Best picks

9 Best Featherboards for Router Tables (November 2026)

Updated on · By the Blade & Bench team

The best featherboards for router tables include the BOW Products EVA Featherboard Table Saw for low-vibration feed control, the POWERTEC Universal Tandem Featherboards for Table Saw for two-board setups, and the Hedgehog Spiral Featherboard for Table Saws for one-handed adjustment.

On this page (5 sections)
  1. The best featherboards for router tables by use
  2. How do you choose a featherboard for a router table?
  3. How should you set up a router table featherboard?
  4. Can a featherboard work with other woodworking machines?
  5. Verdict: which is the best featherboard for router table work?

The best featherboard for router table work is the BOW Products EVA Featherboard Table Saw. Its reversible EVA feathers, 3/4 in miter bar and T-track bolts give it the broadest fit across common router table setups.

That breadth matters because router tables vary. A miter slot on one table may suit a different bar than a T-track on another, so mounting options can decide whether a board is useful at all.

Choose the POWERTEC Universal Tandem model if you want 2 featherboards and extra mounting hardware. The Hedgehog is easier to adjust with one hand, while Magswitch is the quickest choice for a compatible ferrous tabletop.

A featherboard holds stock against a fence or table as you feed it past the router bit. That pressure helps limit side-to-side movement, but it does not replace a proper fence, push tool or safe feed direction.

Think of it as side support rather than the main guide. The fence still sets the cut line, and your hands still need a safe way to move the trailing end of the stock.

The BOW model suits a user who moves between setups and wants EVA contact that is less rigid than hard plastic. Its feathers flex against the stock and can be reversed or replaced when wear shows.

Setup care is simple but not optional. Check that the miter bar or T-bolts are fully seated, tighten the knobs, and confirm the feathers press the stock without making the feed feel forced.

The trade-off is that this is a single featherboard. A layout that calls for pressure at two points will need another board.

If you are still choosing the rest of your setup, start with our guide to wood routers for woodworking. Then compare the best router table fence for the surface where your featherboard will work.

Fence height and shape change where the board can sit. Measure the slot or track before you order, then pick the board that matches that hardware.

Our picks at a glance

  1. 1 BOW Products EVA Featherboard Table Saw
    Best for low-vibration feed control

    BOW Products EVA Featherboard Table Saw

    9.7/10 our score

    See it on Amazon
  2. 2 POWERTEC Universal Tandem Featherboards for Table Saw
    Best for two-board setups

    POWERTEC Universal Tandem Featherboards for Table Saw

    9.7/10 our score

    See it on Amazon
  3. 3 Hedgehog Spiral Featherboard for Table Saws
    Best for one-handed adjustment

    Hedgehog Spiral Featherboard for Table Saws

    9.6/10 our score

    See it on Amazon
  1. 4Magswitch Universal Featherboard for Table SawsCheck it
  2. 5POWERTEC Tandem Featherboard & L-Shaped Fits Table

    POWERTEC Tandem Featherboard & L-Shaped Fits Table

    Best for feed control plus pushing
    Check it
  3. 6BOW Products Portable Saw Featherboard FP5

    BOW Products Portable Saw Featherboard FP5

    Best for compact table setups
    Check it
  4. 7POWERTEC Safety Kit

    POWERTEC Safety Kit

    Best for a wider safety kit
    Check it
  5. 8BOW Products FeatherDUO FP3 Featherboard for TableCheck it
  6. 9Kreg True-FLEX Featherboard

    Kreg True-FLEX Featherboard

    Best for a simple single board
    Check it

The best featherboards for router tables by use

The best featherboard for router table work depends on how your table mounts accessories, how often you change setups and whether you need one board or a complete safety kit. These picks are ordered by score, then matched to a specific shop need.

Our score weighs specs, features and buyer feedback against what you're shopping for. We checked the mounting systems, adjustment methods, materials and included parts for router table use.

1

BOW Products EVA Featherboard Table Saw: Best for low-vibration feed control

BOW Products EVA Featherboard Table Saw, featherboards for router tables
9.7/10Our score
  • Closed-cell EVA feathers
  • 3/4 in AnchorPRO miter bar
  • Two 1-1/2 in T-bolts
  • Reversible replaceable feathers

Closed-cell EVA feathers provide flexible contact against the fence, while the miter bar and T-bolts cover common router table mounting options.

See it on Amazon

Pros

  • EVA feathers
  • Reversible and replaceable feathers
  • Miter slot and T-track mounting

Cons

  • Single featherboard
  • Needs a compatible slot or T-track

The BOW Products EVA Featherboard Table Saw is the strongest all-around choice for router table users who want flexible mounting. Its closed-cell EVA feathers press against the workpiece while absorbing vibration, and the reversible design can be replaced when needed.

The included 3/4 in AnchorPRO miter bar fits a 3/8 x 3/4 in miter slot. Two 1-1/2 in T-bolts with 5/16-18 threads fit 1/4 to 3/4 in T-tracks, so you can move the board between tables with different mounting layouts.

The dual 6 in travel slots give you room to position the board against different fence locations. That matters when a router fence has a tall face, a dust port or other hardware that changes where the stock needs support.

Choose this model when you want EVA contact and several mounting choices in one board. Its trade-off is that it remains a single featherboard, so a two-point setup requires another board.

BOW Products EVA Featherboard Table SawCheck it on Amazon
2

POWERTEC Universal Tandem Featherboards for Table Saw: Best for two-board setups

POWERTEC Universal Tandem Featherboards for Table Saw, featherboards for router tables
9.7/10Our score
  • 2 featherboards
  • Miter lock system
  • Horizontal and vertical mounting hardware
  • Stackable design

This 2-pack gives you two featherboards plus miter slot brackets, T-bolts, knobs and stacking hardware for flexible router table arrangements.

See it on Amazon

Pros

  • Two featherboards
  • T-slot and miter slot compatibility
  • Stacking hardware included

Cons

  • Plastic body
  • More hardware to organize

The POWERTEC Universal Tandem Featherboards are best when you want two boards in one setup. The kit includes 2 featherboards, threaded 5-star knobs, T-bolts and miter slot brackets.

Its miter lock system works with T-slots and standard miter slots. The extra hardware supports horizontal and vertical mounting, while spacers and longer screws allow the boards to be stacked for a taller arrangement.

The plastic and metal construction keeps the kit flexible for router tables, table saws and band saws. On a router table, two boards can help maintain pressure at separate points along a long fence.

Choose it when you expect to change layouts or want a second board ready for another machine. The trade-off is a larger collection of knobs, brackets and screws to sort during setup.

For more control over the fence itself, compare our guide to the best router fence track.

POWERTEC Universal Tandem Featherboards for Table SawCheck it on Amazon
3

Hedgehog Spiral Featherboard for Table Saws: Best for one-handed adjustment

Hedgehog Spiral Featherboard for Table Saws, featherboards for router tables
9.6/10Our score
  • Single pivot knob
  • Reversible design
  • Impact-resistant polymer body
  • Aluminum expanding miter bar

The spiral body pivots into position with one knob, making it a strong fit when you often change the featherboard position between router table tasks.

See it on Amazon

Pros

  • One-handed adjustment
  • Reversible left or right feed
  • Vibration-absorbing polymer body

Cons

  • Does not fit 5/8 in slots
  • Single miter-slot mounting method

The Hedgehog Spiral Featherboard is the best pick for quick one-handed adjustment. Its spiral body pivots into position with one knob, so you can loosen, move and tighten the board without managing two separate knobs.

The reversible design supports left-side and right-side feed operations. Its impact-resistant polymer body is designed to flex against the stock, and the aluminum expanding miter bar fits standard 3/4 in wide by 3/8 in deep miter slots.

That slot measurement is the key buying check. This model does not fit 5/8 in slots, so measure your router table before choosing it.

The Hedgehog suits a shop where setup speed matters more than broad T-track compatibility. It is also a compact single-board option for routing edge profiles, but it does not include a second featherboard or a T-track mounting kit.

Set the cutter correctly with this guide to setting a router bit before routing.

Hedgehog Spiral Featherboard for Table SawsCheck it on Amazon
4

Magswitch Universal Featherboard for Table Saws: Best for ferrous tabletops

Magswitch Universal Featherboard for Table Saws, featherboards for router tables
9.5/10Our score
  • Two magnetic switches
  • 95 lb hold force per switch
  • Double-sided layout
  • No miter slot limitation on ferrous surfaces

Two on/off Magswitches let you position this featherboard on compatible ferrous tables or fences without relying on a miter slot.

See it on Amazon

Pros

  • Fast magnetic positioning
  • Works on either side
  • Double-sided design

Cons

  • Requires a ferrous surface
  • Not a universal fit for nonmetal tables

The Magswitch Universal Featherboard is the best choice for a ferrous tabletop or fence. Its 2 magnetic switches each provide 95 lb of hold force, and you turn them on or off by twisting the controls.

That twist action is the whole setup method. You place the board, twist to lock, and the magnets hold it in position without a slot, track or clamp.

It suits a router table user who changes featherboard position often during a session. Repositioning for a different bit or stock width does not need tools, so the board can move as the work changes.

The double-sided layout works on either side of the blade or cutter. It also supports infeed and outfeed positioning on a compatible tabletop or fence, without depending on a miter slot.

That flexibility helps when the best pressure point is not beside a slot. On a ferrous cast iron or steel surface, the board can sit where the work needs support rather than where the hardware allows.

This makes the setup fast when your router table has a suitable ferrous surface. The main limitation is the surface requirement.

A nonmetal table cannot use the magnetic mounting method, so confirm the material before choosing this model. Laminate, phenolic and aluminum surfaces will not give the magnets the grip they need.

Care is mostly a matter of keeping the contact surfaces clean. Dust and debris under the magnets can reduce the hold, so a quick wipe before each setup keeps the lock reliable.

Choose Magswitch when fast repositioning matters and your table supports it. For dust control at the fence, see our guide to the best router fence with dust port.

Magswitch Universal Featherboard for Table SawsCheck it on Amazon
5

POWERTEC Tandem Featherboard & L-Shaped Fits Table: Best for feed control plus pushing

POWERTEC Tandem Featherboard & L-Shaped Fits Table, featherboards for router tables
8.9/10Our score
  • Universal featherboard
  • 8.5 in L-shaped push stick
  • Reversible mounting
  • Miter lock system

The featherboard controls stock against the fence, while the included L-shaped push stick adds a separate way to guide material during router table work.

See it on Amazon

Pros

  • Includes push stick
  • Reversible featherboard
  • Works with T-tracks and T-slots

Cons

  • One featherboard
  • Push stick makes the kit larger to store

The POWERTEC Tandem Featherboard and L-Shaped Fits Table kit is best for combining fence pressure with a push tool. It includes 1 universal featherboard and 1 deluxe L-shaped push stick.

The featherboard handles side pressure against the fence, while the push stick gives your hand a safer way to guide the trailing end. The two solve different control tasks, so one does not replace the other.

The featherboard has a reversible design and miter lock system for T-tracks and T-slots. The push stick is 8.5 in long, with a thick ergonomic profile, non-slip foam rubber pad and an interior notch for 90-degree stock corners.

That notch matters on square stock. It lets the stick seat against a corner instead of sliding along a flat face as you push.

On a router table, the push stick also helps keep your fingers farther from the cutter during the final part of a pass.

Choose this kit if you need both pieces and want color-coded POWERTEC polymer tools. Its trade-off is storage space, since you are buying a safety pair rather than a featherboard alone.

It suits a shop that runs table saws, router tables, planers and jointers with the same safety habits. Check the miter slot or T-track fit before first use.

POWERTEC Tandem Featherboard & L-Shaped Fits TableCheck it on Amazon
6

BOW Products Portable Saw Featherboard FP5: Best for compact table setups

BOW Products Portable Saw Featherboard FP5, featherboards for router tables
8.8/10Our score
  • High-density EVA feathers
  • 5/8 and 3/4 in miter bars
  • T-track compatibility
  • Reversible replaceable feather

Its compact body and two miter bars suit smaller work surfaces, while T-track compatibility gives router table users another mounting option.

See it on Amazon

Pros

  • Compact size
  • Two miter bars
  • EVA feathers

Cons

  • Designed around portable and contractor saws
  • Single featherboard

The BOW Products Portable Saw Featherboard FP5 is the best fit for a compact table setup. Its body is smaller than the full-size BOW model, and it includes both 5/8 in and 3/4 in miter bars.

That compact body is the main reason to choose it. On a smaller work surface, a larger board can crowd the fence or leave little room for your hands around the stock.

The high-density EVA feathers are reversible and replaceable. T-track compatibility adds another mounting option for a router table, while the compact size suits smaller work surfaces where a larger board could crowd the fence.

EVA feathers flex against the workpiece instead of acting like rigid fingers. That gives a firm hold with less marking risk on soft woods, and the feathers absorb some vibration during the feed.

Although the title focuses on portable and contractor saws, the mounting options can also help on a router table when the slot or track matches. Measure first because the two miter bars do not guarantee fit with every table.

The two bar sizes cover more tables than a single size would. Still, slot depth and track shape can vary, so a quick measurement before ordering avoids a board that will not lock in.

Choose FP5 when you value compact dimensions and EVA contact. Its trade-off is that it is a single board, and the design is less suited to a tall stacked setup than the FeatherDUO.

It suits benchtop and contractor-style setups where space is tight. On a full-size router table, the larger BOW model may give more adjustment room.

BOW Products Portable Saw Featherboard FP5Check it on Amazon
7

POWERTEC Safety Kit: Best for a wider safety kit

POWERTEC Safety Kit, featherboards for router tables
8.7/10Our score
  • Universal featherboard
  • L-shaped push stick
  • Deluxe push blocks
  • Reversible mounting

This set adds push blocks and an L-shaped push stick to the universal featherboard, giving a router table user several stock-control tools.

See it on Amazon

Pros

  • Three-piece set
  • Push blocks included
  • 11-1/2 in push stick reach

Cons

  • More pieces than a featherboard-only purchase
  • Takes more storage space

The POWERTEC Safety Kit is best for a broader stock-control setup. It includes 1 universal featherboard, 1 deluxe L-shaped push stick and deluxe push blocks.

The featherboard uses reversible mounting for T-tracks and T-slots. The push stick has an 11-1/2 in reach, a 90-degree notch and built-in magnets for storage.

The push blocks add another way to guide stock during face jointing, ripping and routing.

For a router table, this is more than a featherboard purchase. The set gives you separate tools for holding stock against the fence, guiding the workpiece and keeping your hands away from cutters.

If you are building the table itself, see how to build a trim router table.

Choose it if you need to fill out a shop safety kit. Its trade-off is that it includes more pieces than a featherboard-only setup and needs more storage space.

POWERTEC Safety KitCheck it on Amazon
8

BOW Products FeatherDUO FP3 Featherboard for Table: Best for taller stock

BOW Products FeatherDUO FP3 Featherboard for Table, featherboards for router tables
8.5/10Our score
  • Stackable EVA featherboards
  • Included risers
  • Replaceable reversible feathers
  • T-track hardware

The stackable platform gives more height choices than a single featherboard, which helps when a router table setup needs pressure higher on the workpiece.

See it on Amazon

Pros

  • Stackable to 3-1/2 in
  • EVA feathers
  • Works separately or stacked

Cons

  • Heavier 2.4 lb design
  • More setup parts

The BOW Products FeatherDUO FP3 is the best option for taller stock and changing pressure height. The stackable design reaches up to 3-1/2 in with the included risers, or 1-1/2 in without them.

That height range is what sets it apart from a single featherboard. Pressure higher on the workpiece can help control taller stock that would rise above a low board.

It includes 2-3/4 in miter bars, knobs, 4 3/8 in T-bolts and 2 1/4 in T-bolts. The UltraFLEX EVA feathers are reversible and replaceable, and the boards can work stacked or separately.

Working separately gives two pressure points along a fence. Stacking gives one taller point, so the same kit can cover short and tall stock without a second purchase.

That flexibility helps when the workpiece height changes between router table jobs. A taller pressure point can be useful when the fence and stock require support higher above the table surface.

The EVA feathers are water jet cut for precision, according to the product description, and they flex to keep contact without marring softer woods. That matters when a taller setup needs firmer pressure.

Choose FeatherDUO when height adjustment is central to your setup. Its trade-off is a heavier 2.4 lb design and more parts to position than a single featherboard.

More parts also mean more setup steps. Risers, bolts and knobs need to be checked each time, so keep the hardware together between jobs.

BOW Products FeatherDUO FP3 Featherboard for TableCheck it on Amazon
9

Kreg True-FLEX Featherboard: Best for a simple single board

Kreg True-FLEX Featherboard, featherboards for router tables
8.0/10Our score
  • Flexible composite body
  • Wedge-Lock mounting system
  • Miter slot and T-slot fit
  • Mounting hardware included

The Kreg True-FLEX keeps the setup focused on one featherboard, with Wedge-Lock hardware for standard miter slots and T-slots.

See it on Amazon

Pros

  • Simple one-board setup
  • Miter slot and T-slot mounting
  • Mounting hardware included

Cons

  • Single featherboard
  • Plastic composite body

The Kreg True-FLEX Featherboard is the best pick for a simple single-board setup. It includes 1 featherboard, mounting hardware and an owner's manual.

That simple contents list is part of the appeal. There is one board to learn, one mounting system to set, and no extra hardware to sort when the job changes.

Its flexible composite body applies pressure against the fence and table. The Wedge-Lock mounting system fits standard miter slots and T-slots, so it covers the two mounting styles found on many router tables.

The Wedge-Lock design is meant to hold securely with vibration resistance. That is useful on a router table, where the board should stay put through the full pass.

This is a straightforward choice when you do not need a 2-pack, magnetic mounting or a push-stick kit. The plastic composite body keeps the design focused, but it does not offer the EVA feather material found on the BOW picks.

EVA and composite will feel different during a feed. EVA feathers tend to absorb vibration, while a composite body gives a more direct pressure feel.

Choose Kreg when you want one featherboard with both miter-slot and T-slot mounting. Its trade-off is a lower score here because it has fewer included accessories and a less flexible material system than the higher-ranked options.

It suits a router table user who wants a known brand and a focused tool. For taller stock or two-point pressure, a stackable or 2-pack option will cover more ground.

Kreg True-FLEX FeatherboardCheck it on Amazon

How do you choose a featherboard for a router table?

Choose a featherboard by mounting fit first, then compare adjustment, pressure material and the number of boards included. A board that cannot lock into your table's slot or track cannot help control the workpiece.

That order saves money and frustration. Adjustment speed and feather material only matter once the board can actually mount to your table.

Measure the miter slot width and depth. The Hedgehog needs a 3/4 in wide by 3/8 in deep slot, while the BOW FP5 includes 5/8 in and 3/4 in miter bars.

A board that fits a 3/4 in slot will not fit a 5/8 in slot.

Several POWERTEC and Kreg models support both T-slots and miter slots. That dual fit helps when the same board needs to move between a table saw and a router table.

T-track users should check the bolt range. The BOW Products EVA model accepts 1/4 to 3/4 in T-tracks, and the FeatherDUO uses T-bolts for that range.

A bolt that is too large for the track will not seat.

POWERTEC models add brackets, spacers or stacking screws for more layouts. Those parts help with vertical mounting and stacked arrangements for taller stock, but add pieces to keep track of.

Material changes the feel of the feed. BOW uses EVA feathers that flex and absorb vibration, giving a smooth, firm feed with less risk of marking soft woods.

The feathers can also be reversed or replaced when they wear.

The Hedgehog and Kreg use polymer or composite bodies, while POWERTEC uses plastic and metal. Magswitch uses magnetic mounting on compatible ferrous surfaces, which favors fast repositioning.

Next, count the boards in the kit. A single board suits simple fence pressure, while a 2-pack or stackable set suits longer fences and taller stock.

Push sticks, push blocks and stacking hardware can turn a purchase into a fuller safety kit.

The best choice is the simplest one that matches your table hardware and your typical stock height. Measure first, then weigh the extras.

How should you set up a router table featherboard?

Set the featherboard so it keeps the workpiece against the fence without making the feed hard to control. With the router off, place the board before the cutter, slide a piece of stock through the path and check that the feathers maintain contact without catching.

Keep the featherboard ahead of the bit where it can guide the stock into the cut. The exact position depends on your fence, bit location and feed direction, so use the table's instructions and keep the board clear of the cutter.

Check every knob, bolt, bracket and miter bar before routing. A loose mount can let the board shift, while excessive pressure can make the workpiece harder to feed.

A featherboard manages lateral pressure. It does not replace a push stick or push block for the end of the workpiece, which is why the POWERTEC kits can make sense when you need several forms of stock control.

If your table saw and router table share a fence system, our guide on how to choose a router fence for a table saw covers the related fit questions.

Can a featherboard work with other woodworking machines?

Many of these featherboards also work with table saws or band saws, but the mounting surface and feed direction still matter. The BOW EVA model is titled for table saws, router tables and band saws, while the Hedgehog supports those three surfaces with its reversible design.

That multi-machine range is useful in a small shop. One board can serve more than one machine, which keeps the bench less crowded and the setup habits consistent.

The POWERTEC Universal Tandem model supports table saws, band saws and router tables with miter slot and T-slot hardware. The POWERTEC safety kits add push sticks or push blocks for planers, jointers and other stock-control tasks.

Those kits go beyond the featherboard itself. A push stick or push block handles the trailing end of the stock, which a featherboard cannot do on its own.

Do not assume every table uses the same setup. Check the slot size, track range and available clearance before moving a board from one machine to another.

A fence, guard or dust port on one machine may block the position that worked on another.

Feed direction also changes with the machine. A reversible board helps, but you still need to confirm that the feathers angle into the stock for the direction you will feed.

This is where a 2-pack or stackable design earns its keep. Two boards can give pressure at two points on a longer table saw fence, while a router table may need only one.

For broader saw terminology, see how a miter saw differs from a table saw and what separates a circular saw from a table saw. A benchtop router table may also need a compact board and careful clearance checks.

The safest approach is to treat each machine as its own setup. Mount the board, run a dry pass with the power off, and confirm the stock path before you cut.

Verdict: which is the best featherboard for router table work?

The BOW Products EVA Featherboard Table Saw is the best featherboard for router table work when you want flexible EVA contact, a 3/4 in miter bar and T-track mounting in one board.

Its reversible and replaceable feathers suit a shop that runs many jobs. When the feathers wear, you can flip or replace them instead of buying a whole new board.

Pick the POWERTEC Universal Tandem Featherboards if you need 2 boards and stacking hardware. Choose the Hedgehog for one-handed adjustment, Magswitch for a compatible ferrous tabletop, BOW FP5 for compact surfaces and FeatherDUO for taller stock.

The POWERTEC kits with a push stick or push blocks suit a broader safety setup. They add a way to guide the trailing end of the stock, which a featherboard alone cannot handle.

The right choice comes down to your mounting system and the pressure layout your work requires. Measure the slot or track first, then choose the simplest board that gives steady contact without interfering with the router bit.

Once the mount is confirmed, think about how often you will move the board. Frequent changes favor one-handed or magnetic designs, while stable setups favor a board with more hardware options.

Taller work may need a stackable board or a second board at a higher point.

Match the feather material to the work. EVA suits soft woods and vibration control, while polymer and composite give a firmer pressure feel.

Set whichever board you choose with the router off and run a dry pass first. Confirm that the feathers hold the stock against the fence and that the board stays clear of the bit.

Our top 3 picks at a glance

  1. 1 BOW Products EVA Featherboard Table Saw
    Best for low-vibration feed control

    BOW Products EVA Featherboard Table Saw

    9.7/10 our score

    See it on Amazon
  2. 2 POWERTEC Universal Tandem Featherboards for Table Saw
    Best for two-board setups

    POWERTEC Universal Tandem Featherboards for Table Saw

    9.7/10 our score

    See it on Amazon
  3. 3 Hedgehog Spiral Featherboard for Table Saws
    Best for one-handed adjustment

    Hedgehog Spiral Featherboard for Table Saws

    9.6/10 our score

    See it on Amazon

Frequently asked questions

What does a featherboard do on a router table?

A featherboard presses the workpiece against the router fence or table so the stock moves in a controlled path. That steady side pressure can reduce side-to-side movement and help keep your hands farther from the cutter.

Set it to guide the stock without making feeding unnecessarily difficult.

Do router table featherboards fit every table?

No. Featherboards use different mounting methods, including 3/4 in miter bars, T-bolts, T-slots and magnetic switches.

Measure your table slot before choosing.

The Magswitch model needs a compatible ferrous surface, while several POWERTEC and BOW models support both miter slots and T-tracks.

Should a router table use one or two featherboards?

One featherboard may be enough for side pressure against the fence. Two can help when you want separate control points or a stacked setup.

A 2-pack such as the POWERTEC Universal Tandem Featherboards gives you more layout options, while a single board takes less space and costs fewer setup steps.

How tight should a router table featherboard be?

Set the feathers so they hold the workpiece against the fence with steady pressure while still allowing a smooth feed. Excess pressure can make feeding harder and may affect control.

Make a dry setup with the router off, check the stock path, and confirm the featherboard cannot contact the bit.