Guide

Can a Scroll Saw Cut Metal?

Updated on · By the Blade & Bench team

Yes, a scroll saw can cut some thin, soft metals when you use a compatible fine-tooth blade and a speed suited to the material. Check the saw and blade instructions first; many scroll saws are specified for wood, not metal.

On this page (7 sections)
  1. What metals can a scroll saw cut?
  2. How thick can a scroll saw cut?
  3. Which blade should you use?
  4. How should you set up the cut?
  5. What are the limits of scroll saw metal cutting?
  6. Is a scroll saw right for your metal project?
  7. Can a scroll saw cut metal safely?

Yes, a scroll saw can cut some thin, soft metals when the saw and blade makers approve the combination. Use a blade intended for the exact material, support the work securely, and expect slower, more delicate cutting than with a tool designed for metal.

A scroll saw's stated wood capacity does not tell you how thick a metal sheet it can cut. Check the saw manual and blade guidance before starting, especially for the metal type, thickness, speed, and safe workholding method.

What metals can a scroll saw cut?

A scroll saw may cut thin nonferrous metals, such as copper, if the blade is made for that material. FOXBC describes its 3-inch hobby blades for copper and other soft metals, as well as wood and plastic.

That description doesn't guarantee a safe thickness for your saw or every copper alloy. Check blade compatibility and the machine manual before cutting; don't assume a blade that handles copper can cut steel, stainless steel, or aluminum of any thickness.

If the material is too thick or hard for the specified blade, it can bind, break, or leave a rough cut. For a tool comparison, see can a reciprocating saw cut metal, and compare the jobs each saw suits in What Is the Difference Between a Bandsaw and a Scroll Saw?.

How thick can a scroll saw cut?

There is no universal metal-thickness limit for scroll saws. The safe limit depends on the machine, blade, alloy, and shape of the cut, so use the limits in both the saw and blade instructions.

A saw's wood-cutting capacity applies to wood. For example, WEN describes its 3921 and 3922 models as cutting wood up to 2 inches thick; that figure is not a metal-cutting rating.

If the manual doesn't identify metal as a supported material, contact the manufacturer before trying it. Don't guess a maximum thickness from the saw's motor, throat depth, or advertised wood capacity.

The same rule applies to intricate interior cuts. Thin stock can still flex or catch, so thickness alone doesn't determine whether a particular cut is suitable.

Which blade should you use?

Choose a blade that is specifically compatible with your metal and scroll saw. Check tooth style, tooth count, blade length, and attachment type against both makers' guidance.

The FOXBC blades are 3-inch pin-end blades with 15, 18, and 24 TPI options. FOXBC describes them for copper and other soft metals, but they fit only saws that take 3-inch pinned blades with 2-3/4 inches between pins.

Before buying, confirm that your saw accepts that blade length and pin spacing. Many scroll saws use different blade formats, so a blade can be intended for soft metal and still be incompatible with your machine.

For a comparison focused on metal work, see our best scroll saw for metal guide. If you're choosing a machine mainly for wood projects, compare best scroll saws for woodworking.

How should you set up the cut?

Follow the scroll saw manual for speed, blade tension, and workholding before cutting metal. Use eye protection and keep your hands clear of the blade path.

Support the metal so it stays flat against the table, and avoid forcing it into the blade. A slow, controlled feed can help you maintain the line, but use only a speed the saw maker allows for that material.

If the workpiece vibrates or catches, stop and check the setup. Don't hold a small piece by hand near the blade; use a suitable way to secure it that keeps your hands clear.

A stable stand can help keep a scroll saw steady during detailed work. See our guide to a best scroll saw stand when deciding how to support your machine.

What are the limits of scroll saw metal cutting?

A scroll saw is best considered for small, delicate cuts in approved thin stock. It isn't a general-purpose metal saw, and its wood capacity doesn't define what it can cut in metal.

Thicker or harder material can overload a fine blade or make it difficult to control the cut. A larger workpiece may also be awkward to support on the table, even if the material itself is thin.

WEN describes its 3922 as a variable-speed scroll saw for wood, with a 16-inch throat and wood capacity up to 2 inches. Those features may suit woodworking, but they don't confirm metal compatibility.

For setup basics, see how to use a Ryobi scroll saw or how to use a WEN scroll saw. For angle-cut capacity, read Why Do Saw Cutting Capacities Change at an Angle?.

Is a scroll saw right for your metal project?

A scroll saw can cut metal when the material is thin and soft, and the saw and blade makers approve the setup. Pick another tool if the stock exceeds their limits, the blade binds, or the work can't be held securely.

Use a scroll saw for small, intricate cuts in compatible sheet metal. Choose a tool designed for metal when you need to cut thicker stock or make repeated straight cuts.

A metal-cutting band saw may suit some of those jobs.

Can a scroll saw cut metal safely?

It can, if the saw and blade instructions allow the metal and setup. Wear eye protection, secure the work, and stop if the blade binds or the material shifts.

Don't rely on a wood-capacity figure to choose metal thickness. Confirm the material and thickness with the saw and blade makers before you begin.

Frequently asked questions

Can a scroll saw cut metal?

Yes, a scroll saw can cut some thin, soft metals if the saw and blade makers allow it. Use a blade intended for that material, support the work, and follow the machine instructions.

For thick, hard, or large stock, choose a tool made for metal cutting.

What metals can a scroll saw cut?

A scroll saw may cut thin nonferrous metals such as copper or brass when the blade is rated for them. FOXBC describes its hobby blades for copper and other soft metals.

Check compatibility for the exact metal, alloy, and thickness before cutting.

What blade should I use to cut metal with a scroll saw?

Use a fine-tooth blade that the blade maker identifies for your metal and that fits your saw. FOXBC's 3-inch pinned hobby blades are described for copper and other soft metals, but fit only machines that accept their 3-inch pin-end format.

How thick of metal can a scroll saw cut?

There isn't one safe thickness limit for every scroll saw and blade. The machine, blade type, metal, and cut shape all matter.

Follow both makers' limits, and don't use a scroll saw's wood capacity as its metal capacity.