Best picks

9 Best Corded Reciprocating Saws (November 2026)

Updated on · By the Blade & Bench team

The best corded reciprocating saws include the DEWALT 20V MAX Reciprocating Saw for cordless flush cutting, the SKIL 13 Amp Corded Reciprocating Saw for heavy-duty corded cutting, and the BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless for compact DIY work.

On this page (5 sections)
  1. The best corded reciprocating saws for different jobs
  2. How to choose a corded reciprocating saw
  3. What blade clamp and shoe features do you need?
  4. How do you use and care for a corded reciprocating saw?
  5. Which corded reciprocating saw should you buy?

The best corded reciprocating saw for most heavy-duty work is the SKIL 13 Amp Corded Reciprocating Saw. Its 13 amp motor gives it the highest current rating in this group.

BUZZKILL Technology, a variable speed trigger and a tool-less blade clamp make it easier to control during long cutting jobs. You can stay plugged in and keep cutting without stopping to swap a battery pack.

Corded power makes sense when an outlet is nearby and you want continuous cutting. A workshop outlet or garage receptacle lets the motor draw current all day.

If you need to work away from an outlet, compare these picks with the best cordless reciprocating saw. Cordless tools help on roofs, in yards and inside finished rooms.

This roundup includes corded and cordless alternatives because a corded saw is not always the right fit. We compared motor ratings, speed control, stroke length, blade clamps, shoes and included accessories.

Amp rating hints at electrical capacity, while strokes per minute describes blade motion. Stroke length shapes the cut, with a longer stroke moving the blade farther on each cycle.

The shoe supports the saw against the work, with a pivoting shoe maintaining contact as the angle changes. Included parts change first day cost, since some packages add blades while tool only models assume you own a battery and charger.

Weight and balance decide how the saw feels after an hour. When in doubt, start with the work location, since a close outlet favors corded power and a distant site may favor cordless.

Our picks at a glance

  1. 1 DEWALT 20V MAX Reciprocating Saw
    Best for cordless flush cutting

    DEWALT 20V MAX Reciprocating Saw

    9.7/10 our score

    See it on Amazon
  2. 2 SKIL 13 Amp Corded Reciprocating Saw
    Best for heavy-duty corded cutting

    SKIL 13 Amp Corded Reciprocating Saw

    9.4/10 our score

    See it on Amazon
  3. 3 BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless
    Best for compact DIY work

    BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless

    9.2/10 our score

    See it on Amazon
  1. 4DEWALT Reciprocating Saw

    DEWALT Reciprocating Saw

    Best for flush-cut versatility
    Check it
  2. 5Skil 9206-02 7.5-Amp Variable Speed Reciprocating SawCheck it
  3. 6SEESII Reciprocating Saw Cordless with 2 x

    SEESII Reciprocating Saw Cordless with 2 x

    Best for a ready-to-use cordless kit
    Check it
  4. 7CRAFTSMAN Reciprocating Saw

    CRAFTSMAN Reciprocating Saw

    Best for simple corded control
    Check it
  5. 8CRAFTSMAN V20 RP Cordless Reciprocating Saw

    CRAFTSMAN V20 RP Cordless Reciprocating Saw

    Best for two-speed cordless work
    Check it
  6. 96Amp 2800RPM Corded Reciprocating Saw

    6Amp 2800RPM Corded Reciprocating Saw

    Best for light corded cutting
    Check it

The best corded reciprocating saws for different jobs

The best corded reciprocating saw depends on how much cutting power, control and portability you need. The SKIL 13 Amp is the strongest corded pick, while the DEWALT DWE305 offers a 4-position clamp and the smaller corded models suit lighter work.

Our score weighs specs and features against what you're shopping for. The cordless products remain in the list as alternatives, not as corded recommendations.

1

DEWALT 20V MAX Reciprocating Saw: Best for cordless flush cutting

DEWALT 20V MAX Reciprocating Saw, corded reciprocating saws
9.7/10Our score
  • Up to 3,000 SPM
  • 1-1/8 in stroke length
  • 4-position blade clamp
  • Pivoting adjustable shoe

This cordless DEWALT is a useful alternative when you need variable speed and flush-cutting flexibility without a power cord.

See it on Amazon

Pros

  • 4-position blade clamp
  • Pivoting adjustable shoe
  • Variable speed trigger

Cons

  • Battery and charger sold separately
  • Not a corded saw

The DEWALT 20V MAX Reciprocating Saw is the highest-scoring alternative when you need cordless movement rather than a power cord. Its variable speed trigger reaches up to 3,000 SPM, and the 1-1/8 in stroke length is suited to fast cutting.

The 4-position blade clamp is the main reason to consider it for flush cutting and unusual blade positions. Tool-free blade changes reduce the steps needed when you switch blades between tasks.

A pivoting adjustable shoe can provide leverage during a cut and lets you control the depth of cut. The rubber over-molded grip is designed for comfort and control, while the double oil-sealed shaft is intended to resist contamination.

This is a tool-only package. The battery and charger are sold separately, so check your existing DEWALT battery setup before choosing it over a corded saw.

If you are comparing cordless brand systems, see our guides to the best Milwaukee reciprocating saw and best Makita reciprocating saw.

DEWALT 20V MAX Reciprocating SawCheck it on Amazon
2

SKIL 13 Amp Corded Reciprocating Saw: Best for heavy-duty corded cutting

SKIL 13 Amp Corded Reciprocating Saw, corded reciprocating saws
9.4/10Our score
  • 13 amp motor
  • BUZZKILL Technology
  • Variable speed trigger
  • Tool-less blade clamp

The SKIL combines the highest current rating in this group with vibration suppression and variable speed control.

See it on Amazon

Pros

  • 13 amp motor
  • Vibration suppression
  • Tool-less blade clamp

Cons

  • 9 lb weight
  • One-year limited warranty

The SKIL 13 Amp Corded Reciprocating Saw is the best match for demanding corded work in this group. Its 13 amp motor gives it more current capacity than the 12 amp DEWALT and the 7.5 amp corded models.

BUZZKILL Technology is designed to suppress vibration up to 35% better than the comparison used by the brand. Treat that as a feature claim, but it remains a clear reason to choose this saw when vibration control matters.

The variable speed trigger helps you adjust pace for different materials, starting slow to find the line before increasing speed. Its secure tool-less blade clamp holds the blade without a separate tool, saving time on a dull blade or material change.

The oversize trigger supports different cutting positions, including flush or overhead cuts. At 9 lb, it is heavier than the 7 lb CRAFTSMAN and 7.1 lb SKIL 9206-02, so choose it when motor capacity matters more than carrying weight.

It suits bench, wall and demolition work near an outlet. The 8 in blade gives reach for thicker material, so match the tooth pattern to the material before you start.

For care, unplug before a blade change and check the blade is seated fully. Keep the shoe flat, store the cord without tight kinks and wipe dust from the housing after use.

SKIL 13 Amp Corded Reciprocating SawCheck it on Amazon
3

BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless: Best for compact DIY work

BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless, corded reciprocating saws
9.2/10Our score
  • Up to 3,000 SPM
  • Pivoting blade shoe
  • Tool-free blade change
  • Electric brake

This compact BLACK+DECKER is a cordless choice for DIY cuts in wood, drywall, plastic and other stated materials.

See it on Amazon

Pros

  • Compact 4 lb design
  • Pivoting shoe
  • Electric brake

Cons

  • Battery not included
  • Not a corded saw

The BLACK+DECKER 20V MAX POWERCONNECT is a compact cordless choice for DIY work where a cord would get in the way. It weighs 4 lb and reaches up to 3,000 SPM through a variable speed trigger.

Its pivoting blade shoe helps when you adjust the angle or turn through a cut. Keeping the shoe in contact gives support and helps the blade track more steadily.

The tool-free blade change supports faster blade swaps. Quick swaps matter when one job moves from wood to drywall or plastic in the same session.

The electric brake is included as a built in stopping feature. It is one more control aid to check before you start, along with a firm two handed grip.

The saw is described for wood, nails, drywall, plaster, plastic, rubber composites and fiberglass. Use a blade intended for the material, since tooth pattern changes how cleanly each surface cuts.

It includes one reciprocating saw blade, but the battery is not included. Check that you have a compatible POWERCONNECT battery before you plan the job.

Choose this model when low weight and easy movement matter more than continuous corded power. It is also worth comparing with the best lightweight reciprocating saw.

The compact body suits tight spots and short stretches of work. For long demolition runs near an outlet, a corded saw will avoid battery pauses.

For care, store the saw with the blade removed and the battery separated. Wipe the shoe and clamp area clean so the next blade seats properly.

BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. CordlessCheck it on Amazon
4

DEWALT Reciprocating Saw: Best for flush-cut versatility

DEWALT Reciprocating Saw, corded reciprocating saws
9.1/10Our score
  • 12 amp motor
  • 0–2,900 SPM
  • 1-1/8 in stroke length
  • 4-position blade clamp

The DWE305 brings a 12 amp motor, variable speed trigger and four blade-clamp positions to corded demolition work.

See it on Amazon

Pros

  • 4-position clamp
  • Keyless lever-action changes
  • 12 amp motor

Cons

  • 8 lb weight
  • Designed around wood in the stated surface recommendation

The DEWALT DWE305 is the best corded choice for flush cut versatility. Its 12 amp motor, 0 to 2,900 SPM variable speed trigger and 1-1/8 in stroke length give it a strong balance of power and control.

The 4-position blade clamp is its key feature. It supports flush cutting and lets you position the blade in more ways than a fixed clamp.

That versatility helps when a wall, floor or stud blocks the normal approach. Turning the blade can put the cutting edge where the body of the saw cannot go.

The keyless lever action design makes blade changes quick. A fast change helps when a dull blade slows progress mid job.

At 8 lb, this DEWALT is heavier than the smaller 7.5 amp options. That weight may be a trade off worth accepting when you want the 12 amp motor and four clamp positions.

The package includes the reciprocating saw and a manual. Its stated surface recommendation is wood, so match the blade and cutting plan to the material before starting.

The 1-1/8 in stroke length gives the blade a long travel on each cycle. Variable speed still lets you slow the pace for a controlled start.

For daily use, rest the shoe against the work and keep the blade path clear. Let the stroke cut, rather than pushing the housing forward with extra force.

For care, unplug before blade changes and clear dust from the outside. Check the clamp positions and shoe before the next session.

DEWALT Reciprocating SawCheck it on Amazon
5

Skil 9206-02 7.5-Amp Variable Speed Reciprocating Saw: Best for homeowner projects

Skil 9206-02 7.5-Amp Variable Speed Reciprocating Saw, corded reciprocating saws
9.0/10Our score
  • 7.5 amp motor
  • Tool-less blade change
  • Metal gear housing
  • Pivoting foot

The SKIL 9206-02 is a practical corded choice for homeowner demolition, tree trimming and small projects.

See it on Amazon

Pros

  • Metal gear housing
  • Counter balance
  • Pivoting foot

Cons

  • Lower current rating than the 12 and 13 amp picks
  • 7.1 lb weight

The SKIL 9206-02 is a good homeowner pick for corded demolition, tree trimming and small projects. Its 7.5 amp motor is less powerful on paper than the 12 and 13 amp picks, but it still provides variable speed control and a tool-less blade change.

A heavy-duty metal gear housing is designed for added ruggedness and durability. Metal gearing is a practical point when the saw will see repeated household use.

The counter balance is intended to help control vibration. Less shake can make a long trimming session easier to guide.

The pivoting foot adds stability when the material is difficult to cut. A supported foot helps keep the blade aligned instead of bouncing on the surface.

The included set has the saw, one wood cutting blade and a wrench. At 7.1 lb, it is slightly lighter than the DEWALT DWE305 and the SKIL 13 Amp.

Choose it when your work is mainly household projects and you want corded operation without stepping up to the heaviest motor in the group. It fits demolition of small sections, branch trimming and general repairs.

Variable speed helps at the start of each cut. Ease into the material, then raise the pace once the blade is tracking.

For setup, choose a blade for the material and seat it fully in the clamp. Confirm the foot can rest flat before you pull the trigger.

For care, unplug before changes and wipe dust from the housing. Keep the included blade and wrench with the saw for the next job.

Skil 9206-02 7.5-Amp Variable Speed Reciprocating SawCheck it on Amazon
6

SEESII Reciprocating Saw Cordless with 2 x: Best for a ready-to-use cordless kit

SEESII Reciprocating Saw Cordless with 2 x, corded reciprocating saws
8.7/10Our score
  • Two 21V 4.0Ah batteries
  • Six saw blades
  • 0–3,500 RPM
  • Built-in LED work light

SEESII includes two batteries, a charger and six blades, making it a complete cordless kit rather than a corded saw.

See it on Amazon

Pros

  • Two batteries included
  • Six blades included
  • LED work light

Cons

  • 3.48 kg weight
  • Not a corded saw

The SEESII cordless kit is the most complete battery powered package here. It includes two 21V 4.0Ah batteries, a fast charger, six saw blades, a storage box, a user manual, gloves and safety glasses.

Its brushless motor reaches 0 to 3,500 RPM with a 15 mm stroke length. It is intended for wood, branches, plywood, plastic pipes, aluminum, thin steel and metal tubes.

The included blades cover wood and metal tasks, which helps when one session moves between timber and pipe. A built-in LED work light illuminates dark areas such as cabinets or dim basements, helping you follow the cut line.

The tool-free blade change and safety lock add convenience during swaps and storage. The lock helps prevent accidental activation in a bag or box.

This saw weighs 3.48 kg, so it is not the lightest option despite the cordless design. Choose it when you want a ready-to-use kit with two batteries instead of a bare tool.

Two batteries support longer work without waiting for a charge, with one pack able to charge while the other runs. For setup, charge both packs first and test the blade change.

For care, keep blades in the storage box, wipe the light lens clean and store batteries at a moderate charge when unused.

SEESII Reciprocating Saw Cordless with 2 xCheck it on Amazon
7

CRAFTSMAN Reciprocating Saw: Best for simple corded control

CRAFTSMAN Reciprocating Saw, corded reciprocating saws
8.5/10Our score
  • 7.5 amp motor
  • 0–3,200 RPM
  • 1-1/8 in stroke length
  • Tool-free blade release

This CRAFTSMAN gives you a 7.5 amp corded motor, variable speed trigger and a contoured over-molded handle.

See it on Amazon

Pros

  • 3,200 RPM speed
  • Tool-free blade release
  • Wood blade included

Cons

  • 7 lb weight
  • Stated surface recommendation is wood

The CRAFTSMAN CMES300 is a straightforward corded saw for wood cutting and general household work. Its 7.5 amp motor uses a 1-1/8 in stroke length and reaches 0 to 3,200 RPM through the variable speed trigger.

The tool-free blade release makes blade changes simple, while the contoured over-molded handle is designed for comfort during use.

The package includes one CMES300 saw and one wood blade. That gives you a blade to start with, though you will want more blades for other materials.

At 7 lb, it is the lightest corded saw in this group. That makes it easier to carry than the 8 lb DEWALT DWE305 and 9 lb SKIL 13 Amp, though it has a lower current rating than both.

Choose it for simple corded control and wood focused projects. For broader blade-position options, the DEWALT DWE305 is the better fit.

The 1-1/8 in stroke length suits fast cutting in wood stock. Variable speed lets you slow down for a careful start on a visible line.

The stated surface recommendation is wood. Keep that in mind and choose blades and speed for the material you plan to cut.

For setup, unplug the saw and seat the blade fully in the clamp. Rest the shoe against the work before you increase speed.

For care, clear dust from the housing and check the handle grip after use. Store the cord loose to avoid kinks.

CRAFTSMAN Reciprocating SawCheck it on Amazon
8

CRAFTSMAN V20 RP Cordless Reciprocating Saw: Best for two-speed cordless work

CRAFTSMAN V20 RP Cordless Reciprocating Saw, corded reciprocating saws
8.3/10Our score
  • Brushless motor
  • 0–2,300 and 0–3,200 SPM settings
  • Variable speed trigger
  • LED light

The CRAFTSMAN V20 RP is a cordless alternative with two speed ranges, a brushless motor and an LED workspace light.

See it on Amazon

Pros

  • Two speed settings
  • Brushless motor
  • LED light

Cons

  • Bare tool only
  • Battery not included

The CRAFTSMAN V20 RP is a cordless alternative for work where you need to move around without a cord. Its brushless motor has two speed ranges, 0 to 2,300 SPM on low and 0 to 3,200 SPM on high.

The variable speed trigger adds more control within those ranges. You can set a range for the job, then feather the trigger for a slower start.

A tool-free blade release supports quick blade swaps, and the LED light illuminates the workspace. Light helps in cabinets, under stairs and other dim corners.

This is a bare tool only package. It includes the saw and a 6 in blade, but the battery is not included, so it makes the most sense if you already use the 20V CRAFTSMAN system.

Choose it for cordless two-speed control and a 5.9 lb body. If you need continuous power, choose one of the corded models instead.

The two speed ranges are a practical way to match pace to material. Low range can help with controlled starts, and high range can help with faster stock removal.

The 6 in blade gives reach for branches, timber and panels. Choose the tooth pattern for the material before the cut.

For setup, confirm the battery is charged and the blade is seated fully. Test the LED and blade release before you start.

For care, store the saw without the battery attached. Wipe the shoe and clamp clean so dust does not affect the next blade change.

CRAFTSMAN V20 RP Cordless Reciprocating SawCheck it on Amazon
9

6Amp 2800RPM Corded Reciprocating Saw: Best for light corded cutting

6Amp 2800RPM Corded Reciprocating Saw, corded reciprocating saws
8.0/10Our score
  • 6 amp motor
  • 0–2,800 SPM
  • 20 mm stroke length
  • Pivoting shoe with ±15-degree movement

The G LAXIA offers a smaller 6 amp corded setup with variable speed control, a pivoting shoe and several included blades.

See it on Amazon

Pros

  • 5 blades included
  • Variable speed control
  • Lightweight design

Cons

  • Lowest current rating here
  • 6 in blade length

The G LAXIA 6Amp 2800RPM Corded Reciprocating Saw is the light corded option for smaller cutting jobs. Its 6 amp motor reaches 0 to 2,800 SPM, and its 20 mm stroke length is paired with a stated maximum wood cutting depth of 2-2/5 in.

The pivoting shoe moves by 15 degrees around objects, and the quick-change chuck allows tool-less blade changes. Shoe movement helps keep support when the cut curves around a pipe or branch.

Its large trigger uses variable speed control for smoother acceleration from 0 to the maximum speed. A smooth ramp helps the blade start without jumping.

The package includes one saw, one hex key, three metal blades, two wood blades and one manual. Having both blade types in the box makes first jobs easier to plan.

The 6 in blade length and lower amp rating make it better suited to lighter work than the 12 and 13 amp models. Choose it when included blades and a smaller corded setup matter more than maximum motor capacity.

The smaller stroke length and motor suit Trimming, light demolition and household repairs. For thick or repeated heavy cutting, a larger motor will carry the load with less effort.

For setup, pick the blade for the material and seat it fully in the chuck. Keep the shoe in contact and let the blade track the line.

For care, unplug before blade changes and clear dust from the housing. Keep the hex key and spare blades together in storage.

6Amp 2800RPM Corded Reciprocating SawCheck it on Amazon

How to choose a corded reciprocating saw

Choose the motor rating first if you expect frequent demolition or thick materials. The SKIL 13 Amp and DEWALT 12 Amp provide more current capacity than the 7.5 amp, 6 amp and cordless alternatives listed here.

Amp rating is not the whole story, but it is a useful starting point for demanding cuts. Speed control matters when a cut needs a slower start.

Variable speed triggers appear on every pick in this roundup. The stated maximum ranges from 2,800 SPM on the G LAXIA to 3,500 RPM on the SEESII, and a slower start helps the blade bite and follow a line.

Stroke length describes blade travel, with a 1-1/8 in stroke on several higher-scoring models. The G LAXIA uses a 20 mm stroke and the SEESII uses a 15 mm stroke, with longer travel moving more material per cycle.

Blade clamp style affects setup time, since tool-free clamps swap a dull blade fast and multi position clamps add flush cutting options. The shoe affects support, with a pivoting shoe keeping contact as the angle changes.

Weight affects fatigue and reach, with a 9 lb saw feeling steady on a bench and a 4 lb saw easier to lift overhead. Included accessories affect the first job, since blades, chargers and batteries can turn a bare tool into a ready kit.

Match the tool to the outlet situation, with corded saws keeping power continuous near a receptacle. Match the blade to the material next, since tooth pattern and blade length do more for cut quality than speed alone.

What blade clamp and shoe features do you need?

A tool-free blade clamp saves time when changing from a wood blade to a metal blade. The DEWALT DCS380B and DWE305 add 4-position clamps, which are especially useful when flush cutting or approaching a material from an awkward angle.

A pivoting shoe helps keep the saw supported against the work. The G LAXIA adds ±15-degree shoe movement, while the DEWALT DCS380B and BLACK+DECKER models use pivoting shoes for control during turns and angle changes.

Choose blades by material and tooth pattern. The G LAXIA includes separate metal and wood blades, and the SEESII includes blades for wood and metal.

Never assume the blade in the tool is right for every cut.

For a broader explanation of tool roles, read What Is the Difference Between a Jigsaw and a Reciprocating Saw?. If your work is mostly careful wood cutting, compare the best hand saw for woodworking.

How do you use and care for a corded reciprocating saw?

Start by unplugging the saw before installing or removing a blade. Choose a blade for the material, seat it fully in the clamp and confirm the shoe can rest against the work.

Check that the blade teeth face the right way for the cut, since a blade seated at the wrong angle will drag. Use the variable speed trigger to begin slowly, then increase speed as the blade tracks the cut.

Keep both hands positioned securely and keep the cord away from the blade path. Let the blade do the cutting instead of forcing the housing forward, since a slow start helps it find its line.

A pivoting shoe can improve support as the cut changes angle, so keep the shoe flat where you can. When the blade becomes dull, replace it rather than pushing harder, because extra force reduces control and can make the cut wander.

Watch for binding in thick material, easing off the trigger if the blade stalls. Keep your body clear of the blade path and plan the exit of the cut so the blade does not swing free toward your hands.

After use, unplug a corded saw and clear dust from the outside. Keep blades, manuals and included accessories together, and check the clamp and shoe before the next job.

Inspect the cord for damage before storage and lay it loose instead of coiling it tight. Store blades flat and dry so teeth stay sharp.

Which corded reciprocating saw should you buy?

Choose the SKIL 13 Amp Corded Reciprocating Saw if you want the highest motor rating and vibration suppression for demanding continuous cutting. Pick the DEWALT DWE305 if a 4-position blade clamp is more useful than the SKIL higher amp rating.

The SKIL 9206-02 and CRAFTSMAN CMES300 fit lighter corded work, while the G LAXIA adds several included blades in a smaller 6 amp package. If an outlet is not practical, choose the DEWALT, BLACK+DECKER, SEESII or CRAFTSMAN cordless alternative instead.

Consider the material you cut most often, since wood, metal, plastic and drywall each call for a different blade and pace. Consider the space you work in, since tight corners may favor a compact body while steady bench work can handle more weight.

For a ready kit, the SEESII package stands out with two batteries and six blades. For a bare tool, the DEWALT and CRAFTSMAN cordless models assume you already own a compatible battery.

For simple corded wood work, the CRAFTSMAN CMES300 is an easy starting point with its 7 lb body and variable speed trigger. For flush cuts and awkward angles, the DEWALT DWE305 gives you four clamp positions.

For technique guidance after you choose a tool, follow How to Use a Ryobi Reciprocating Saw. Buy the saw that matches your outlet, your material and your blade plan.

Our top 3 picks at a glance

  1. 1 DEWALT 20V MAX Reciprocating Saw
    Best for cordless flush cutting

    DEWALT 20V MAX Reciprocating Saw

    9.7/10 our score

    See it on Amazon
  2. 2 SKIL 13 Amp Corded Reciprocating Saw
    Best for heavy-duty corded cutting

    SKIL 13 Amp Corded Reciprocating Saw

    9.4/10 our score

    See it on Amazon
  3. 3 BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless
    Best for compact DIY work

    BLACK+DECKER 20V MAX* POWERCONNECT 7/8 in. Cordless

    9.2/10 our score

    See it on Amazon

Frequently asked questions

What is the best corded reciprocating saw for heavy-duty work?

The SKIL 13 Amp Corded Reciprocating Saw is the strongest heavy-duty corded pick here because its 13 amp motor is the highest current rating in the group. Its BUZZKILL Technology is designed to suppress vibration, while the variable speed trigger helps you slow down for controlled cuts.

Are corded reciprocating saws better than cordless models?

Corded reciprocating saws give you continuous power without waiting for batteries to charge. Cordless models are easier to move around a property and work where outlets are inconvenient, but tool-only options need a compatible battery and charger.

What amp rating should a corded reciprocating saw have?

A 12 or 13 amp motor suits demanding cutting better than a 6 or 7.5 amp motor when you want more electrical capacity for heavy work. A lower amp saw can still fit homeowner projects, trimming and lighter cuts when its size and speed match the job.

What does stroke length mean on a reciprocating saw?

Stroke length is how far the blade travels during each reciprocating cycle. The 1-1/8 in stroke on several DEWALT, SKIL and CRAFTSMAN models gives the blade a longer travel than the 20 mm stroke on the G LAXIA, while variable speed still lets you control the cut.

Can a reciprocating saw cut wood and metal?

Yes, when you use a blade intended for the material. The SEESII includes blades for wood and metal, while the G LAXIA includes 3 metal blades and 2 wood blades.

Check the blade type and tooth pattern before cutting.