material.
When it wears, the sacrificial face is the part you refresh, not the whole fence.
This suits Delta owners who make repeated crosscuts rather than long rip cuts. Confirm the miter track size, and remember that this system does not replace the saw's rip fence.
BOW Products XT XTENDER XT536 Table Saw: Best for Delta UniSaw positioning
- 36 in fence
- 5 in tall face
- Three T-slots
- Special slot for Delta UniSaw and Harvey saws
The XT536 is a fence-only extension with a stated slot for Delta UniSaw and Harvey saws. Its 36 in length is easier to place in a smaller shop than the 46 in version.
Pros
- Delta UniSaw slot
- Three accessory T-slots
- 5 in tall aluminum face
Cons
- Fence only
- XT2 clamps and XT1 feed supports sold separately
The BOW XT536 is a 36 in fence extension with a 5 in tall aluminum face. Its special slot is designed for Delta UniSaw and Harvey saws, while its three T-slots accept 1/4 in and 5/16 in T-bolts.
That Delta-specific slot makes it a closer match than a purely general extension.
Milled rear slots let you position the fence forward, centered or back when paired with two XT2 clamps. Forward placement adds infeed control.
Centered placement balances both sides. Rear placement adds outfeed support for longer boards.
The bottom slot accepts XT1 Feed Supports, which are sold separately. Those supports can extend guidance beyond the fence itself.
If you plan to use them, add them to your list at the same time.
The 4 in flat face gives taller workpieces more guide surface. Bottom standoffs support smooth guidance, and the fence can be used for infeed, outfeed or vertical work setups.
The anodized aluminum finish also wipes clean after dusty jobs.
Choose the XT536 when you want a Delta UniSaw-focused extension in a shorter 36 in format. It includes the fence only, so confirm the clamp and feed-support parts needed for your setup.
Peachtree Woodworking Supply Uni Style Table Saw Fence: Best for Delta UniFence upgrades
- Single-piece extruded aluminum
- UHMW sacrificial fence face
- Mini tracks for 1/4 in x 20 bolts
- Made for Delta Uni-fence system
This is the most direct match for the Delta Uni-fence system in this group. It adds tracks for featherboards, stop blocks and jigs while keeping the original Delta Uni-fence base outside the package.
Pros
- Designed for Delta Uni-fence
- Includes UHMW sacrificial face
- Multiple mini tracks
Cons
- Original Delta Uni-fence base is not included
- Upgrade section only
The Peachtree Uni Style Table Saw Fence is the closest direct upgrade for the Delta Uni-fence system in this group. It is a single-piece extruded aluminum fence section with an included UHMW sacrificial fence face.
The front recess accepts a 1/2 in UHMW strip or another 1/2 in thick sacrificial material. You can cut into that face for rabbet work without cutting into the main aluminum section.
Several mini tracks run along the fence and accept 1/4 in x 20 hex head bolts. That gives you places to mount featherboards, stop blocks and other compatible jigs or fixtures.
The package is the Uni Style fence section only. The original Delta Uni Saw fence and base are not included, so this pick makes sense only when you already have the matching Delta Uni-fence system.
Fulton Woodworking Tools Precision Table Saw Miter Gauge: Best for zero-play miter work
- Zero-play 3/4 in miter bar
- Built-in aluminum fence
- 13 positive stops
- UHMW base pad
The Fulton is a focused miter gauge choice for Delta owners who want a tight 3/4 in slot fit and a built-in fence. It handles angled and crosscut work, not rip-fence replacement.
Pros
- Zero-play miter bar
- 13 positive stops
- Includes aluminum fence
Cons
- Miter gauge rather than rip fence
- Exact slot width and depth still need checking
The Fulton Precision Table Saw Miter Gauge has a zero-play 3/4 in miter bar, an aluminum fence and 13 positive stops. The package includes the miter gauge and aluminum miter fence.
It is a focused kit for crosscuts, not a full rip fence system.
Its adjustable protractor head helps set common angles, while the UHMW base pad and steel bar are designed for smooth movement in the table slot. The UHMW pad helps reduce wear on the table surface.
A tight bar fit also helps the fence stay square as you push stock through.
The built-in fence gives the workpiece a support edge without requiring a separate fence build. That ready-to-use setup suits small shops and quick jobs.
It is useful when a Delta saw's rip fence is fine for parallel cuts but the miter setup needs more control.
The 13 positive stops cover the angles most woodworkers use on a regular basis. You can lock in a setting and return to it for matching parts.
For less common angles, you will set the head between stops and lock it in place.
Choose it for a simple miter gauge and fence combination. Check the exact slot fit before ordering, and do not confuse this crosscut tool with a replacement rip fence.
JCFANTS 75 T-Track Table Fence System: Best for short accessory fences
- 15.7 in aluminum fence
- 2.9 in height
- Laser-marked inch scale
- Back track for mounting
This short fence suits a compact miter or crosscut setup where a 15.7 in working length is enough. Its scale and back track also make it useful for accessory-focused bench setups.
Pros
- Compact 15.7 in length
- Laser-marked scale
- Aluminum alloy construction
Cons
- Shorter than the other fence systems
- Compatibility with the existing Delta mounting pattern needs checking
The JCFANTS 75 T-Track Table Fence System is a 15.7 in aluminum alloy fence with a 2.9 in height and a laser-marked inch scale. A back track lets you mount the fence to a compatible miter gauge.
The included parts list centers on the fence itself.
Its compact size suits short crosscut setups, router tables, band saws and other woodworking stations where a 46 in extension would be excessive. A short fence is easier to store and easier to move between machines.
It also leaves more table space for clamps and jigs.
The straight profile also leaves room for compatible jigs and clamps. The laser-marked scale helps you set repeat lengths by eye.
That scale works best when you keep your measuring point consistent from cut to cut.
This fence is not presented as a Delta-specific replacement. Use it only after checking the back-track mounting method against your Delta accessory or miter gauge.
The mounting pattern matters more than the fence length on its own.
Choose it for short workpieces and a small setup footprint. If you need long rip support or a UniFence upgrade, compare it with the dedicated Delta and extension options higher on this page.
How do you choose a fence for a Delta table saw?
Choose the fence by mounting pattern first, then check height, length and accessory clearance. A fence that is long enough but cannot attach squarely to your Delta system will not solve the alignment problem.
A Delta Uni-fence owner should start with the Peachtree Uni Style fence section. It is designed around the Delta Uni-fence system, but the original Delta fence and base are not included.
A Delta UniSaw owner can compare the BOW XT536 because its product details include a special slot for Delta UniSaw and Harvey saws. The BOW model is still a fence extension, so you must account for the compatible clamps and any feed supports required.
For other Delta models, measure the existing fence and table before choosing a universal extension. Record the fence height, the usable length, the distance from the mounting area to the blade and the available clearance at both ends.
Our guide to the best table saw fence extension covers the same length and support questions from a wider angle. If you're comparing brand-specific parts, also see the DeWalt table saw fence guide for another example of why model matching matters.
Is a fence extension better than a replacement Delta fence?
A fence extension is better when your original Delta fence is square and functional but needs more support or accessory tracks. A replacement section is better when the old fence face lacks mounting space or no longer suits your cutting work.
The BOW XTENDER models add a 5 in face and T-slots. The 46 in model gives more reach, while the 36 in XT536 takes less room and includes a Delta UniSaw slot.
The Woodpeckers Auxiliary Rip Fence is aimed at smaller machines and adds two 7 in supports. It needs an existing fence under 3-1/4 in tall and standard track clamps.
The Peachtree fence is more specific. It upgrades the Delta Uni-fence section and includes a UHMW sacrificial face, but it does not include the original Delta Uni-fence base.
Think about the cut, not only the fence length. Long boards need support before and after the blade, while short crosscuts may benefit more from a miter gauge and flip stop.
When should you use a miter gauge instead of a rip fence?
Use a miter gauge for crosscuts and angled cuts, while a rip fence guides stock parallel to the blade. The POWERTEC 71391, Triden extension and Fulton gauge all help with miter work, but none is a general replacement for a rip fence.
The POWERTEC 71391 offers 27 angle stops with 1-degree spacing and includes a 24 in multi-track fence and flip stop. The Triden also has 27 locking stops, with a telescoping fence that extends from 16 in to 24 in.
The Fulton uses a zero-play 3/4 in miter bar and 13 positive stops. Its built-in aluminum fence keeps the setup compact for angled and crosscut operations.
For a broader explanation of tool roles, read How Does a Miter Saw Differ from a Table Saw? and What Is the Difference Between a Circular Saw and a Table Saw?.
A miter gauge should slide without unwanted side movement, and the fence should stay square while you cut. Confirm the slot size before buying because a 5/8 in slot will not accept a product made for a standard 3/4 in x 3/8 in slot.
What accessories help a Delta table saw fence work better?
Featherboards, stop blocks and compatible T-track hardware can make a fence setup easier to control. They should be added only after the fence is aligned and the accessory does not interfere with the blade, guard or workpiece path.
The POWERTEC Universal Tandem Featherboards include T-bolts and miter slot brackets for several mounting arrangements. Their reversible profile and miter lock system support T-slots and standard miter slots.
A fence with several tracks gives you more mounting choices. The BOW XTENDER models have three T-slots, while the Peachtree Uni Style fence has mini tracks for 1/4 in x 20 hex head bolts.
A flip stop helps with repeated crosscuts. Both the POWERTEC 71391 and Triden system include one, but they are miter gauge systems rather than rip-fence replacements.
You can also use best band saw jigs for ideas about support and repeatable workholding. For crosscut setup comparisons, see the best miter gauge for Craftsman table saw, then confirm that the slot and mounting pattern match your Delta saw.
How we compared these Delta table saw fence options
We compared mounting methods, fence sizes, slot requirements, accessory tracks and included parts against the needs of Delta table saw owners. Our score weighs specs, features and buyer feedback against the need for a compatible, accurate setup.
The highest scores include both direct fence solutions and miter accessories because owners solve different problems. A UniFence owner needs a system-specific upgrade, while another may need a taller extension or more controlled crosscuts.
A compact saw may need infeed and outfeed support instead.
We also looked at what is included in each package. Some options are fence-only and need clamps or feed supports.
Others include a gauge, a fence and a stop as one set, which affects total cost and setup work.
Slot size came up again and again in the comparison. Several miter systems need a standard 3/4 in x 3/8 in slot.
A 5/8 in slot will not accept them, so measuring the slot prevents a return.
Fence height and length also shaped the scores. A 5 in face helps tall stock, and a 46 in face helps long boards.
A 15.7 in face suits short crosscuts and small stations.
The most important distinction is what each product is. The Peachtree model is a Delta Uni-fence upgrade section, the BOW models are fence extensions, and the POWERTEC, Triden and Fulton products are miter gauge systems.
Which Delta table saw fence should you choose?
Pick the Peachtree Uni Style Table Saw Fence if you already have a Delta Uni-fence and want a compatible upgrade section with a sacrificial face and tracks for fixtures.
Pick the BOW XT536 if you have a Delta UniSaw-style setup and need a 36 in extension with a 5 in face. Choose the 46 in BOW XTENDER when longer support matters more than compact storage.
Choose the Woodpeckers Auxiliary Rip Fence for a smaller saw with a fence under 3-1/4 in tall. For angled cuts, choose the POWERTEC 71391, Triden or Fulton based on slot size, angle stops and fence length.
The best Delta table saw fence is the one that matches your saw's mounting pattern before it adds features. Measure first, then compare the correct fence family, working height and clearance around the blade.
Our top 3 picks at a glance
-
1
Best for precise angled crosscutsPOWERTEC 71391 Table Saw Precision Miter Gauge
9.7/10 our score
See it on Amazon -
2
Best for feed controlPOWERTEC Universal Tandem Featherboards for Table Saw
9.7/10 our score
See it on Amazon -
3
Best for long fence extensionsBOW Products XT XTENDER T-Track Table Saw
9.4/10 our score
See it on Amazon
Frequently asked questions
What is the best Delta table saw fence?
The Peachtree Uni Style Table Saw Fence is the closest match for a Delta Uni-fence system because it is designed as an upgrade fence section for that system. For a broader fence extension, compare the BOW XT536 or 46 in XT XTENDER with your existing fence and mounting space.
Will any replacement fence fit a Delta table saw?
No. Delta saws use different fence systems, table sizes and mounting layouts.
Check whether your saw has a Delta Uni-fence, a standard miter slot or an existing fence that accepts clamps, then compare the replacement fence length, height and attachment method.
Is a miter gauge the same as a table saw fence?
No. A rip fence guides stock parallel to the blade, while a miter gauge guides crosscuts and angled cuts through a miter slot.
A miter gauge may include a fence, but it does not replace the rip fence used for ripping boards.
What should I measure before buying a Delta table saw fence?
Measure the existing fence height, usable table length, distance around the blade, mounting points and available clearance. Also identify the saw family, such as Delta UniFence or UniSaw, and check whether the replacement is a complete fence or only an extension section.
Can a fence extension improve Delta table saw cuts?
A fence extension can add a taller or longer support face and may accept featherboards, stops or other accessories. It does not correct a misaligned saw or replace safe setup.
Square the existing fence first, then position the extension without blocking the blade or controls.
About this guide: Our look at Delta table saw fences draws on maker specs, materials and what owners report. See how we research.



