Best picks

9 Best Band Saw Blades for Metal Cutting (November 2026)

Updated on · By the Blade & Bench team

The best metal cutting band saw blades include the LENOX Tools Portable Band Saw Blades for common portable cuts, the Bosch BS6412-24M 64-1/2 In. 24 TPI Metal for thin stock, and the Imachinist S933414 M42 93" X 3/4" X for thin tube profiles.

On this page (6 sections)
  1. Which band saw blades cut metal best?
  2. The best band saw blades for cutting metal
  3. How do you choose tooth spacing for metal?
  4. What does bi-metal construction change?
  5. How can you check a blade fits your saw?
  6. Which metal cutting band saw blade should you choose?

The best band saw blades for cutting metal match your saw's blade size and the stock's thickness. Fine teeth help keep enough teeth engaged on thin walls, while variable pitch can suit mixed sections; the picks below cover portable and stationary saw sizes.

If you're choosing among metal cutting band saw blades, start with length, width and thickness from your saw manual. Then choose tooth spacing for the material, and check that the blade construction suits the work you do.

Our picks at a glance

  1. 1 LENOX Tools Portable Band Saw Blades
    Best for common portable cuts

    LENOX Tools Portable Band Saw Blades

    9.7/10 our score

    See it on Amazon
  2. 2 Bosch BS6412-24M 64-1/2 In. 24 TPI Metal
    Best for thin stock

    Bosch BS6412-24M 64-1/2 In. 24 TPI Metal

    9.6/10 our score

    See it on Amazon
  3. 3 Imachinist S933414 M42 93" X 3/4" X
    Best for thin tube profiles

    Imachinist S933414 M42 93" X 3/4" X

    9.5/10 our score

    See it on Amazon
  1. 4FOXBC 64-1/2" x 1/2" x 0.02" x

    FOXBC 64-1/2" x 1/2" x 0.02" x

    Best for fine-pitch 4 x 6 saws
    Check it
  2. 5MK Morse Morse Master Cobalt Bi-Metal Portable BandCheck it
  3. 6POWERTEC 93-1/2 Inch Bi-Metal Bandsaw Blades

    POWERTEC 93-1/2 Inch Bi-Metal Bandsaw Blades

    Best for soft non-ferrous metal
    Check it
  4. 7Imachinist S6412121418 Bi-Metal Band Saw Blades 64-1/2"Check it
  5. 8FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade MetalCheck it
  6. 9Oniguard for Milwaukee 48-39-0609 35-3/8" 8-10 TPICheck it

Which band saw blades cut metal best?

The best band saw blades for metal cutting are the ones that fit the saw and keep a suitable number of teeth in contact with the work. We compared blade dimensions, tooth pitch, construction and stated material use to sort these picks by fit.

ProductBest forLengthWidthTooth pitchOur score
LENOX Tools Portable Band Saw Bladescommon portable cuts44-7/8 in1/2 in14 TPI9.7
Bosch BS6412-24M 64-1/2 In. 24 TPI Metalthin stock64-1/2 in1/2 in24 TPI9.6
Imachinist S933414 M42 93" X 3/4" Xthin tube profiles93 in3/4 in10/14 TPI variable9.5
FOXBC 64-1/2" x 1/2" x 0.02" xfine-pitch 4 x 6 saws64-1/2 in1/2 in24 TPI9.1
MK Morse Morse Master Cobalt Bi-Metal Portable Bandvaried portable work44-7/8 in1/2 in14/18 TPI variable9.0
POWERTEC 93-1/2 Inch Bi-Metal Bandsaw Bladessoft non-ferrous metal93-1/2 in1/2 in14 TPI8.8
Imachinist S6412121418 Bi-Metal Band Saw Blades 64-1/2"thin ferrous profiles64-1/2 in1/2 in14/18 TPI variable8.6
FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade Metalmixed section sizes64-1/2 in1/2 in10/14 TPI variable8.4
Oniguard for Milwaukee 48-39-0609 35-3/8" 8-10 TPIthick portable stock35-3/8 in1/2 in8/10 TPI variable8.1

How we chose these metal cutting band saw blades

We checked the stated dimensions, tooth pitch and construction, then compared those details with the intended material and saw type. Our score weighs specs, features and buyer feedback against what you're shopping for.

We didn't treat broad compatibility language as proof that every model fits every saw.

The best band saw blades for cutting metal

These picks cover fine and variable tooth spacing, portable blade loops and longer stationary saw blades. Confirm the exact blade size required by your machine before choosing a model.

If your saw needs a less common size, see our guide to custom band saw blades.

1

LENOX Tools Portable Band Saw Blades: Best for common portable cuts

LENOX Tools Portable Band Saw Blades, metal cutting band saw blades
9.7/10Our score
  • 44-7/8 in long
  • 1/2 in wide and .020 in thick
  • 14 TPI
  • Bi-metal construction

A 14 TPI bi-metal blade for portable saws that take this size. Lenox describes its teeth as high speed steel and its Tuff Tooth design as reinforcing each tooth.

See it on Amazon

Pros

  • Five blades per pack
  • Shatter resistant design
  • Made for cutting metal

Cons

  • Fixed 14 TPI tooth spacing
  • Requires a saw that takes 44-7/8 in blades

The Lenox is a practical starting point for portable saws that use a 44-7/8 in by 1/2 in blade. Its 14 TPI spacing gives you a middle ground for common metal cuts, while bi-metal construction pairs high speed steel teeth with a backing that can bend.

Lenox describes the blade as shatter resistant and says its Tuff Tooth design reinforces the tooth for longer blade life. The pack contains 5 blades, which can be useful if you keep spares on hand.

The stated use includes most metals and material 3/16 to 3/8 in in diameter. That is a useful reference for round stock, but wall thickness and shape also matter when you decide whether 14 TPI is fine enough.

Choose this if your portable saw takes the exact dimensions and you want fixed pitch. For another portable option with variable pitch, compare it with the best porta band saw blades.

LENOX Tools Portable Band Saw BladesCheck it on Amazon
2

Bosch BS6412-24M 64-1/2 In. 24 TPI Metal: Best for thin stock

Bosch BS6412-24M 64-1/2 In. 24 TPI Metal, metal cutting band saw blades
9.6/10Our score
  • 64-1/2 in long
  • 1/2 in wide
  • 24 TPI
  • Stationary metal cutting blade

The 24 TPI profile suits buyers prioritizing close tooth spacing for thin material. Match its 64-1/2 in length and 1/2 in width to the saw.

See it on Amazon

Pros

  • Fine 24 TPI spacing
  • Designed for metal applications
  • Premium grade steel

Cons

  • Single blade
  • Fixed tooth pitch

Bosch is the fine-pitch pick for a stationary saw requiring a 64-1/2 in by 1/2 in blade. At 24 TPI, its teeth sit closer together than those on the 14 TPI choices, which can help maintain tooth contact on thinner metal sections.

Bosch says the blade is made from premium grade steel and uses tooth geometry optimized for cutting. Its design is for metal applications, and the stated dimensions suit many common stationary saw sizes, though you should still verify your saw's manual.

A finer pitch is not automatically better for every job. On thicker solid stock, a coarser pitch can clear larger chips, so match the blade to the section rather than choosing the highest TPI by default.

Pick this for thin metal and a compatible stationary saw. If you're comparing other tool-specific options, use our guide to match a saw blade to the tool and material.

Bosch BS6412-24M 64-1/2 In. 24 TPI MetalCheck it on Amazon
3

Imachinist S933414 M42 93" X 3/4" X: Best for thin tube profiles

Imachinist S933414 M42 93" X 3/4" X, metal cutting band saw blades
9.5/10Our score
  • 93 in long
  • 3/4 in wide
  • 10/14 TPI variable pitch
  • M42 bi-metal

Its variable 10/14 TPI profile is specified for thin pipe and tube profiles. It fits saws requiring a 93 in by 3/4 in blade.

See it on Amazon

Pros

  • Variable tooth spacing
  • M42 bi-metal construction
  • Intended for soft ferrous metal

Cons

  • Only fits a specific blade size
  • Not a portable saw blade

This Imachinist blade serves saws that require a longer 93 in by 3/4 in loop. Its variable 10/14 TPI profile is specified for thin pipe and tube profiles, and the maker describes it for soft ferrous metal.

The size is a key limitation: a 93 in blade that's 3/4 in wide won't fit a saw built for a common 64-1/2 in loop. Check both length and width, and confirm the tensioning range and blade width limits in your saw manual.

Variable tooth spacing provides a changing pitch along the cut, which can help with sections that don't present a uniform thickness. It doesn't remove the need to feed steadily or support the work securely.

Choose this for compatible stationary saws cutting thin ferrous profiles. For stainless stock, see our separate guide to the best band saw blade for stainless steel.

Imachinist S933414 M42 93" X 3/4" XCheck it on Amazon
4

FOXBC 64-1/2" x 1/2" x 0.02" x: Best for fine-pitch 4 x 6 saws

FOXBC 64-1/2" x 1/2" x 0.02" x, metal cutting band saw blades
9.1/10Our score
  • 64-1/2 in long
  • 1/2 in wide
  • 24 TPI
  • M42 bi-metal

This two-pack provides a 24 TPI option for compatible 64-1/2 in metal cutting saws. FOXBC identifies mild steel, aluminum and other metals among its intended materials.

See it on Amazon

Pros

  • Two blades in the pack
  • M42 bi-metal construction
  • Lists compatibility with several 4 x 6 saws

Cons

  • Fixed 24 TPI spacing
  • Compatibility depends on exact saw requirements

FOXBC's 24 TPI blade is a fine-pitch choice for saws that take a 64-1/2 in by 1/2 in loop. The pack includes 2 blades, and the stated construction is M42 bi-metal with 8% cobalt content.

FOXBC names mild steel, aluminum, angle iron, brass, copper and other materials for this blade. The brand also describes use on tougher steels at slow speed, so follow your saw's speed settings and avoid treating that broad material range as a reason to use one setup for every cut.

A fine fixed pitch can suit thin material, but it may not be the best choice for larger solid sections. Compare the workpiece wall or section thickness with the blade's tooth spacing before you start.

This is a useful option if your 4 x 6 saw uses this size and you want a spare in the pack. For general fit checks, our article on best band saw blade for DeWalt shows why tool compatibility comes first.

FOXBC 64-1/2" x 1/2" x 0.02" xCheck it on Amazon
5

MK Morse Morse Master Cobalt Bi-Metal Portable Band: Best for varied portable work

MK Morse Morse Master Cobalt Bi-Metal Portable Band, metal cutting band saw blades
9.0/10Our score
  • 44-7/8 in long
  • 1/2 in wide
  • 14/18 TPI variable pitch
  • Three blades per box

Variable 14/18 TPI spacing gives portable saw users a pitch suited to a broader range of machinable metal. MK Morse describes the cutting edge as shock resistant.

See it on Amazon

Pros

  • Variable tooth pitch
  • Three blades per box
  • For portable band saws

Cons

  • Requires a 44-7/8 in blade
  • Not as fine a pitch as 24 TPI picks

The MK Morse Master Cobalt blade pairs a 44-7/8 in length with variable 14/18 TPI teeth for portable band saws. The three-blade box gives you spares, and the stated use includes machinable metals such as aluminum, carbon steel and stainless steel.

MK Morse describes the cutting edge as shock resistant and says the variable pitch reduces vibration. Those features point to a blade for varied portable work, especially when you switch between stock sizes and want a pitch range rather than one fixed spacing.

This blade shares its length and width with the Lenox pick, but its 14/18 TPI profile changes the tooth spacing. Before swapping, make sure both blades are permitted for the material and cutting conditions in your saw instructions.

Choose it for a variable-pitch portable blade. For more brand-specific choices, compare our guides to best Milwaukee band saw blades and best Ryobi band saw blade.

MK Morse Morse Master Cobalt Bi-Metal Portable BandCheck it on Amazon
6

POWERTEC 93-1/2 Inch Bi-Metal Bandsaw Blades: Best for soft non-ferrous metal

POWERTEC 93-1/2 Inch Bi-Metal Bandsaw Blades, metal cutting band saw blades
8.8/10Our score
  • 93-1/2 in long
  • 1/2 in wide
  • 14 TPI
  • M42 bi-metal

POWERTEC specifies this blade for soft metals such as aluminum, copper, lead, zinc and tin. Its 14 TPI profile is a fixed pitch for saws that take this length.

See it on Amazon

Pros

  • M42 high speed cobalt steel teeth
  • Raker set tooth arrangement
  • Intended for soft metal

Cons

  • One blade per pack
  • Check saw length and width before buying

POWERTEC offers a 93-1/2 in by 1/2 in blade for stationary saws that use that loop size. Its 14 TPI raker-set teeth are specified for soft metals, including aluminum, copper, lead, zinc and tin.

The blade uses M42 high speed cobalt steel teeth and an alloy steel backing strip. POWERTEC describes the backing as providing fatigue resistance, and the raker set as helping clear chips from the cut.

This is a fixed-pitch choice for buyers who want a blade directed at soft non-ferrous stock. It isn't the pick here for a saw requiring 93 in by 3/4 in blades, so compare the dimensions carefully.

Choose it for a compatible 93-1/2 in saw cutting soft metals. If the cut is angled, our guide explains why saw cutting capacities change at an angle.

POWERTEC 93-1/2 Inch Bi-Metal Bandsaw BladesCheck it on Amazon
7

Imachinist S6412121418 Bi-Metal Band Saw Blades 64-1/2": Best for thin ferrous profiles

Imachinist S6412121418 Bi-Metal Band Saw Blades 64-1/2", metal cutting band saw blades
8.6/10Our score
  • 64-1/2 in long
  • 1/2 in wide
  • 14/18 TPI variable pitch
  • M42 bi-metal

The variable pitch is specified for thin pipe and tube profiles in soft ferrous metal. Imachinist warns against using it on non-ferrous metal such as aluminum.

See it on Amazon

Pros

  • Variable pitch for thin profiles
  • M42 bi-metal construction
  • Fits saws using this blade size

Cons

  • Not intended for aluminum
  • Only fits 64-1/2 in by 1/2 in saws

This Imachinist blade fits saws taking a 64-1/2 in by 1/2 in loop and uses variable 14/18 TPI teeth. The tooth profile is specified for thin pipe and tube in soft ferrous metal, making the intended use narrower than a general metal blade.

Imachinist cautions against cutting non-ferrous metals such as aluminum with this blade. Keep that limit in mind if your shop handles different stock types, since the same saw may need a different blade for a different material.

The M42 bi-metal construction and variable pitch make it a candidate for small profile work where tooth spacing matters. Check the workpiece shape and wall thickness, then make sure the blade is compatible with your saw's speed and feed setup.

Pick it for thin ferrous tube profiles when the dimensions match. If stainless is your main material, compare the tooth pitch and material guidance in our stainless steel band saw blade guide.

Imachinist S6412121418 Bi-Metal Band Saw Blades 64-1/2"Check it on Amazon
8

FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade Metal: Best for mixed section sizes

FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade Metal, metal cutting band saw blades
8.4/10Our score
  • 64-1/2 in long
  • 1/2 in wide
  • 10/14 TPI variable pitch
  • M42 bi-metal

The variable 10/14 TPI profile is aimed at structural shapes and thin materials. FOXBC lists compatible 4 x 6 metal cutting saws and several metals.

See it on Amazon

Pros

  • Variable pitch
  • M42 bi-metal construction
  • Designed for structural shapes and thin materials

Cons

  • Compatibility depends on blade dimensions
  • Brand recommends slow speed for tougher steels

FOXBC's variable 10/14 TPI blade fits saws that require a 64-1/2 in by 1/2 in loop. The maker describes it for structural shapes and thin materials, with M42 bi-metal construction and 8% cobalt content.

FOXBC lists mild steel, aluminum, angle iron, brass, copper and tougher steels among possible materials, while recommending slow speed for tougher steels. The variable pitch offers a middle range between the finer 14/18 and coarser 8/10 choices in this group.

The dimensions are common to several 4 x 6 horizontal metal cutting saws, but model compatibility still depends on the exact machine. Confirm the length, width and thickness your saw accepts.

Choose this for mixed section sizes on a compatible saw. It can be a better fit than a fixed 24 TPI blade when the work includes both thin material and structural shapes.

FOXBC 64-1/2 Inch Bi-Metal Bandsaw Blade MetalCheck it on Amazon
9

Oniguard for Milwaukee 48-39-0609 35-3/8" 8-10 TPI: Best for thick portable stock

Oniguard for Milwaukee 48-39-0609 35-3/8" 8-10 TPI, metal cutting band saw blades
8.1/10Our score
  • 35-3/8 in long
  • 1/2 in wide
  • 8/10 TPI variable pitch
  • Three blades per pack

Its 8/10 TPI profile is the coarsest option here and is specified for solid stock and thicker metal cuts. It fits Milwaukee portable saws that take a 35-3/8 in blade.

See it on Amazon

Pros

  • Variable tooth pitch
  • Three blades per pack
  • Specified for solid stock

Cons

  • Requires a 35-3/8 in blade
  • Coarser spacing is a poor match for very thin walls

Oniguard's portable blade is the coarsest pitch in this roundup, at variable 8/10 TPI. Its 35-3/8 in length is made for compatible Milwaukee portable band saws, and the pack contains 3 blades.

The blade is specified for solid stock and metal, including steel and steel alloys. Coarser tooth spacing is generally a better match for thicker sections than very thin walls, where too few teeth may engage the material at once.

Check the saw's blade length and the workpiece before choosing this option. The manufacturer describes it for aluminum and soft alloys as well as steel, but the right feed and speed still depend on the material and saw.

Pick it for thicker stock when your portable saw takes a 35-3/8 in blade. If your Milwaukee uses the common 44-7/8 in size, see our guide to best Milwaukee band saw blades 44 7/8.

Oniguard for Milwaukee 48-39-0609 35-3/8" 8-10 TPICheck it on Amazon

How do you choose tooth spacing for metal?

Choose tooth spacing by the material's thickness at the cut: thin walls need finer teeth, while thicker sections can use coarser teeth. Keep enough teeth engaged through the cut so the blade doesn't catch on a thin edge or struggle to clear chips from a large section.

Fixed TPI gives the same spacing along the blade. Variable pitch, such as 10/14 or 14/18 TPI, changes tooth spacing and can suit varied sections or profiles.

Use the saw maker's feed and speed guidance for the blade and material. TPI alone doesn't determine cut quality, since blade width, workholding, feed pressure and the material's shape all affect how the teeth meet the work.

What does bi-metal construction change?

Bi-metal blades combine a cutting edge and a backing strip made for different roles. Several picks here describe high speed steel or M42 teeth joined to a backing designed to flex or resist fatigue.

That construction can be useful on portable saws, where the blade follows a small wheel path, and in metal cutting where heat and wear matter. It doesn't make every bi-metal blade interchangeable: the loop length, width and thickness still need to match.

For a different blade type or saw, start with the tool and material match. A blade's material claims matter only after it fits the machine.

How can you check a blade fits your saw?

Check the blade length, width and thickness against the saw manual or the blade currently installed. A 44-7/8 in portable loop, a 64-1/2 in horizontal saw loop and a 93-1/2 in stationary blade are different sizes, even when each is 1/2 in wide.

Also confirm the saw's intended material use, speed range and capacity. A blade marketed for metal may still be a poor match if its length or width falls outside the machine's limits.

Portable saw buyers can compare the exact model needs in our portable band saw blade guide. Milwaukee users should also check the fit for their specific saw before choosing among the 44-7/8 in Milwaukee band saw blades.

Which metal cutting band saw blade should you choose?

Choose the Lenox for a common 44-7/8 in portable saw and 14 TPI, Bosch for a compatible stationary saw and thin stock, or a variable-pitch blade when your work includes changing profiles. For thicker solid stock, consider the coarser Oniguard only if its 35-3/8 in size fits your saw.

Before you buy, match the blade dimensions first, then compare tooth spacing with the stock thickness. That simple order narrows the best metal cutting band saw blades to options that suit both the machine and the cut.

Our top 3 picks at a glance

  1. 1 LENOX Tools Portable Band Saw Blades
    Best for common portable cuts

    LENOX Tools Portable Band Saw Blades

    9.7/10 our score

    See it on Amazon
  2. 2 Bosch BS6412-24M 64-1/2 In. 24 TPI Metal
    Best for thin stock

    Bosch BS6412-24M 64-1/2 In. 24 TPI Metal

    9.6/10 our score

    See it on Amazon
  3. 3 Imachinist S933414 M42 93" X 3/4" X
    Best for thin tube profiles

    Imachinist S933414 M42 93" X 3/4" X

    9.5/10 our score

    See it on Amazon