Best picks

8 Best Jigsaw Blades for Laminate Flooring (November 2026)

Updated on · By the Blade & Bench team

The best jigsaw blades for laminate flooring include the DEWALT Jigsaw Blades Set with Case for mixed workshop cuts, the MRCGTCE 50 Piece Contractor Jigsaw Blades Set for broad material coverage, and the BGTEC 50PCS T Shank Jigsaw Blades Set for a mixed material toolbox.

On this page (5 sections)
  1. Which jigsaw blade for laminate flooring fits your work?
  2. How we compared jigsaw blades for laminate flooring
  3. How to cut laminate flooring with a jigsaw
  4. Should you use a general jigsaw blade for laminate flooring?
  5. Final pick for the best jigsaw blade for laminate flooring

The best jigsaw blade for laminate flooring is the Bosch Expert Laminate Clean T128BHM for clean, repeatable cuts in laminate, vinyl and HPL. If you also cut wood, plastic or metal, an assorted T-shank set gives you more blade patterns for the rest of the workshop.

Laminate flooring can chip when the tooth pattern, cutting direction or support does not match the board. The right blade reduces that risk, but it cannot replace a steady feed rate and a firm workpiece setup.

The picks below are ordered by score. Our score weighs specs, features and buyer feedback against what you are shopping for.

That ordering separates a blade built for one abrasive sheet material from a general wood blade that fits the same saw. It also keeps dedicated flooring choices ahead of broad assortments when clean edges matter more than quantity.

If your job is a single room with many straight cuts, a focused laminate blade is usually the simpler starting point. If the same project also needs curves, openings or cuts in other materials, the extra patterns in a set can earn their place.

Look at the stated material first and the tooth direction second. A blade that suits laminated particle board may still be a poor match for solid laminated vinyl or HPL.

Pay attention to shank fit before you compare anything else. A T-shank or T-insert blade only helps when your jigsaw accepts that mounting style without force.

Keep the board supported close to the line and let the blade do the work. Pushing through a laminate board often lifts the edge, widens the kerf and makes chipping more likely.

Use an offcut for a short test when you are trying a new blade on a visible board. That check shows whether the top face stays clean and whether the cut drifts before you commit to the real piece.

Store spare blades by model so the same setup can be repeated on the next board. Mixing similar looking blades in one loose pile makes it easy to pick a fast rough cut blade when you needed a controlled finish cut.

When a blade starts to rub, tear or wander, replace it rather than forcing another pass. Fewer, cleaner cuts usually take less time than repairing a chipped edge.

Setup and care matter as much as the blade choice in daily use. Keep teeth dry, wipe off dust after cutting and check the shoe and blade clamp before each session so the saw stays square to the board.

Our picks at a glance

  1. 1 DEWALT Jigsaw Blades Set with Case
    Best for mixed workshop cuts

    DEWALT Jigsaw Blades Set with Case

    9.6/10 our score

    See it on Amazon
  2. 2 MRCGTCE 50 Piece Contractor Jigsaw Blades Set
    Best for broad material coverage

    MRCGTCE 50 Piece Contractor Jigsaw Blades Set

    9.5/10 our score

    See it on Amazon
  3. 3 BGTEC 50PCS T Shank Jigsaw Blades Set
    Best for a mixed material toolbox

    BGTEC 50PCS T Shank Jigsaw Blades Set

    9.4/10 our score

    See it on Amazon
  1. 4BerryBoi 50-PCS T-Shank Jigsaw Blades Set

    BerryBoi 50-PCS T-Shank Jigsaw Blades Set

    Best for varied DIY projects
    Check it
  2. 5Bosch 2X Expert Laminate Clean T128BHM JigsawCheck it
  3. 6BerryBoi 52 PCS T-Shank Jigsaw Blade Set

    BerryBoi 52 PCS T-Shank Jigsaw Blade Set

    Best for a large job-site assortment
    Check it
  4. 7Janchi 50Pack T101BR T-Shank Contractor Jig SawCheck it
  5. 8JMD 30-Piece T101B 4 Inch 10TPI Jigsaw

    JMD 30-Piece T101B 4 Inch 10TPI Jigsaw

    Best for budget wood cutting
    Check it

Which jigsaw blade for laminate flooring fits your work?

The best choice depends on whether you need a dedicated laminate blade or a set that covers several materials. Choose Bosch for a focused flooring blade, Janchi for repeated downcut cuts, or an assorted T-shank set for mixed projects.

1

DEWALT Jigsaw Blades Set with Case: Best for mixed workshop cuts

DEWALT Jigsaw Blades Set with Case, jigsaw blades for laminate flooring
9.6/10Our score
  • 14-piece T-shank set
  • Wood and metal applications
  • HCS and bi-metal blades
  • Case included

A mixed set for readers who cut more than laminate flooring. Its T-shank design fits Bosch and DEWALT jigsaws, and the set includes HCS and bi-metal blades.

See it on Amazon

Pros

  • Wood and metal coverage
  • T-shank fit for Bosch and DEWALT jigsaws
  • Storage case

Cons

  • Not a laminate-specific blade set
  • Mixed blade types require careful selection

The DEWALT set is a strong all-around choice when laminate flooring is only one part of your work. It contains 14 T-shank blades for wood and metal, with both HCS and bi-metal blades in the set.

Its T-shank design fits Bosch and DEWALT jigsaws. That makes it useful for readers who already use either brand and want a case with several blade types in one place.

For laminate flooring, select a blade intended for a controlled wood cut rather than the fastest rough cut. The set does not center on laminate, so buyers who install flooring often may prefer the dedicated Bosch option below.

The included case is a practical detail for a small workshop. It keeps different lengths and tooth patterns apart, which matters when you move from a flooring cut to a metal or wood job on the same day.

Bi-metal blades in the mix are aimed at tougher material work, while HCS blades suit wood cutting. Sorting them before the saw is clamped saves time and prevents the wrong blade from being fitted under pressure.

If you want more detail on brand-specific options, compare our guide to best Bosch jigsaw blades and the guide to best DeWalt jigsaw blades.

DEWALT Jigsaw Blades Set with CaseCheck it on Amazon
2

MRCGTCE 50 Piece Contractor Jigsaw Blades Set: Best for broad material coverage

MRCGTCE 50 Piece Contractor Jigsaw Blades Set, jigsaw blades for laminate flooring
9.5/10Our score
  • 50-piece assorted set
  • T-shank design
  • Wood, plastic and metal blades
  • Storage case

This large assorted set includes downcut and fine-cut wood blades that can help with laminated particle board and double-sided laminates. It also covers plastic and metal.

See it on Amazon

Pros

  • 50 blades
  • Downcut T101BR option
  • Storage case

Cons

  • More choices to sort through
  • Not every blade suits laminate flooring

The MRCGTCE set suits a workshop that moves between wood, plastic and metal. It includes 50 assorted T-shank blades, with T101AO, T101B and T101BR models for several wood-cutting jobs.

The T101BR blades use a reverse-tooth pattern for splinter-free cuts on the top surface. That makes them a useful choice when the visible face of a laminated board needs extra care.

The T101AO model is described for curved cuts in double-sided laminates, laminated particle board, MDF and plywood. Use that pattern for curves, not as a replacement for a straight-cut flooring blade.

A storage case helps keep the 50 pieces separated. The trade-off is that you need to identify the model and tooth pattern before each cut.

The metal models in the set cover thin sheet metal up to medium thickness for straight cuts. Keeping those blades clearly apart from the wood blades prevents a costly wrong choice on a finished flooring board.

For a flooring project with door trims and other shaped cuts, the curved option can help around openings. Straight rips still need a straight pattern, so one blade type will not cover every line in the room.

MRCGTCE 50 Piece Contractor Jigsaw Blades SetCheck it on Amazon
3

BGTEC 50PCS T Shank Jigsaw Blades Set: Best for a mixed material toolbox

BGTEC 50PCS T Shank Jigsaw Blades Set, jigsaw blades for laminate flooring
9.4/10Our score
  • 50-piece T-shank set
  • SK5 high-carbon steel and M2 high-speed steel
  • Wood and metal models
  • Compatible with most jigsaws

The BGTEC set separates wood and metal blade types by model. Its T101BR option is the useful starting point for a downcut approach on laminate-related work.

See it on Amazon

Pros

  • 50-piece assortment
  • Wood and metal coverage
  • Most-jigsaw compatibility

Cons

  • The set is broader than flooring work
  • Blade selection matters for clean cuts

BGTEC gives you 50 T-shank blades split between wood and metal work. Its SK5 high-carbon steel wood blades include T101AO, T101B, T101BR and T144D models.

The T101BR is the most relevant model for laminate-related work because it is designed for straight cutting of wood. BGTEC also describes T101AO for curved wood cuts, so the set covers more than one flooring shape.

The M2 high-speed steel T118A and T118B blades are for thin and medium-thickness metal. Those pieces do not belong in a laminate flooring cut, but they add value if your projects change materials.

The wider set includes a faster T144D wood pattern for rough straight work. That speed is useful on hidden cuts, but it is not the first choice when the visible face must stay clean.

BGTEC says the set is compatible with most jigsaws. Confirm the T-shank connection on your saw before you start.

Label each row in the case by model and use so a repeat cut uses the same blade. That habit matters more in a 50 piece set than in a small pack with only one pattern.

BGTEC 50PCS T Shank Jigsaw Blades SetCheck it on Amazon
4

BerryBoi 50-PCS T-Shank Jigsaw Blades Set: Best for varied DIY projects

BerryBoi 50-PCS T-Shank Jigsaw Blades Set, jigsaw blades for laminate flooring
9.1/10Our score
  • 50-piece T-shank set
  • Wood, metal and plastic blades
  • HCS construction
  • Plastic storage case

This set suits a DIY toolbox that needs more than one blade style. The T101B and T119BO choices cover cleaner wood cuts and curved work around laminate projects.

See it on Amazon

Pros

  • 50 blades
  • Plastic case
  • Several wood-cutting models

Cons

  • No dedicated laminate model
  • Assorted blades need matching to the cut

BerryBoi's 50-piece set is aimed at varied DIY work. It includes T101B, T119BO, T111C and T144D wood models, along with T118A and T118B blades for thin and medium sheet metal.

The T101B pattern supports clean wood cuts, while T119BO is intended for clean finishes and intricate curves. Those choices can help when a flooring project includes straight rips, openings or shaped cuts.

The HCS construction and plastic case keep the set simple to carry and sort. Its main limitation is that it does not include a blade named specifically for laminate flooring.

The T111C and T144D patterns move the set toward faster wood work and different cut styles. They widen the range for trim and site carpentry, but they also mean the flooring blade must be picked with care.

Check the saw fit before ordering. The stated compatible machines include Bosch, DEWALT and Makita.

For a DIY user who cuts flooring one weekend and sheet goods the next, that mix can reduce repeat purchases. For a flooring only job, a dedicated laminate or downcut pack remains a cleaner match.

BerryBoi 50-PCS T-Shank Jigsaw Blades SetCheck it on Amazon
5

Bosch 2X Expert Laminate Clean T128BHM Jigsaw: Best for clean laminate cuts

Bosch 2X Expert Laminate Clean T128BHM Jigsaw, jigsaw blades for laminate flooring
8.9/10Our score
  • Carbide technology
  • Oppositely arranged teeth
  • 92 mm length
  • 2 blades included

This is the most focused choice for laminate flooring and other abrasive sheet materials. Bosch says the carbide blade lasts up to 50 times longer than its T101B blade in tough materials.

See it on Amazon

Pros

  • Made for laminate-related materials
  • Carbide tooth strip
  • Clean-cut tooth arrangement

Cons

  • Only 2 blades
  • Narrower use than an assorted set

The Bosch Expert Laminate Clean T128BHM is the most focused pick for laminate flooring. It is made for solid laminated vinyl, PVC, reinforced vinyl and HPL, with a carbide tooth strip and a 92 mm length.

Bosch says its carbide technology lasts up to 50 times longer than the Bosch T101B blade in tough materials. That is a manufacturer claim, not a promise for every flooring job, but it explains why this blade stands apart from general HCS options.

The opposite tooth arrangement is designed for clean cuts on both sides of the surface. That can matter when both faces of a board need to stay presentable.

The pack contains 2 blades, so it is less flexible than a 30-piece or 50-piece assortment. It fits jigsaws with a T-insert shank.

The short list of materials is the point of this blade. Laminate, vinyl and HPL can dull ordinary teeth quickly, so a carbide strip is aimed at keeping the edge working through repeated cuts.

Care is simple because there are only two blades to track. Keep them dry, avoid forcing them through a thick stack and test the tooth direction on an offcut before a visible cut.

Bosch 2X Expert Laminate Clean T128BHM JigsawCheck it on Amazon
6

BerryBoi 52 PCS T-Shank Jigsaw Blade Set: Best for a large job-site assortment

BerryBoi 52 PCS T-Shank Jigsaw Blade Set, jigsaw blades for laminate flooring
8.7/10Our score
  • 52-piece set
  • HSS and CRV blades
  • Wood, metal and plastic coverage
  • T-shank design

The 52-piece assortment gives you several wood blade patterns, including T101BR for downcut work and T101AO for curves. It also covers thin and medium-thickness metal.

See it on Amazon

Pros

  • Largest set here
  • Wide machine compatibility
  • Several wood blade patterns

Cons

  • More blades than a flooring-only job needs
  • Requires organized storage and selection

The BerryBoi 52-piece set is suited to a job site or home workshop that needs many blade patterns. It includes T101B and T101BR for straight wood cuts, T101AO for curves, and T144D for faster wood cutting.

Its HSS and CRV blade mix also covers metal and plastic. The stated compatibility includes Bosch, DEWALT, Makita and Milwaukee machines, which gives the set broad use across a mixed toolbox.

For laminate flooring, start with T101BR when you want a downcut pattern, or T101B when the cut and visible surface call for a general wood blade. Do not choose by blade count alone.

The extra count helps when work moves between thin metal, medium metal and wood thicknesses. Each model has a stated range, so matching the blade to the thickness is part of getting a smooth edge.

A large set is useful only when the models stay organized. Mark the case or keep the tooth patterns separated so you can repeat the same cut setup.

That organization also protects the blade in storage. Teeth that knock against each other in a loose box can dull before the first real cut, which is a false economy on any job.

BerryBoi 52 PCS T-Shank Jigsaw Blade SetCheck it on Amazon
7

Janchi 50Pack T101BR T-Shank Contractor Jig Saw: Best for repeated downcut work

Janchi 50Pack T101BR T-Shank Contractor Jig Saw, jigsaw blades for laminate flooring
8.6/10Our score
  • 50 T101BR blades
  • 4 in length
  • 10 teeth per inch
  • High-carbon steel

A single-pattern pack makes sense when you repeatedly want a downcut blade for laminated boards. The 4 in, 10 TPI format favors straight cuts rather than detailed curves.

See it on Amazon

Pros

  • 50 matching blades
  • Downcut pattern
  • Made for laminated boards

Cons

  • Less versatile than assorted sets
  • Not a dedicated carbide laminate blade

Janchi is the simple choice for repeated straight cuts where you want 50 matching T101BR blades. Each blade is 4 in long and has 10 teeth per inch.

The downcut style is intended for clean and precise straight cutting in hardwood, softwood, laminated boards, fiber boards and PVC plastic. That makes it more focused than a mixed set for a flooring project with many similar cuts.

The high-carbon steel construction is suited to wood material. It is not the same type of specialized carbide blade as the Bosch T128BHM, so the Bosch remains the more focused option for abrasive laminate materials.

Choose Janchi when consistency and replacement supply matter more than having several tooth patterns.

A single pattern pack also simplifies the setup for a crew or a long run of boards. Every blade behaves the same way, so feed rate and support can stay consistent from the first cut to the last.

The trade-off is clear on curved work. A 4 in downcut blade is aimed at straight lines, so detailed curves need a different model from an assorted set.

Janchi 50Pack T101BR T-Shank Contractor Jig SawCheck it on Amazon
8

JMD 30-Piece T101B 4 Inch 10TPI Jigsaw: Best for budget wood cutting

JMD 30-Piece T101B 4 Inch 10TPI Jigsaw, jigsaw blades for laminate flooring
8.4/10Our score
  • 30-piece T101B set
  • 4 in length
  • 10 TPI
  • Chrome-vanadium steel

The JMD set is a practical wood-cutting option for laminate particle board and similar materials. Its T101B pattern is a general clean-cut choice, not a flooring-specific carbide design.

See it on Amazon

Pros

  • 30 blades
  • Common T-shank format
  • Storage box

Cons

  • General wood blade
  • No dedicated downcut or carbide laminate blade

The JMD set is a straightforward option for general wood cutting. It includes 30 T101B blades, each 4 in long with 10 TPI, and uses chrome-vanadium steel.

The T101B pattern is made for clean cuts in hard and soft wood, plastics, OSB, plywood and laminated particle board from 3/16 in to 1-1/4 in. That range makes it useful for some laminate-related work when the board matches the blade's intended material range.

Its T-shank design fits jigsaws from Milwaukee, Bosch, DEWALT and SKIL. The plastic storage box helps keep the blades together between projects.

Pick JMD for a general wood blade pack. Choose Bosch when the flooring material is abrasive or when a dedicated laminate design matters more than quantity.

The 10 TPI pattern sits in the middle for everyday wood work. It is controlled enough for straight cuts in board material, but it does not replace a reverse tooth or carbide design on a finished laminate face.

For budget minded buyers, 30 matching blades reduce the worry about running out mid job. Keep a few spares in the box and replace the blade when the edge starts to polish rather than bite.

JMD 30-Piece T101B 4 Inch 10TPI JigsawCheck it on Amazon

How we compared jigsaw blades for laminate flooring

The most important factor is whether the blade matches the material and the visible face of the cut. A dedicated laminate blade gets the closest match, while downcut wood blades offer a practical alternative for laminated boards.

We checked the stated tooth patterns, materials, lengths, shank types and intended uses. We also separated general wood blades from models specifically described for laminate, vinyl or HPL.

T-shank compatibility comes first

Most picks here use a T-shank format, but compatibility still needs a quick check. Bosch describes its laminate blade for jigsaws with a T-insert shank, while other sets name specific compatible brands or most jigsaws.

Do not force a blade into a saw with a different mounting system. If you're unsure about blade types, our guide to scroll saw blades for jigsaw explains why those blades are not automatically interchangeable.

Downcut and opposite tooth patterns

A downcut blade cuts toward the top face as the saw moves, which can reduce visible chipping on that surface. The Janchi T101BR and the T101BR models in the assorted sets are the clearest examples here.

Bosch uses oppositely arranged teeth in the T128BHM. Bosch describes the design as producing a clean cut on both sides, which is useful when both faces of the flooring board matter.

Length and tooth count

A 4 in blade gives you room for common board cuts, but length alone does not determine cut quality. Tooth count, tooth direction and material all affect how the blade behaves.

The 10 TPI Janchi and JMD blades favor common straight wood cuts. The Bosch T128BHM uses a dedicated laminate design instead of relying only on a general TPI choice.

For thicker wood projects rather than flooring, see our guide to best long jigsaw blades for wood.

How to cut laminate flooring with a jigsaw

Mark the cut on the board, support the board close to the cut line and secure it so it cannot move. Use a blade that matches the visible face, then let the saw move at a controlled pace without forcing it.

For a downcut blade, place the visible finished face upward if that matches the blade cutting direction. For another tooth pattern, follow the blade intended orientation and make a short test cut on an offcut when possible.

Keep the shoe flat on the board. Lifting or rocking the saw can widen the cut and increase chipping, especially around corners and narrow openings.

Start with a slow, steady feed and watch the line rather than the blade. A jigsaw that is pushed sideways will follow a wandering path, and laminate edges show that drift more than most wood cuts.

Support both sides of the cut when the board is long or the offcut is heavy. An unsupported piece can drop at the end of the cut and snap the corner that you were trying to keep clean.

Use a straight edge or a marked guide for long rips so the saw has a clear path. Freehand cutting is fine for rough sizing, but visible flooring lines deserve the extra control.

Vacuum dust between cuts and replace a blade when it bends, drifts or stops cutting cleanly. A dull blade can create more heat and roughness even when the blade type is correct.

Clean the sole plate and check that the blade clamp holds the shank fully seated. A loose blade vibrates more, heats faster and leaves a rougher edge on laminate and laminated board.

For inside corners and door openings, cut slowly and stop before the blade reaches the corner. Back the saw out with care so the kerf does not tear as the blade is withdrawn.

Test any change of blade on an offcut from the same board when the finish matters. Tooth direction, board thickness and support can change the result more than the brand name on the pack.

Keep the work area clear of loose offcuts so the board cannot shift during the final pass. A firm setup at the start is cheaper than a second blade and a damaged piece at the end.

Should you use a general jigsaw blade for laminate flooring?

A general wood blade can work on laminated particle board, but it may not last or cut as cleanly as a blade made for abrasive laminate materials. The Bosch T128BHM is the dedicated option in this group.

Assorted sets make more sense when one flooring project also includes plywood, plastic or metal. A single-pattern T101BR pack makes sense when you repeat straight downcut work and do not need the other models.

The honest trade-off is between focus and flexibility. A dedicated blade narrows your choice to one job, while a set spreads the cost across many materials and cuts.

General HCS blades are often the right tool for hidden cuts and rough sizing. They become a compromise when the top face is decorative and the material dulls teeth before the board is finished.

Laminate flooring is different from plywood, even though both can be cut with wood blades. Our guide to best saw blade for plywood covers that separate material choice.

A reciprocating saw is also a different tool with a different cutting motion. Read What Is the Difference Between a Jigsaw and a Reciprocating Saw? before switching saw types for a flooring cut.

If a general blade is used, choose a fine or controlled pattern and keep the feed light. Test on an offcut first, support the board close to the line and replace the blade at the first sign of tearing.

That approach can give a usable result on laminated board without pretending it matches a carbide laminate design. Knowing the limit helps you decide when the dedicated blade is worth the narrower fit.

Final pick for the best jigsaw blade for laminate flooring

The Bosch Expert Laminate Clean T128BHM is the best jigsaw blade for laminate flooring when clean cuts in laminate, vinyl or HPL are the main goal. Choose the Janchi T101BR pack for repeated downcut straight cuts, or choose DEWALT, MRCGTCE, BGTEC, BerryBoi or JMD when you need blades for several materials.

For a flooring-only job, prioritize the material and tooth direction over the number of blades. If your workshop also cuts metal, plastic or wood, an assorted T-shank case may be the better long-term fit.

Check shank compatibility before you order any of these options. A blade that is perfect for the board still will not help if your jigsaw uses a different mounting system.

For repeated straight work in laminated boards, a matching downcut pack keeps the setup simple and consistent. For curves and openings, keep a scroll or curved pattern in the case and use it only where the shape needs it.

Set up the board with support close to the cut and a steady feed rate. That care, paired with the right tooth pattern, does more for a clean edge than speed or extra pressure.

Replace a blade when it stops biting cleanly rather than trying to finish the board on a dull edge. A fresh blade on laminate usually saves time on cleanup and repairs.

Readers comparing saws for other materials can also review best reciprocating saw blades for wood and best miter saw blades for aluminum.

Store the remaining blades by model in a dry case and label the rows when the set is large. Good storage keeps the next blade change quick and keeps the teeth from knocking together between jobs.

Choose the dedicated Bosch blade for the flooring itself, then add an assortment only if the wider workshop work justifies it. That split keeps the flooring edge clean without giving up flexibility for the next project.

Our top 3 picks at a glance

  1. 1 DEWALT Jigsaw Blades Set with Case
    Best for mixed workshop cuts

    DEWALT Jigsaw Blades Set with Case

    9.6/10 our score

    See it on Amazon
  2. 2 MRCGTCE 50 Piece Contractor Jigsaw Blades Set
    Best for broad material coverage

    MRCGTCE 50 Piece Contractor Jigsaw Blades Set

    9.5/10 our score

    See it on Amazon
  3. 3 BGTEC 50PCS T Shank Jigsaw Blades Set
    Best for a mixed material toolbox

    BGTEC 50PCS T Shank Jigsaw Blades Set

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What jigsaw blade is best for laminate flooring?

The Bosch Expert Laminate Clean T128BHM is the most focused choice here because it is made for laminated vinyl, PVC and HPL, with carbide construction and oppositely arranged teeth. For a lower-cost general option, use a fine-tooth or downcut T-shank blade suited to laminated boards.

Check your jigsaw's shank system before installing any blade.

How do you stop laminate flooring from chipping with a jigsaw?

Use a blade suited to laminate, support the board close to the cut and keep the saw steady. A downcut blade places its cutting action toward the top surface, while the Bosch T128BHM uses an opposite tooth arrangement for clean cutting on both sides.

Cutting technique still matters, so avoid forcing the saw.

Can you use a T101BR blade for laminate flooring?

Yes, a T101BR blade can suit laminated boards when its T-shank fits your jigsaw. The Janchi pack is a 10 TPI, 4 in downcut option for wood, laminated boards and PVC plastic.

It is a general high-carbon steel blade, so it is different from a carbide blade made specifically for abrasive laminate materials.

What TPI is best for laminate flooring?

A fine or medium tooth pattern is usually easier to control on thin laminate than a coarse, fast-cut blade. The products here include 10 TPI T101B and T101BR blades, plus the Bosch T128BHM laminate blade.

Match the blade to the board and the cut shape instead of choosing TPI alone.