Best picks

9 Best Fences for Craftsman Table Saws (November 2026)

Updated on · By the Blade & Bench team

The best table saw fences for Craftsman table saws include the POWERTEC Universal Tandem Featherboards for Table Saw for feed control, the GOINGMAKE Compact Table Saw Miter Gauge for repeat angle cuts, and the BOW Products XT XTENDER T-Track Table Saw for tall workpieces.

On this page (7 sections)
  1. The best table saw fence for Craftsman setups
  2. How do you match a replacement fence to a Craftsman table saw?
  3. Should you choose a replacement fence or an extension?
  4. What accessories improve fence control?
  5. How should you set up a Craftsman table saw fence?
  6. Can you use a table saw fence for circular saw work?
  7. Verdict: which Craftsman table saw fence should you choose?

The best table saw fence for Craftsman setups is a correctly measured replacement or extension that matches the saw’s table and mounting system. For most upgrades, the BOW XTENDER 46 in offers the strongest mix of height, length and accessory tracks, while the shorter XT524 suits compact saws.

A Craftsman table saw fence must stay parallel to the blade and lock firmly at the chosen measurement. Because Craftsman sold saws with different table sizes and mounting layouts, measure your saw before choosing a replacement.

If you need help with related accessories, see our guide to the best table saw jigs for repeatable cuts and safer workpiece control.

Our picks at a glance

  1. 1 POWERTEC Universal Tandem Featherboards for Table Saw
  2. 2 GOINGMAKE Compact Table Saw Miter Gauge
    Best for repeat angle cuts

    GOINGMAKE Compact Table Saw Miter Gauge

    9.5/10 our score

    See it on Amazon
  3. 3 BOW Products XT XTENDER T-Track Table Saw
    Best for tall workpieces

    BOW Products XT XTENDER T-Track Table Saw

    9.4/10 our score

    See it on Amazon
  1. 4Rockler Table Saw Crosscut Sled with TelescopingCheck it
  2. 5POWERTEC BS900RF Rip Fence for POWERTEC BS900

    POWERTEC BS900RF Rip Fence for POWERTEC BS900

    Best for compact band saw tables
    Check it
  3. 6Peachtree Woodworking Supply Uni Style Table Saw

    Peachtree Woodworking Supply Uni Style Table Saw

    Best for Delta Uni-Fence upgrades
    Check it
  4. 7Generic Precision Miter Gauge for Table SawCheck it
  5. 8JCFANTS 75 Table Saw Fence for Woodworking

    JCFANTS 75 Table Saw Fence for Woodworking

    Best for compact accessory setups
    Check it
  6. 9BOW Products XT XTENDER XT524 Table SawCheck it

The best table saw fence for Craftsman setups

The best choice depends on whether you need a complete fence, a taller face, or an accessory for crosscuts. The products below are ordered by score, with fence extensions and cutting guides separated from direct replacement candidates.

Our score weighs specs, features and buyer feedback against what you're shopping for. We checked the stated dimensions, mounting methods and intended uses, but we did not test these products on Craftsman saws.

ProductBest forPackMaterialMountingOur score
POWERTEC Universal Tandem Featherboards for Table Sawfeed control2 featherboardsPlastic and metalT-slots and miter slots9.7
GOINGMAKE Compact Table Saw Miter Gaugerepeat angle cutsAluminum alloy9.5
BOW Products XT XTENDER T-Track Table Sawtall workpieces9.4
Rockler Table Saw Crosscut Sled with Telescopingclean crosscuts9.2
POWERTEC BS900RF Rip Fence for POWERTEC BS900compact band saw tablesClamps directly to the table9.0
Peachtree Woodworking Supply Uni Style Table SawDelta Uni-Fence upgradesAluminum8.7
Generic Precision Miter Gauge for Table Sawwide angle work8.5
JCFANTS 75 Table Saw Fence for Woodworkingcompact accessory setups8.1
BOW Products XT XTENDER XT524 Table Sawsmaller sawsTwo XT2 clamps sold separately7.9
1

POWERTEC Universal Tandem Featherboards for Table Saw: Best for feed control

POWERTEC Universal Tandem Featherboards for Table Saw, table saw fences for Craftsman table saws
9.7/10Our score
  • 2 featherboards
  • Miter slot brackets
  • T-bolts and threaded knobs
  • T-slot and miter-slot compatibility

These featherboards help hold stock against a fence while you set up accurate cuts. The included mounting hardware supports horizontal, vertical and stackable arrangements.

See it on Amazon

Pros

  • Two-piece set
  • Flexible mounting hardware
  • Works with table saws, band saws and router tables

Cons

  • Not a replacement fence
  • Requires a compatible slot or track

The POWERTEC Universal Tandem Featherboards are the top pick for feed control around a Craftsman fence. This is not a replacement fence, but its two featherboards can press stock toward the fence and table while you make rip cuts.

The set includes threaded 5-star knobs, T-bolts and miter slot brackets. Those parts support horizontal mounting in a miter slot, vertical mounting in 3 in multi-tracks and stackable setups with the included spacers.

The reversible profile works with T-slots and miter slots on table saws, band saws and router tables. The plastic and metal construction keeps the set hand-powered and adjustable rather than adding a separate power requirement.

Choose this set when your existing Craftsman fence is straight and secure but your stock needs steadier feed control. It won't correct a fence that fails to lock parallel to the blade.

POWERTEC Universal Tandem Featherboards for Table SawCheck it on Amazon
2

GOINGMAKE Compact Table Saw Miter Gauge: Best for repeat angle cuts

GOINGMAKE Compact Table Saw Miter Gauge, table saw fences for Craftsman table saws
9.5/10Our score
  • 360mm fence
  • 11 positive angle stops
  • Flip stop
  • 3/4 x 3/8 in T-slot and U-slot fit

This compact miter gauge helps with crosscuts and angled cuts when your Craftsman setup needs more than a rip fence. Its flip stop supports repeat lengths.

See it on Amazon

Pros

  • 11 positive stops
  • Compact size
  • Adjustable miter bar

Cons

  • Miter gauge, not a rip fence
  • Slot dimensions must match

The GOINGMAKE Compact Table Saw Miter Gauge is best for repeat crosscuts and angle cuts. Its 360mm aluminum alloy fence suits compact portable saws and fits 3/4 x 3/8 in T-slots and U-slots.

It has 11 positive angle stops, including 90, 60, 45, 30, 22.5, 15 and 0 degrees in positive and negative directions. The clear laser scales also allow settings from -60 to 60 degrees.

A flip stop helps repeat cut lengths, while adjusters at the front, end and middle of the miter bar help tune the fit. Measure your Craftsman slot before choosing it because a miter gauge does not use the same mounting points as a rip fence.

GOINGMAKE Compact Table Saw Miter GaugeCheck it on Amazon
3

BOW Products XT XTENDER T-Track Table Saw: Best for tall workpieces

BOW Products XT XTENDER T-Track Table Saw, table saw fences for Craftsman table saws
9.4/10Our score
  • 46 in fence
  • 5 in tall face
  • Three T-slots
  • Aluminum extrusion

The 46 in XTENDER adds a taller working face to an existing fence. It suits Craftsman owners who need better guidance for tall boards and accessory mounting.

See it on Amazon

Pros

  • Long working surface
  • Three accessory tracks
  • Adjustable positioning

Cons

  • Fence only
  • BOW T-Track clamps sold separately

The BOW Products XT XTENDER 46 in is the strongest choice for a taller, longer Craftsman fence face. It adds a 5 in tall face and three T-slots for compatible featherboards, stops and feed accessories.

The aluminum extrusion has a 4 in flat face and rear slots for forward, centered or rear positioning. That lets you set the extension for infeed, center-table or outfeed support when the mounting arrangement works with your existing fence.

The XTENDER clamps to existing fences with BOW T-Track clamps, sold separately. Treat it as an extension system, not a complete replacement, and confirm the clamp position and available table length first.

BOW Products XT XTENDER T-Track Table SawCheck it on Amazon
4

Rockler Table Saw Crosscut Sled with Telescoping: Best for clean crosscuts

Rockler Table Saw Crosscut Sled with Telescoping, table saw fences for Craftsman table saws
9.2/10Our score
  • 1/2 in phenolic base
  • 25 to 38-1/4 in telescoping fence
  • Flip stop
  • Hold-down clamp

This crosscut sled is for repeatable 90-degree cuts and 45-degree miters, not for replacing a Craftsman rip fence. Its telescoping fence supports longer stock.

See it on Amazon

Pros

  • Repeatable crosscuts
  • Adjustable miter bar
  • Replaceable zero-clearance insert

Cons

  • Large accessory
  • Does not replace a rip fence

The Rockler Table Saw Crosscut Sled is best for repeatable crosscuts and 45-degree miters, not for replacing a Craftsman rip fence. Its 1/2 in phenolic base runs in standard miter slots and resists swelling and warping.

The telescoping aluminum fence extends from 25 to 38-1/4 in. A micro-adjust flip stop controls repeat lengths, while the adjustable miter bar helps reduce side-to-side play.

The box includes the sled base and fence, miter bar, flip stop, Bit-Saver hold-down clamp, extension work support, jig handle, replacement zero-clearance insert and hardware pack. Choose it when crosscut accuracy matters more than parallel ripping.

Rockler Table Saw Crosscut Sled with TelescopingCheck it on Amazon
5

POWERTEC BS900RF Rip Fence for POWERTEC BS900: Best for compact band saw tables

POWERTEC BS900RF Rip Fence for POWERTEC BS900, table saw fences for Craftsman table saws
9.0/10Our score
  • Direct-clamp design
  • 11-1/8 to 11-13/16 in table fit
  • Cam lever
  • Aluminum fence

This is a band saw rip fence that can fit some 9 in saw tables, including certain Craftsman designs. Confirm your table dimensions before treating it as a Craftsman table saw fence.

See it on Amazon

Pros

  • No rails required
  • Adjustable clamp range
  • Fits several 9 in band saw designs

Cons

  • Designed for band saws
  • Craftsman compatibility must be checked

The POWERTEC BS900RF is best for compact band saw tables, and it should not be treated as a universal Craftsman table saw fence. It fits the POWERTEC BS900 and work tables from 11-1/8 to 11-13/16 in.

Its direct-clamp design needs no rails, and the cam lever locks the fence in place. The stated compatibility includes several 9 in band saw brands, including Craftsman, but that does not confirm fit on a Craftsman table saw.

Use the table dimensions as the first check. If your saw is a compatible band saw, the adjustable clamp range and square aluminum fence can support straight parallel cuts.

POWERTEC BS900RF Rip Fence for POWERTEC BS900Check it on Amazon
6

Peachtree Woodworking Supply Uni Style Table Saw: Best for Delta Uni-Fence upgrades

Peachtree Woodworking Supply Uni Style Table Saw, table saw fences for Craftsman table saws
8.7/10Our score
  • 43 in aluminum fence
  • UHMW sacrificial face
  • Mini tracks
  • Fits 1/4-20 hex head bolts

This fence section is built as an upgrade for the Delta Uni-Fence system. It can guide a compatible saw setup, but it is not a universal Craftsman replacement.

See it on Amazon

Pros

  • Sacrificial face included
  • Multiple accessory tracks
  • Solid extruded aluminum

Cons

  • Delta Uni-Fence base not included
  • Not a direct Craftsman fit

The Peachtree Uni Style Table Saw Fence is best for Delta Uni-Fence upgrades, not direct Craftsman replacements. It is a 43 in extruded aluminum fence section with an included UHMW sacrificial fence face.

The recessed front accepts a 1/2 in face, which can be cut into for rabbet work. Mini tracks along the fence accept 1/4-20 hex head bolts for compatible featherboards, stop blocks and fixtures.

The original Delta Uni-Saw fence and base are not included. If you own a Craftsman saw, consider this only when your existing system can accept the section and you have verified the mounting details.

For comparison with another brand-specific setup, see our guide to the best delta table saw fence.

Peachtree Woodworking Supply Uni Style Table SawCheck it on Amazon
7

Generic Precision Miter Gauge for Table Saw: Best for wide angle work

Generic Precision Miter Gauge for Table Saw, table saw fences for Craftsman table saws
8.5/10Our score
  • 20 to 160 degree angle range
  • Stop block
  • Miter fence
  • Aluminum alloy and stainless steel

This miter gauge helps with broad-angle crosscuts and repeat lengths. Check the Craftsman slot dimensions carefully because the stated fit is specific.

See it on Amazon

Pros

  • Wide angle range
  • Built-in stop block
  • Rust-resistant materials

Cons

  • Not a rip fence
  • Requires exact slot measurements

The Generic Precision Miter Gauge is best for wide-angle crosscuts and repeat lengths. It adjusts from 20 to 160 degrees and includes a stop block and miter fence.

Its fit is specific: the T-slot needs a 19mm top opening, 30mm bottom width and 13mm total depth, with an inner bottom wall of at least 23mm. Measure your Craftsman slot instead of assuming a standard fit.

The 250 x 300mm gauge uses aluminum alloy and stainless steel. It can also work on band saws, jointers and router tables when the slot matches, but it remains a crosscut guide rather than a rip fence.

Generic Precision Miter Gauge for Table SawCheck it on Amazon
8

JCFANTS 75 Table Saw Fence for Woodworking: Best for compact accessory setups

JCFANTS 75 Table Saw Fence for Woodworking, table saw fences for Craftsman table saws
8.1/10Our score
  • 400mm fence
  • 75mm height
  • Laser-engraved inch scale
  • Aluminum construction

This compact aluminum fence has a track for compatible jigs and fixtures. Its short length suits small setups, but you must confirm how it mounts to your Craftsman saw.

See it on Amazon

Pros

  • Compact dimensions
  • Accessory track
  • Laser-engraved scale

Cons

  • Fence only
  • Mounting details need careful checking

The JCFANTS 75 Table Saw Fence is best for compact accessory setups where a short aluminum fence is enough. It measures 400mm long and 75mm high, with a laser-engraved inch scale.

A rear track accepts compatible fasteners for jigs, fixtures and other woodworking setups. The aluminum alloy construction is aimed at table saw, band saw, router table and drill press use.

This is a fence-only item, so confirm how it will attach to your Craftsman saw. Its compact size may suit a small table, but it won't provide the same reach as the 46 in BOW XTENDER.

JCFANTS 75 Table Saw Fence for WoodworkingCheck it on Amazon
9

BOW Products XT XTENDER XT524 Table Saw: Best for smaller saws

BOW Products XT XTENDER XT524 Table Saw, table saw fences for Craftsman table saws
7.9/10Our score
  • 24 in fence
  • 5 in tall extrusion
  • Three T-slots
  • Forward, centered or rear positioning

The 24 in XT524 adds height and accessory tracks to a compatible existing fence. It is easier to place on a compact saw than a longer extension, but the clamps are separate.

See it on Amazon

Pros

  • Compact length
  • Three accessory tracks
  • Flexible positioning

Cons

  • Fence only
  • Requires compatible XT2 clamps

The BOW Products XT524 is best for smaller Craftsman saws that need a taller fence face. Its 24 in aluminum extrusion is 5 in tall, with a 4 in flat face and three T-slots.

Rear slots allow forward, centered or rear placement when paired with two XT2 clamps, sold separately. The bottom slot accepts XT1 Feed Supports, also sold separately.

Choose the XT524 when a 46 in extension would be too long for your table. It still requires a compatible existing fence and clamp arrangement, so check the mounting area before ordering.

BOW Products XT XTENDER XT524 Table SawCheck it on Amazon

How do you match a replacement fence to a Craftsman table saw?

Match the fence to the table dimensions, rail spacing and locking method before comparing materials or accessory tracks. A fence that looks long enough can still fail if its clamps do not reach the saw’s mounting points.

Measure these areas:

  • Table width and depth.
  • Distance between front and rear rails or mounting points.
  • Existing fence height and length.
  • Distance from the front rail to the blade.
  • Available T-slots, U-slots or miter slots.
  • Clearance around the motor, guard and blade adjustment controls.

A replacement fence should lock without forcing the table or rail out of alignment. After installation, check that the fence stays parallel to the blade through its full travel.

For another brand-specific comparison, our guide to the dewalt table saw fence explains why model and rail measurements matter.

Should you choose a replacement fence or an extension?

Choose a replacement fence when the original fence will not lock securely, and choose an extension when the existing fence works but needs more height, length or accessory tracks. An extension cannot correct a bent rail or a fence that shifts during a cut.

The BOW XTENDER 46 in gives the most reach here, while the XT524 is easier to consider for a smaller saw. Both are fence-only systems and need compatible attachment hardware.

A replacement fence may give you a cleaner fit, but the correct option depends on the Craftsman model. If you cannot identify the rail pattern, measure it before choosing a universal-looking product.

Read our guide to the best table saw fence extension for more ways to add support without replacing the whole setup.

What accessories improve fence control?

Featherboards, stops and crosscut guides can improve control when they match the fence and table slots. They do not replace safe blade setup or a fence that locks parallel.

The POWERTEC two-pack adds adjustable pressure against the workpiece. The BOW systems add T-slots for compatible accessories, and the Rockler sled provides a separate path for repeat crosscuts.

For router-table work, see the best featherboard for router table guide. A featherboard that fits a router table is not automatically suited to a Craftsman table saw, so check the mounting slot and hardware.

If your project needs a different cutting motion, compare how a miter saw differs from a table saw before changing accessories. A miter saw uses a different workholding approach from a table saw rip fence.

How should you set up a Craftsman table saw fence?

Set the fence parallel to the blade, lock it firmly and confirm the measurement at both the front and rear of the workpiece path. Make adjustments with the saw disconnected from power, then make a controlled check cut with suitable protection.

Keep the fence face clean so stock can slide without catching. If you add a featherboard or stop, make sure it holds the workpiece without pushing it into the blade path.

For crosscuts, use a suitable miter gauge or sled rather than relying on a rip fence alone. Our guide to the best band saw jigs also covers why a jig must match the tool's slot and cutting direction.

Can you use a table saw fence for circular saw work?

No. A table saw fence guides stock across a fixed blade, while a circular saw moves across the workpiece.

The fence style, mounting method and safety setup are different.

Read what the difference is between a circular saw and a table saw before adapting a guide between tools. Do not assume a Craftsman table saw fence will transfer to a handheld saw.

Verdict: which Craftsman table saw fence should you choose?

The BOW Products XT XTENDER 46 in is the best overall choice when your existing Craftsman fence is usable and you need a taller, longer face with accessory tracks. Choose the BOW XT524 for a smaller setup, or the POWERTEC featherboards when feed control is the main problem.

Pick the GOINGMAKE or Generic gauge for repeat crosscuts and angles, not ripping. Choose the Rockler sled when clean repeatable crosscuts matter more than fence replacement, and verify every mounting measurement before ordering a replacement system.

Our top 3 picks at a glance

  1. 1 POWERTEC Universal Tandem Featherboards for Table Saw
  2. 2 GOINGMAKE Compact Table Saw Miter Gauge
    Best for repeat angle cuts

    GOINGMAKE Compact Table Saw Miter Gauge

    9.5/10 our score

    See it on Amazon
  3. 3 BOW Products XT XTENDER T-Track Table Saw
    Best for tall workpieces

    BOW Products XT XTENDER T-Track Table Saw

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What is the best table saw fence for Craftsman saws?

The best table saw fence for Craftsman saws is the one that matches your table dimensions, mounting points and fence rail design. Measure the table and existing fence before choosing a replacement.

An extension such as the BOW XTENDER may help when the current fence works but needs a taller or longer face.

Will any replacement fence fit a Craftsman table saw?

No. Craftsman table saws use different table sizes and mounting layouts, so a fence that fits one model may not fit another.

Check the rail spacing, table depth, slot locations and clamp area before buying.

A fence described for a band saw or another brand is not automatically compatible.

Can I use a fence extension instead of replacing my Craftsman fence?

Yes, if your existing fence is straight, locks securely and can accept the extension's clamps. The BOW XTENDER systems add a taller face and T-slots, but the required clamps may be sold separately.

An extension changes the working surface without being a complete replacement fence.

What should I measure before buying a Craftsman table saw fence?

Measure the table width and depth, the distance between mounting points, the rail position and the fence height you need. Also check whether the saw uses a T-slot, U-slot, clamp or rail system.

Compare those measurements with the exact fence requirements before ordering.

Are miter gauges the same as table saw fences?

No. A rip fence guides stock parallel to the blade, while a miter gauge guides crosscuts and angled cuts through the blade.

Products such as the GOINGMAKE and Generic Precision Miter Gauge can improve crosscut accuracy, but they do not replace a Craftsman rip fence.