Best picks

6 Best Replacement Pads for DeWalt Orbital Sanders (November 2026)

Updated on · By the Blade & Bench team

The best DeWalt orbital sander replacement pads include the Gnellkoor Orbital Sander Pad Replacement for Dewalt for most DWE6423 repairs, the NYXCL 5 inch DeWalt DWE6423/6423K for a pad and abrasive refresh, and the Gnellkoor 5 Inch 8 Holes Hook Loop for a metal backplate.

On this page (6 sections)
  1. How we chose the best DeWalt orbital sander replacement pad
  2. What to check before buying a DeWalt orbital sander replacement pad
  3. The best DeWalt replacement pads for different repairs
  4. How to replace a DeWalt orbital sander pad
  5. How to keep a replacement pad working longer
  6. Which DeWalt orbital sander replacement pad should you choose?

The best DeWalt orbital sander replacement pad for most DWE6423 owners is the Gnellkoor 2 Pack, because it combines a 5 inch, 8-hole layout with compatibility across several DeWalt random orbital sanders.

Choose the NYXCL set when you also need discs and interface pads, or the DEWALT DWE64233 when you want a single-brand replacement without extra parts.

A replacement pad controls how the abrasive disc sits on the sander. When the pad surface is worn, the disc can slip and the dust holes may no longer line up cleanly.

That can make sanding feel uneven even when the disc is new. Start by matching the sander model, pad diameter, screw holes and dust-hole layout before you compare price or extras.

Those details decide whether the pad will fit, and no extra accessory can fix a wrong pattern. If you are comparing sander styles, our guide to different types of sanders explains where random orbital sanders fit.

For a broader comparison of compatible parts, see our guide to the best orbital sander replacement pad. Use those guides to check the basics, then come back to model numbers for the exact purchase.

A second pad suits people who work with more than one compatible sander, or who do not want to wait for a replacement mid-job. For workshop use, that spare can reduce downtime when a hook surface becomes packed with dust.

Check the disc pattern as well, because an 8-hole pad needs discs with openings in the right places. If the holes are blocked or misaligned, dust collection will suffer even if the pad itself is new.

Also check the screw pattern, because the pad must sit flat and tight against the sander. Keep the original screws if they are in good condition, since replacement screws are not included with some of these pads.

When in doubt, write down the full sander model and compare it with the list on the product page. Photos of your existing pad can also help you confirm the hole layout before you order.

Once the fit is confirmed, a simple pad suits a straightforward repair, while a kit suits a wider refresh of pads, interface pieces and abrasives.

Our picks at a glance

  1. 1 Gnellkoor Orbital Sander Pad Replacement for Dewalt
    Best for most DWE6423 repairs

    Gnellkoor Orbital Sander Pad Replacement for Dewalt

    9.7/10 our score

    See it on Amazon
  2. 2 NYXCL 5 inch DeWalt DWE6423/6423K
    Best for a pad and abrasive refresh

    NYXCL 5 inch DeWalt DWE6423/6423K

    9.6/10 our score

    See it on Amazon
  3. 3 Gnellkoor 5 Inch 8 Holes Hook Loop
    Best for a metal backplate

    Gnellkoor 5 Inch 8 Holes Hook Loop

    9.5/10 our score

    See it on Amazon
  1. 4DEWALT Hook And Loop Pad for Sanders

    DEWALT Hook And Loop Pad for Sanders

    Best for a single-brand replacement
    Check it
  2. 5DEWALT DWE7801 Soft Backing Pad for DCE800

    DEWALT DWE7801 Soft Backing Pad for DCE800

    Best for DCE800 drywall sanding
    Check it
  3. 6VANPET 52 Pcs Sander Pad & Discs

    VANPET 52 Pcs Sander Pad & Discs

    Best for a wide grit range
    Check it

How we chose the best DeWalt orbital sander replacement pad

The best DeWalt orbital sander replacement pad must match the tool before it adds any extra features. We compared the named DeWalt models, pad size, hole pattern, material, included pieces and the type of work each set supports.

The main picks are 5 inch pads with 8 dust holes. That pattern matters because the abrasive disc, backing pad and sander openings need to line up for dust to move through the tool.

We also separated direct pad replacements from larger kits. A kit with discs can be useful when your abrasives are low, but it is not automatically better if your only goal is to replace a worn hook surface.

Our score weighs specs, features and buyer feedback against what you're shopping for. We did not treat the DWE7801 as a general DWE6423 option because it is a rectangular pad for the DCE800 drywall sander and DWE7800.

ProductBest forSizeHole patternPackOur score
Gnellkoor Orbital Sander Pad Replacement for Dewaltmost DWE6423 repairs5 inch4 screw holes and 8 dust holes2 pads9.7
NYXCL 5 inch DeWalt DWE6423/6423Ka pad and abrasive refresh5 inch8-hole hook and loop35 pieces9.6
Gnellkoor 5 Inch 8 Holes Hook Loopa metal backplate9.5
DEWALT Hook And Loop Pad for Sandersa single-brand replacement5 inch1 pad9.2
DEWALT DWE7801 Soft Backing Pad for DCE800DCE800 drywall sanding8.9
VANPET 52 Pcs Sander Pad & Discsa wide grit range4 screw holes and 8 dust holes8.7

What to check before buying a DeWalt orbital sander replacement pad

Model compatibility is the first check. DWE6423 and DWE6423K appear in several product descriptions, but some options also name DWE6420, DWE6421, DWE6421K and DCW210B.

That wider list matters because a pad made for one DeWalt model may not suit another, even when the tool names look similar. Check the full model details on your sander label rather than relying on the family name alone.

Suffixes and kit letters can point to variants, so a careful match at this stage saves a return later. Pad size is the next check.

Most options here use a 5 inch diameter, while the DWE7801 is a separate rectangular pad for DCE800 and DWE7800 tools. For a DWE6423 or DWE6421, the 5 inch size is the one to compare.

Measure the diameter of your existing pad if the label is hard to read or the model is unclear. Even a small size difference can change how a disc seats and how the edge feels during sanding.

The screw pattern also matters. Gnellkoor and VANPET specify 4 screw holes, with adjacent and non-adjacent center distances of 1.38 in and 1.97 in.

Those measurements help you confirm that the mounting points will line up with the sander. If the holes are placed differently, the pad will not sit flat, no matter how good the hook surface looks.

Measure your existing pad if your model is uncertain. Turn the sander over with the power disconnected, then check the hole positions against the product details.

Also note whether your original screws are still usable, since some replacement pads do not include new screws. Finally, check the dust-hole count.

An 8-hole pad is intended for sanding discs with the same layout, so mixing patterns can block collection openings or leave holes misaligned. Count the holes in the pad and in the discs you plan to use before you fit anything.

If the discs have fewer holes, some openings will be covered and dust will have nowhere to go. A matching layout also helps the disc sit evenly, which supports a more consistent surface.

Think about the work you will do most often, since that affects which extras are worth having. A pad-only option suits a simple hook-surface replacement, while a kit can suit a wider sanding refresh.

For drywall finishing, the rectangular DWE7801 belongs with its named tools and should not be used as a stand-in for a round pad. Once model, size, screw pattern and hole count all match, the remaining choice is about material, included discs and whether you want a spare pad.

The best DeWalt replacement pads for different repairs

The Gnellkoor 2 Pack is the strongest general choice for common DWE6423-style repairs. The other options are better when you need a full abrasive kit, a metal backplate, a DEWALT part or a pad for a drywall sander.

1

Gnellkoor Orbital Sander Pad Replacement for Dewalt: Best for most DWE6423 repairs

Gnellkoor Orbital Sander Pad Replacement for Dewalt, DeWalt orbital sander replacement pads
9.7/10Our score
  • 2 replacement pads
  • 5 inch, 8-hole hook and loop design
  • Fits DWE6420, DWE6421, DWE6423 and DCW210B
  • Engineering plastic and soft rubber

This 2-pack covers several DeWalt random orbital sanders and uses a 5 inch, 8-hole layout. The engineering plastic and soft rubber construction suits a direct pad replacement when your existing hook surface is worn.

See it on Amazon

Pros

  • Broad DeWalt model compatibility
  • Includes 2 pads
  • 8 dust holes support dust collection

Cons

  • Replacement screws are not included

The Gnellkoor Orbital Sander Pad Replacement for Dewalt is the best fit for a routine pad replacement on a named DeWalt random orbital sander. It includes 2 pads, so you have a spare for a later repair or a second compatible tool.

Each pad is 5 inches wide with 4 screw holes and 8 dust holes. The specified center distances are 1.97 in between non-adjacent screw holes and 1.38 in between adjacent holes.

The named compatible models include DWE6420, DWE6421, DWE6421-B2, DWE6421-B3, DWE6421-BR, DWE6421K, DWE6423, DWE6423K and DCW210B. The pad uses engineering plastic and soft rubber, with the rubber intended to reduce vibration.

This set also includes 36 sanding discs and 4 foam pieces in the product data, with discs across 100, 150, 180, 240, 320 and 405 grits. The installation instructions call for removing the 4 pad screws, and the screws are not included.

Choose it when you want broad model coverage and a second pad. Confirm your tool and keep the original screws available before starting.

Gnellkoor Orbital Sander Pad Replacement for DewaltCheck it on Amazon
2

NYXCL 5 inch DeWalt DWE6423/6423K: Best for a pad and abrasive refresh

NYXCL 5 inch DeWalt DWE6423/6423K, DeWalt orbital sander replacement pads
9.6/10Our score
  • Fits DWE6423, DWE6421 and DCW210B
  • 4 replacement pads
  • 4 soft interface pads
  • 30 aluminum oxide discs from 100 to 400 grit

NYXCL combines a replacement pad with interface pads and 30 sanding discs. Its 100 to 400 grit range covers common wood sanding, metal grinding and polishing tasks.

See it on Amazon

Pros

  • Includes replacement and interface pads
  • 30 discs in 6 grits
  • Fits several DWE6423 and DWE6421 variants

Cons

  • A larger kit than needed if you only need the backing pad

The NYXCL 5 inch DeWalt DWE6423/6423K set is best when a worn pad is only part of your sanding refresh.

It includes 1 replacement pad, 4 soft interface pads and 30 aluminum oxide discs. The discs cover 100, 150, 180, 240, 320 and 400 grit.

That range gives you coarse and finer choices for wood sanding, metal grinding and polishing without buying a separate abrasive pack immediately. The replacement pad is designed for 5 inch, 8-hole hook and loop discs.

Compatibility includes DWE6423, DWE6423K, DWE6421, DWE6421K, DCW210B, DWE6421-B2, DWE6421-B3, DWE6421-BR and DWE6420. Confirm your exact model first, because the pad is built around that DeWalt pattern and 8-hole layout.

The interface pads are made for sanding contours and edges where a softer layer can help the abrasive follow the surface. That softer layer can suit curved work where a hard pad alone may bridge over the shape.

Use the kit when those extra pieces match the job, rather than treating the 35-piece count as a reason to buy by itself. If your discs are still fresh and you only need a pad, a simpler option may suit you better.

Keep the disc holes aligned with the pad so dust can pass through the openings. Store the unused discs flat and dry, so the abrasive stays ready for the next job.

NYXCL 5 inch DeWalt DWE6423/6423KCheck it on Amazon
3

Gnellkoor 5 Inch 8 Holes Hook Loop: Best for a metal backplate

Gnellkoor 5 Inch 8 Holes Hook Loop, DeWalt orbital sander replacement pads
9.5/10Our score
  • Metal pad with premium rubber
  • Fits DWE6423, DWE6421 and DCW210B
  • 4 foam interface pads
  • 36 discs from 100 to 400 grit

This Gnellkoor set uses a metal backplate with rubber and adds foam interface pads plus 36 discs. It fits the named DeWalt models and suits buyers who want a replacement pad with sanding supplies.

See it on Amazon

Pros

  • Metal backplate
  • Includes 4 foam interface pads
  • 36 discs in 6 grits

Cons

  • The center hole is intended for some DeWalt models, so model matching matters

The Gnellkoor 5 Inch 8 Holes Hook Loop set is the best choice here for a metal pad with sanding supplies.

Its pad uses a metal backplane and premium rubber, and it includes 4 foam interface pads plus 36 sanding discs.

The named DeWalt compatibility includes DWE6420, DWE6421, DWE6421-B2, DWE6421-B3, DWE6421-BR, DWE6421K, DWE6423, DWE6423K and DCW210B.

The set is built around a 5 inch, 8-hole pattern.

Check the center hole carefully, because a metal backplate does not overcome a mismatched center opening.

The 36 discs cover 100, 150, 180, 240, 320 and 400 grit.

That spread suits work that moves from shaping and cleaning a surface to finer smoothing and polishing.

The foam pieces are intended for concave and convex surfaces, including automobile, furniture, appliance shells and woodworking edges.

A foam layer can help the abrasive follow a curve instead of riding over the high points.

Use the foam pieces when the shape of the work calls for that softer contact.

For flat panels, the pad and disc alone may be enough, and the foam can stay in reserve.

The metal backplate suits buyers who prefer a firmer base than a plastic pad.

It also suits longer sessions where pad strength matters more than a softer feel.

Pair the pad with the right grit for the material, and align the disc holes with the pad openings.

Keep the hook surface clean between disc changes, so each disc grips evenly.

If you only need a bare pad, this larger set may be more than you need.

Gnellkoor 5 Inch 8 Holes Hook LoopCheck it on Amazon
4

DEWALT Hook And Loop Pad for Sanders: Best for a single-brand replacement

DEWALT Hook And Loop Pad for Sanders, DeWalt orbital sander replacement pads
9.2/10Our score
  • 5 inch replacement pad
  • 8-hole design
  • Woven retention material
  • Fits DWE6423 and DWE6421

The DEWALT DWE64233 is a single 5 inch, 8-hole replacement pad for DWE6423 and DWE6421 sanders. It is a straightforward choice when you want the DEWALT part number and do not need extra discs.

See it on Amazon

Pros

  • DEWALT-branded replacement
  • 8-hole dust-collection layout
  • Hook and loop abrasive changes

Cons

  • Only 1 pad is included

The DEWALT Hook And Loop Pad for Sanders is the simplest option for buyers who need 1 DEWALT-branded 5 inch replacement pad.

Its DWE64233 model is designed for DWE6423 and DWE6421 sanders.

The pad has 8 holes for sanders with dust collection and uses woven retention material for the hook and loop surface.

That woven surface is there to hold the abrasive disc in place during use.

It is a direct replacement choice when you already have suitable sanding discs and do not need a larger accessory set.

This suits a repair where the pad is worn but your discs are still serviceable.

The 5 inch size supports switching between grits as the work changes.

You can move from a coarser disc for shaping to a finer disc for smoothing without changing the pad.

Keep the disc pattern matched to the pad so the holes remain aligned.

That alignment helps dust move through the pad and into the collection path.

It also helps the disc sit flat, which supports even contact with the work.

Choose this pad when brand and part-number clarity matter more than receiving extras.

It is a single-pad pack, so it does not provide a spare.

That trade-off is worth it if you want the DEWALT part number and a clean, simple swap.

If you want a spare for later, or discs to go with it, a kit may suit you better.

For this pad, focus on fit, hole alignment and keeping the hook surface free of packed dust.

DEWALT Hook And Loop Pad for SandersCheck it on Amazon
5

DEWALT DWE7801 Soft Backing Pad for DCE800: Best for DCE800 drywall sanding

DEWALT DWE7801 Soft Backing Pad for DCE800, DeWalt orbital sander replacement pads
8.9/10Our score
  • Soft foam design
  • For DCE800 cordless drywall sander
  • For DWE7800
  • 1 back pad

The DWE7801 is a specialized soft backing pad for the DCE800 cordless drywall sander and DWE7800. It belongs in this guide for that tool family, not as a substitute for a 5 inch DWE6423 pad.

See it on Amazon

Pros

  • Soft foam design
  • Specific DCE800 compatibility
  • DEWALT-branded part

Cons

  • Not a 5 inch random orbital sander pad

The DEWALT DWE7801 Soft Backing Pad for DCE800, DWE7800 is the right pick only for the named drywall sanding tools.

It is a soft foam, rectangular backing pad for the DCE800 cordless drywall sander and DWE7800.

That shape and soft foam build set it apart from the round 5 inch pads elsewhere in this guide.

This is not a general 5 inch replacement pad for the DWE6423.

Its purpose is fine drywall finishing, and the package contains 1 back pad.

For drywall work, the soft foam design is meant to suit fine finishing rather than aggressive material removal.

The different shape is the important buying detail.

A rectangular pad will not match the mounting and disc pattern of a DWE6423 or DWE6421 random orbital sander.

If your tool is a DWE6423 or DWE6421, compare it with the 5 inch, 8-hole options above instead.

Those round pads are built for hook and loop discs and dust collection on those sanders.

Trying to adapt the DWE7801 to that job would lead to poor fit and poor control.

So use this part number only when your tool is the DCE800 or DWE7800 named for it.

For other DeWalt sanders, keep the search within round pads that match the model and hole layout.

DEWALT DWE7801 Soft Backing Pad for DCE800Check it on Amazon
6

VANPET 52 Pcs Sander Pad & Discs: Best for a wide grit range

VANPET 52 Pcs Sander Pad & Discs, DeWalt orbital sander replacement pads
8.7/10Our score
  • 2 plastic 5 inch, 8-hole pads
  • 50 discs from 40 to 800 grit
  • Engineering plastic and soft rubber
  • Fits DWE6421, DWE6423 and DCW210B

VANPET pairs 2 replacement pads with 50 discs ranging from 40 to 800 grit. The broad range suits projects that move from stripping and smoothing to fine polishing.

See it on Amazon

Pros

  • 50 discs across 10 grits
  • 2 replacement pads
  • Broad DeWalt compatibility

Cons

  • Plastic pad rather than a metal backplate

The VANPET 52 Pcs Sander Pad & Discs Combo Kit is best for buyers who want 2 replacement pads and a broad range of 50 sanding discs.

Its discs run from 40 to 800 grit in 10 grits, covering coarse stripping through fine polishing. The pads are 5 inch, 8-hole designs with 4 screw holes and 8 dust holes.

The specified screw-hole distances are 1.97 in between non-adjacent holes and 1.38 in between adjacent holes. Those details help you confirm that the pads will mount correctly on the named sanders.

Compatibility includes DWE6420, DWE6421, DWE6421-B2, DWE6421-B3, DWE6421-BR, DWE6421K, DWE6423, DWE6423K and DCW210B. The pads use engineering plastic and soft rubber.

The soft rubber is intended to reduce vibration from the sander for improved results. The 50 discs include 5 each of 40, 60, 80, 120, 180, 240, 320, 400, 600 and 800 grit.

That range suits projects that need to start coarse and finish fine without buying separate packs. Choose this kit when you will use several grit levels across a job or across several jobs.

Skip it if you need a metal backplate instead, or if you only need one pad and already have discs. Two pads also give you a spare, which can help when a hook surface wears or becomes clogged.

Keep the original screws for fitting, since replacement screws are not included. Align each disc so its holes match the pad, and press the hook and loop surface evenly.

That simple care keeps grip secure and dust collection working as intended.

VANPET 52 Pcs Sander Pad & DiscsCheck it on Amazon

How to replace a DeWalt orbital sander pad

Replacing a DeWalt orbital sander pad starts with safe power removal and a confirmed hole pattern. Disconnect a corded tool or remove the battery before turning the sander over.

That step keeps the tool from starting while your hands are near the pad and screws. Remove the 4 screws that hold the old pad to the tool.

Keep the screws together, because the Gnellkoor and VANPET instructions note that replacement screws are not included. Lay them on a clean surface where they will not roll away or pick up dust.

Clean dust from the contact area before fitting the new pad. Dust left under the pad can stop it from sitting flat.

Set the replacement pad in place, align the screw holes and tighten the original screws evenly. Even tightening helps the pad sit square and reduces wobble during use.

Attach an 8-hole sanding disc so its dust openings match the pad. Press the hook and loop surface evenly, then check that the disc sits flat before starting the sander.

Press around the edge as well as the centre, so the disc grips all the way across. That even grip helps the disc stay put when you change grits or move to a new section of work.

Run the tool briefly without pressing hard into the work. Stop if the disc shifts, the pad wobbles or the screw fit feels wrong.

Those signs can point to a mismatched hole pattern, loose screws or a disc that is not seated properly. Correct the fit before you sand, rather than hoping the disc will settle during the job.

Once the pad and disc sit flat, you can start work with more control. Keep the work area clear and let the sander move in light passes.

That approach protects the new pad and helps the abrasive last longer.

How to keep a replacement pad working longer

Use the correct disc size and hole pattern for the pad. A disc that overhangs the pad or blocks the dust holes can make sanding less even and reduce collection.

Matching the pattern also helps the disc sit flat, which keeps contact with the work more consistent. Check the match each time you change a disc, not only when you fit a new pad.

A quick glance at the holes takes seconds and can save a poor finish. Avoid storing the sander with a dusty disc pressed against the hook surface.

Remove the disc after use and brush loose dust from the pad without cutting into the hooks. A stiff brush works well for this, and gentle strokes protect the hook surface.

That hook surface is what holds the next disc, so care here keeps grip strong. Avoid scraping the pad with a sharp tool, since cuts in the hooks will weaken hold.

If dust is packed into the surface, clean it in short passes and check the result. Do not press a used disc back onto a clean pad and leave it there.

Dust trapped between the two can reduce grip and can make the next change harder. Check the pad when abrasive paper starts slipping.

A worn hook surface, torn rubber or loose screw fit can affect control and may mean the pad needs replacement. Slipping is often the first sign that the pad has reached the end of its useful life.

Also check for soft spots, edge damage or a pad that no longer sits flat on the sander. Tighten the screws if needed, but do not force a damaged pad back into service.

In dusty work, check the pad more often, because fine dust can pack the hooks quickly. In cleaner work, a pad may last longer, but it still deserves the same regular checks.

Keep discs stored flat and dry, so they stay ready to fit without warping. Dust collection also depends on the tool and extractor.

Our guide to DeWalt orbital sander dust collection covers ways to improve the rest of the setup, while the best DeWalt orbital sander bag guide focuses on replacement dust bags. Treat the pad as one part of a system rather than the whole answer.

A clean pad, a matched disc and a clear collection path work together for better results. When you replace the pad, take a moment to confirm the model, size, screw holes and dust holes again.

That habit keeps a simple maintenance task from turning into a fitting problem.

Which DeWalt orbital sander replacement pad should you choose?

Pick the Gnellkoor 2 Pack for the best all-around DWE6423-style replacement, especially when a second pad is useful. Choose NYXCL if you want interface pads and discs, or the metal Gnellkoor set if a metal backplate fits your model.

Choose the DEWALT DWE64233 for a single-brand 5 inch pad. Choose the DWE7801 only for the DCE800 or DWE7800, and choose VANPET when its 40 to 800 grit range matches the work ahead.

If you use a different brand of random orbital sander, compare the matching model and pad pattern in our best Bosch orbital sander replacement pad guide. A best corded random orbital sander may also be worth considering when your current tool needs repeated pad repairs.

For smaller detail work, see the guide to best detail sander replacement pads. The main rule is simple: match the tool model, 5 inch size, screw holes and 8-hole dust layout before comparing included extras.

Our top 3 picks at a glance

  1. 1 Gnellkoor Orbital Sander Pad Replacement for Dewalt
    Best for most DWE6423 repairs

    Gnellkoor Orbital Sander Pad Replacement for Dewalt

    9.7/10 our score

    See it on Amazon
  2. 2 NYXCL 5 inch DeWalt DWE6423/6423K
    Best for a pad and abrasive refresh

    NYXCL 5 inch DeWalt DWE6423/6423K

    9.6/10 our score

    See it on Amazon
  3. 3 Gnellkoor 5 Inch 8 Holes Hook Loop
    Best for a metal backplate

    Gnellkoor 5 Inch 8 Holes Hook Loop

    9.5/10 our score

    See it on Amazon

Frequently asked questions

What replacement pad fits a DeWalt DWE6423?

A 5 inch, 8-hole pad that matches the DWE64233 or N329079 part pattern fits the DeWalt DWE6423. The Gnellkoor, NYXCL, Gnellkoor metal and DEWALT options here name DWE6423 compatibility.

Confirm the model and screw-hole layout before removing the old pad.

Can you use a DWE6423 pad on a DWE6421?

Several pads in this guide name both the DWE6423 and DWE6421 as compatible models. The Gnellkoor, NYXCL, metal Gnellkoor, DEWALT and VANPET options all include those model families in their compatibility details.

Check the exact tool model and hole pattern before ordering.

How do you replace a DeWalt orbital sander pad?

Unplug the sander or remove its battery, then remove the 4 screws holding the old pad. Fit the replacement pad and reinstall the screws.

The Gnellkoor and VANPET instructions note that replacement screws are not included, so keep the original hardware if it is suitable.

Does an 8-hole sanding pad improve dust collection?

An 8-hole pad lines up with sanding discs and dust paths designed for that layout. The pad alone cannot guarantee a clean work area because collection also depends on the sander, disc and dust extractor.

Keep the holes clear and use a matching disc pattern.

Is the DWE7801 compatible with a DWE6423?

No compatibility is given here between the DWE7801 and DWE6423. The DWE7801 is a rectangular soft backing pad for the DCE800 cordless drywall sander and DWE7800.

Choose a 5 inch, 8-hole pad for a DWE6423 instead.