9 Best Reciprocating Saw Blades for Metal (November 2026)
The best reciprocating saw blades for metal include the EZARC Carbide Reciprocating Saw Blades for tough thick metal, the TOLESA Bi-Metal Reciprocating Saw Blades for thick sheet and pipe, and the Milwaukee 12 Piece Multi Material for mixed demolition.
On this page (5 sections)
The best reciprocating saw blades for metal are the EZARC carbide blades for tough, thick stock, while the WORKPRO set gives the most flexibility for home projects.
Choose carbide for difficult alloys and bi-metal for common sheet metal, pipe and profiles.
Blade choice comes down to three things: metal thickness, tooth count and blade material.
This guide compares the best reciprocating saw blades for metal-focused work, mixed demolition and general home cutting.
We checked stated materials, tooth counts, lengths, cutting ranges and included storage.
Thickness should be your first filter because it shows whether a blade will work steadily or be pushed beyond its intended range.
Tooth count then shapes control and finish. Higher TPI patterns generally give a finer bite for thinner metal, while lower TPI patterns clear material faster and suit thicker stock.
Length matters for access and handling as much as for cutting depth. A 9 in blade helps with larger profiles but needs clear space, while a 4 in or 6 in blade is easier to guide in tight spots.
Storage also matters, since loose blades are hard to sort and easy to damage in a toolbox.
Check the shank against your tool before cutting and inspect the blade for bends or missing teeth.
Secure the work and use steady pressure rather than forcing the blade forward, because excess pressure raises heat and can push a thin blade off line.
After cutting, let the blade cool and store it dry, keeping metal blades apart from wood blades.
The picks below separate specialized metal blades from mixed sets, so you can match the kit to the share of metal in your work.
Our picks at a glance
-
1
-
2
Best for thick sheet and pipeTOLESA Bi-Metal Reciprocating Saw Blades
9.1/10 our score
See it on Amazon -
3
- 4
Check itDEWALT Reciprocating Saw Blade Set for Metal
Best for a broad metal and wood kit - 5
Check itDEWALT Reciprocating Saw Blade Set for Metal
Best for compact mixed cutting - 6
Check itCaliastro 6-Inch Thick Metal Cutting Reciprocating Saw
Best for repeated 18 TPI cuts - 7
Check itWORKPRO 32-Piece Reciprocating Saw Blade Set
Best for home project variety - 8
Check itSEDY 36-Piece Ultimate Reciprocating Saw Blade Set
Best for a large general kit - 9
Check itHORUSDY 40-Piece Reciprocating Saw Blade Set
Best for the widest TPI range
Which reciprocating saw blades for metal are the best picks?
The strongest metal-focused choices are EZARC for tough material, TOLESA for medium to thick stock and Caliastro for repeated 18 TPI cuts.
Mixed sets make more sense when metal is only one part of your work.
Our score weighs specs, features and buyer feedback against the needs of someone shopping for reciprocating saw blades for metal.
A metal-only pack suits a bench where the same stock appears again and again.
A mixed pack suits a home toolbox where wood, plastic and metal may turn up in the same week.
Tooth count is the clearest way to separate those groups, since finer patterns suit thinner stock and coarser patterns suit thicker stock.
Blade length then decides how easily you can reach the cut and how much room you need around the work.
We treated a stated cutting range as more useful than a broad claim about versatility.
That approach keeps the choice tied to material thickness, which is the limit a blade meets first.
The result is a short list that favors clear matches over the largest possible assortment.
| Product | Best for | Material | Length | Tooth count | Our score |
|---|---|---|---|---|---|
| EZARC Carbide Reciprocating Saw Blades | tough thick metal | Carbide | 6 in | 8 TPI | 9.3 |
| TOLESA Bi-Metal Reciprocating Saw Blades | thick sheet and pipe | Bi-metal with 8% cobalt | 9.1 | ||
| Milwaukee 12 Piece Multi Material | mixed demolition | 9.2 | |||
| DEWALT Reciprocating Saw Blade Set for Metal | a broad metal and wood kit | Matrix II steel with 8% cobalt | 9.4 | ||
| DEWALT Reciprocating Saw Blade Set for Metal | compact mixed cutting | Bi-metal | 9.6 | ||
| Caliastro 6-Inch Thick Metal Cutting Reciprocating Saw | repeated 18 TPI cuts | Bi-metal with HSS teeth and HCS body | 8.2 | ||
| WORKPRO 32-Piece Reciprocating Saw Blade Set | home project variety | 9.7 | |||
| SEDY 36-Piece Ultimate Reciprocating Saw Blade Set | a large general kit | 8.7 | |||
| HORUSDY 40-Piece Reciprocating Saw Blade Set | the widest TPI range | 8.5 |
Best reciprocating saw blades for metal
1. EZARC Carbide Reciprocating Saw Blades: Best for tough thick metal
EZARC Carbide Reciprocating Saw Blades: Best for tough thick metal
- 6 in length
- 8 TPI carbide teeth
- Cuts 1/8 to 1/2 in metal
- 3-pack
Carbide teeth suit difficult metal such as stainless steel, high-alloy steel, hardened steel, rebar and car beams. The 6 in blades use a 1/2 in universal shank.
Pros
- Carbide teeth
- Designed for thick metal
- Fits major saw brands
Cons
- Only 3 blades
- Less useful for thin sheet metal
EZARC is the most specialized option here. Its 6 in carbide blades use 8 TPI teeth and are designed for metal from 1/8 to 1/2 in thick.
The stated applications include stainless steel, high-alloy steel, hardened steel, rebar and car beams. That makes this 3-pack a better fit for difficult stock than a general-purpose metal blade.
Each blade has a 1/2 in universal shank and is identified as compatible with Bosch, Milwaukee, Black & Decker, Hitachi, Makita, Metabo, DEWALT, Porter Cable, Skil and Rockwell saws.
The trade-off is simple: you get only 3 blades, and the 8 TPI pattern is not the first choice for thin sheet metal. If your work is mostly light-gauge sheet, a finer bi-metal blade gives you more control.
For a broader explanation of shanks and blade fit, read how to match a saw blade to the tool and material.
2. TOLESA Bi-Metal Reciprocating Saw Blades: Best for thick sheet and pipe
TOLESA Bi-Metal Reciprocating Saw Blades: Best for thick sheet and pipe
- 9 in length
- 14 TPI
- 8% cobalt edge
- 5-pack
These 9 in blades suit medium to thick sheet metal, pipe and profiles. The 14 TPI set teeth and 0.9 mm thin wall focus on controlled metal cutting.
Pros
- Long 9 in blade
- 14 TPI for metal
- Fits major saw brands
Cons
- Less suited to very thin sheet
- Long blade needs clearance
TOLESA's 9 in blades suit medium to thick sheet metal from 2 to 8 mm.
The 14 TPI tooth pattern is a practical middle ground for pipe, profiles and heavier metal cutting.
The bi-metal construction includes an 8% cobalt edge.
The blades also use set teeth and a 0.9 mm thin wall to help limit heat build-up during cutting.
A 9 in blade reaches farther than the 6 in options, but that extra length needs room to move.
Keep as much of the blade in contact with the work as the cut allows, and support loose stock before cutting.
The 1/2 in universal shank fits saws from Bosch, DEWALT, Milwaukee, SKIL, Makita, Black & Decker, Ryobi, Porter Cable, Hitachi, Flex and Hilti.
This pack suits a user who mostly cuts sheet, pipe and profiles rather than a mixed run of wood and metal.
The 5-pack gives replacements for a longer job, yet it does not cover thin sheet as directly as a finer TPI blade would.
Care is simple, since the blades should be stored flat and checked for bent teeth before each use.
Let the blade cool between demanding cuts and avoid forcing the long blade sideways in a confined space.
That steady approach helps the set teeth work as intended and keeps the cut line easier to follow.
3. Milwaukee 12 Piece Multi Material: Best for mixed demolition
Milwaukee 12 Piece Multi Material: Best for mixed demolition
- 12 blades
- 6 and 9 in lengths
- 18, 14, 8 and 5 TPI
- Storage case
This set gives you 18 TPI blades for metal, plus coarser blades for wood and general demolition. Its thicker blade stock is aimed at durable job-site use.
Pros
- Wide TPI range
- 6 and 9 in blades
- Adjustable storage case
Cons
- Not a metal-only set
- More blades than a single-material job needs
Milwaukee is a good choice when metal cutting shares the toolbox with wood and plastic. The set includes 6 in 18 TPI blades for metal, plus 5, 8 and 14 TPI options for other materials.
The 12 blades include 6 and 9 in lengths. Thicker blade stock is intended for durability, and the double relief angle is designed to reduce tooth stress.
Its case adjusts to hold blades up to 9 in, so the storage matches the set's two blade lengths. The wood blades include a full raker tooth at the tip for easier plunging.
This is not a dedicated metal kit. Choose it when demolition work changes from metal to wood and plastic, not when every cut is in thick steel.
If you're comparing tool types as well, see what is the difference between a jigsaw and a reciprocating saw?.
4. DEWALT Reciprocating Saw Blade Set for Metal: Best for a broad metal and wood kit
DEWALT Reciprocating Saw Blade Set for Metal: Best for a broad metal and wood kit
- 12-piece set
- Bi-metal construction
- Wood, metal and iron blades
- ToughCase storage
The 12-piece set covers metal, iron, wood and demolition work. Its telescoping case expands for 9 in blades and fits DEWALT power tool kit boxes.
Pros
- 12-piece range
- 8% cobalt material
- Expanding storage case
Cons
- Mixed-use set
- May be more than a light metal job requires
The 12-piece DEWALT set covers metal, iron, wood and demolition work.
It uses Matrix II steel with 8% cobalt and includes blades in 6, 8 and 9 in sizes.
The telescoping ToughCase expands to hold 9 in blades and is designed to fit DEWALT power tool kit boxes.
That helps if your blade storage needs to stay with a larger tool case.
DEWALT describes the blade profile as tall and thick for straight cuts in heavy metal work.
The set includes several blade patterns, so sort the case before starting and select by material and tooth count.
This kit offers more range than a small metal-only pack, but some of its contents are for wood.
It suits a general workshop better than a single-purpose metal station.
The assortment is most useful when demolition work moves between metal, iron and timber in the same project.
Sorting the case by material at home will save time on site and reduce the chance of picking a wood blade for metal.
Store the case closed with the blades flat, and check the taller profile for bends before a heavy cut.
That habit keeps a broad kit ready without turning storage into another job to manage.
5. DEWALT Reciprocating Saw Blade Set for Metal: Best for compact mixed cutting
DEWALT Reciprocating Saw Blade Set for Metal: Best for compact mixed cutting
- 6-piece set
- Bi-metal construction
- Metal and wood cutting
- ToughCase container
This compact kit combines metal and wood blades in a portable ToughCase. The tall, thick profile is aimed at straight cuts and durable demolition work.
Pros
- Compact 6-piece kit
- Bi-metal blade design
- Storage case included
Cons
- Fewer blade choices
- Not focused only on metal
This 6-piece DEWALT kit is the compact choice for metal and wood cutting.
Its bi-metal construction is designed to combine flexibility with a long-lasting cutting edge.
The tall, thick blade profile is intended to support straight cuts and durability in heavy metal and demolition work.
A collapsible ToughCase keeps the six blades together.
The smaller set is useful if you want a few common replacements without carrying a large assortment.
It gives you less choice than the 12-piece DEWALT kit, so it works best when your cutting jobs are predictable.
DEWALT identifies the set for DEWALT reciprocating saws and includes DWAR656, DWAR610, DWAR614, DWAR618 and DWAR624 blades.
This compact format suits a small job bag or a drawer where space matters more than range.
It also suits a user who knows the usual materials in advance and does not need many lengths at hand.
The trade-off is fewer options for unusual thickness, so check the blade labels before a new type of stock appears.
Keep the case closed between jobs and let blades cool after cutting metal.
That simple care helps a small kit stay tidy and ready for the next repair.
6. Caliastro 6-Inch Thick Metal Cutting Reciprocating Saw: Best for repeated 18 TPI cuts
Caliastro 6-Inch Thick Metal Cutting Reciprocating Saw: Best for repeated 18 TPI cuts
- 6 in length
- 18 TPI
- Cuts metal up to 1/4 in
- 8-pack
The 6 in, 18 TPI blades suit metal up to 1/4 in, including black pipe, conduit, cold rolled steel, rebar and angle iron. Eight blades give you replacements for repeated work.
Pros
- Fine 18 TPI tooth count
- 8 blades
- Case included
Cons
- Only one length and TPI
- Less suited to fast coarse cuts
Caliastro's 8-pack suits repeated cuts in metal up to one-quarter inch thick.
These 6 in blades use 18 TPI and a 0.05 in thickness for metal such as black pipe, conduit, cold rolled steel, rebar and angle iron.
The bi-metal construction bonds HSS teeth to an HCS body.
Precision-set teeth are intended to produce smooth cuts, while the 8-pack gives you replacements for a longer project.
The fine 18 TPI pattern favors controlled cutting over the fastest removal of thick material.
If you regularly cut metal thicker than one-quarter inch, choose a blade with a stated thicker-metal range instead.
The blades fit major brands including DEWALT, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch and Hitachi.
This is a strong fit for a trade user who repeats the same type of metal cut through a project.
Eight blades matter in that setting, since a dull blade can be swapped without a trip for more stock.
The clear plastic case also helps you see the count at a glance, which is useful when work runs across several days.
Keep the 6 in length in mind for tight access, since it is easier to control than a longer blade in corners.
Support pipe and angle iron firmly so the fine teeth do not chatter or catch on a moving edge.
7. WORKPRO 32-Piece Reciprocating Saw Blade Set: Best for home project variety
WORKPRO 32-Piece Reciprocating Saw Blade Set: Best for home project variety
- 32 pieces
- Metal blades from 14 to 24 TPI
- Wood and pruning blades
- Organizer pouch
This set covers metal, wood, plastic and drywall, with metal blades for 0.7 to 8 mm stock. The pouch keeps the 4 and 6 in metal blades sorted.
Pros
- Wide 32-piece selection
- 14, 18 and 24 TPI metal blades
- Organizer pouch
Cons
- Mixed-purpose set
- Wood blades are not for wood with nails
WORKPRO gives you the broadest practical mix for home repairs. Its bi-metal metal blades cover 0.7 to 8 mm stock, with 4 and 6 in options from 14 to 24 TPI.
The set includes 32 pieces for metal, wood, plastic and drywall, plus a pruning blade for branches up to 180 mm in diameter. The wood blades cover coarse wood and firewood from 20 to 175 mm, but they are not intended for wood with nails.
The metal assortment includes 4 in 24 TPI blades, 6 in 14 TPI blades, and 6 in 18 and 24 TPI blades. The organizer pouch keeps those choices separate from the wood and pruning blades.
Choose WORKPRO if one toolbox needs to handle many materials. For a metal-only job, the product's large mixed assortment means you will need to sort out the blades before cutting.
For a different cutting shape, compare the reciprocating saw knife blade guide.
8. SEDY 36-Piece Ultimate Reciprocating Saw Blade Set: Best for a large general kit
SEDY 36-Piece Ultimate Reciprocating Saw Blade Set: Best for a large general kit
- 36 pieces
- HCS and bi-metal blades
- 4, 6 and 9 in lengths
- Storage pouch
The SEDY set includes separate wood and metal blades, with 14, 18 and 24 TPI metal options. Its 4, 6 and 9 in sizes give a broad range for general projects.
Pros
- 36-piece selection
- Several metal tooth counts
- Storage pouch
Cons
- Mixed wood and metal contents
- More sorting before use
SEDY includes 36 HCS and bi-metal blades for wood and metal.
The metal group includes 4 and 6 in blades in 14, 18 and 24 TPI, giving you several ways to match tooth count to stock.
The set also includes 9 in wood blades.
A storage pouch helps keep the assortment together, but the larger number of blades makes sorting more important before a metal cut.
SEDY describes the set as compatible with all reciprocating saw brands and names DEWALT, Makita, Ridgid, Milwaukee and Porter & Cable among the major brands it works with.
This is a useful value-oriented choice for a mixed toolbox.
It is less focused than EZARC or TOLESA, so choose one of those when your main need is difficult or thick metal.
The mix suits a home user who moves from a metal repair to timber work without wanting a second kit.
Sorting by colour and label before the first cut will make the set much easier to use day to day.
The 4 in metal blades help in tight spaces, while the 6 in options give more reach for profiles and sheet.
Keep the pouch zipped so the fine metal teeth stay clear of the coarser wood blades.
That separation also makes worn blades easier to spot before they are fitted to the saw.
9. HORUSDY 40-Piece Reciprocating Saw Blade Set: Best for the widest TPI range
HORUSDY 40-Piece Reciprocating Saw Blade Set: Best for the widest TPI range
- 40 pieces
- 3 to 24 TPI range
- 4, 6 and 9 in lengths
- Storage pouch
The 40-piece set gives you coarse wood blades and finer metal options in 4, 6 and 9 in lengths. It suits a toolbox that handles wood, metal, PVC, pruning and wet wood.
Pros
- Largest set here
- 3 to 24 TPI range
- Storage pouch
Cons
- Many blades are not for metal
- Exact metal assortment needs sorting
HORUSDY has the largest assortment here, with 40 blades from 3 to 24 TPI.
Its 4, 6 and 9 in lengths cover coarse cutting, finer metal work, PVC, pruning and wet wood.
The set uses high-speed carbon steel, bi-material and steel blades.
The pouch helps organize the collection, but only part of the 40-piece set is intended for metal.
A wide TPI range helps when one saw handles several materials.
Use the finer metal blades for sheet and the coarser patterns for jobs that need faster material removal, while checking the blade label before each cut.
HORUSDY describes the set as compatible with most major reciprocating saw brands.
Pick it for variety rather than for a specialized metal cutting task.
This set suits a large home toolbox where the next job may be timber, PVC or a small metal repair.
The wide range reduces the need to buy small packs for each material, though it asks more sorting at the start.
Keep metal blades in one section of the pouch so fine teeth are not mixed with pruning or wet wood patterns.
Check each blade for rust or bent teeth before use, since a large set can sit unused for longer periods.
That routine keeps the variety useful instead of turning the pouch into a place where good blades hide.
How do you choose a reciprocating saw blade for metal?
Choose the blade by metal thickness first, then use tooth count and material to refine the match. A blade that is too coarse for thin stock can produce a rough, difficult cut, while a blade that is too fine for thick stock can remove material slowly.
What tooth count suits metal cutting?
Higher TPI generally suits thinner metal and smoother cuts. The WORKPRO set reaches 24 TPI, Caliastro uses 18 TPI, and TOLESA uses 14 TPI for thicker sheet, pipe and profiles.
Keep several TPI choices if your work changes often. A mixed set such as Milwaukee, SEDY or HORUSDY gives you more options, but you must identify the metal blades before use.
Is bi-metal or carbide better for metal?
Bi-metal is the flexible choice for common metal cutting, while carbide is aimed at especially difficult materials. EZARC uses carbide teeth for stainless steel, high-alloy steel, hardened steel, rebar and car beams.
Bi-metal blades make more sense for ordinary sheet metal, conduit and pipe. They are also easier to justify when one set must cut wood and metal.
Does blade length matter?
Blade length controls reach and handling.
The 4 and 6 in blades in WORKPRO, SEDY and Caliastro are easier to control in tighter areas, while the 9 in TOLESA blades reach deeper stock and larger profiles.
A longer blade is not automatically better.
Select the shortest blade that reaches through the work, and avoid allowing unused blade length to flex against nearby surfaces.
Read our guide to the best long reciprocating saw blades when reach is the main concern.
Short blades also make starting a cut in sheet metal easier to guide.
They reduce the chance of the tip striking a wall, pipe or floor behind the work.
Long blades earn their place when the stock is deep or the cut sits away from the saw body.
They can clear a large profile in fewer passes, yet they need steady support from both hands.
Think about clearance first, then think about depth, since a blade that cannot move freely will not cut well.
A 6 in blade will suit many repairs where access is limited by studs, cabinets or machinery.
A 9 in blade suits open work where the extra reach avoids repositioning the saw.
Match the length to the space before you match it to the metal, and the choice becomes clearer.
How should you use and care for metal reciprocating saw blades?
Secure the metal, choose the correct TPI, keep the shoe against the work when possible and let the blade do the cutting.
Do not force a fine-tooth blade through stock that exceeds its intended range.
Before cutting, confirm the shank fits your saw and check that the blade is not bent or damaged.
Mark the cut, support loose pipe or sheet, and keep hands away from the cutting path.
Use steady pressure rather than pushing hard.
Excess force can increase bending and heat, especially when a thin blade is cutting thick metal.
After the cut, let the blade cool before handling it.
Store blades in the case or pouch, keep metal and wood blades separated, and replace a blade when its teeth are worn or the blade has bent.
The which reciprocating saw blade to use guide can help when the material changes from metal to wood, plastic or demolition work.
Start each session by checking the blade label, since a mixed set can hide a wood blade where a metal blade should be.
Support both sides of sheet metal near the cut, because a loose offcut can drop and pull the blade out of line.
Keep the shoe flat against the work to reduce vibration and help the blade track straight.
Use the lowest speed that keeps the cut moving, then raise it only when the teeth are clearing chips cleanly.
Pause on long cuts in thick stock so heat does not build up in the teeth.
Avoid twisting the blade sideways to widen a cut, because that stresses the steel and can snap a fine tooth pattern.
When a blade starts to rub, chatter or leave a rough edge, swap it before the quality of the work drops.
Keep blades dry and apart from chains, screws and other hard items so the teeth stay sharp.
Which reciprocating saw blades for metal should you buy?
Buy EZARC for thick, difficult metal and TOLESA for medium to thick sheet, pipe and profiles.
Choose Caliastro for repeated 18 TPI cuts up to one-quarter inch.
For a mixed home toolbox, WORKPRO gives the widest useful metal range in a smaller set.
Milwaukee and DEWALT are stronger choices when demolition includes wood and metal, while SEDY and HORUSDY suit buyers who want many blade sizes and tooth counts.
Start with metal thickness, then pick the lowest practical TPI that keeps the cut controlled.
That rule will narrow the choice faster than choosing by brand alone.
If your work is mostly sheet metal, a finer bi-metal blade will feel calmer and give a cleaner edge.
If your work is mostly pipe, profiles or heavier stock, a 14 TPI or carbide option will match the material better.
If the same project moves across several metals, keep at least two TPI choices in the case.
Check the stated range against your actual stock before you order, since thickness limits differ across the sets here.
Also check length and clearance, because the best blade on paper still needs room to move.
Store the chosen set so metal blades stay separate and easy to find, and replace worn blades promptly.
Our top 3 picks at a glance
-
1
-
2
Best for thick sheet and pipeTOLESA Bi-Metal Reciprocating Saw Blades
9.1/10 our score
See it on Amazon -
3
Frequently asked questions
What are the best reciprocating saw blades for metal?
The best reciprocating saw blades for metal depend on the stock. EZARC carbide blades suit tough thick metal, TOLESA 14 TPI bi-metal blades suit medium to thick sheet and pipe, and Caliastro 18 TPI blades suit metal up to 1/4 in.
Choose a mixed set when you also cut wood or plastic.
Is a higher TPI better for cutting metal?
A higher TPI usually suits thinner metal and smoother, more controlled cuts. Lower TPI blades remove material faster from thicker stock but can cut more aggressively.
For example, the Caliastro blades use 18 TPI, while the TOLESA blades use 14 TPI for medium to thick metal.
Are carbide reciprocating saw blades better than bi-metal blades?
Carbide blades can be the better choice for difficult metal, including stainless steel, high-alloy steel, hardened steel, rebar and car beams. Bi-metal blades are more flexible and often make more sense for common sheet metal, pipe and mixed demolition work.
How thick can reciprocating saw blades cut through metal?
The answer depends on the blade. WORKPRO states a metal range of 0.7 to 8 mm, Caliastro states up to 1/4 in, and EZARC gives a range of 1/8 to 1/2 in.
Match the blade to the actual stock thickness rather than choosing by length alone.
Can any reciprocating saw blade fit any saw?
Many metal blades use a 1/2 in universal shank, but compatibility still depends on the saw and the blade design. EZARC and TOLESA identify major saw brands, while WORKPRO and SEDY describe broad compatibility.
Check your saw manual before starting.
About this guide: Our look at reciprocating saw blades for metal draws on maker specs, materials and what owners report. See how we research.



