9 Best Band Saw Blades for Wood (November 2026)
The best wood band saw blades include the LENOX Tools Portable Band Saw Blades for metal cutting, the POWERTEC 93-1/2 Inch Bandsaw Blades Assortment for 14-inch saw versatility, and the AYAO 80 Inch X 3/8 Inch X for general-purpose 12-inch saw work.
On this page (8 sections)
- How we chose band saw blades for wood
- How the top wood band saw blades compare
- Which wood band saw blades fit different jobs?
- How do you choose blade width for straight or curved cuts?
- What tooth pitch works for common woodworking cuts?
- How do you check band saw blade compatibility?
- How should you store or change a band saw blade?
- Which wood band saw blade should you choose?
The best wood band saw blades depend on your saw’s required length and the work: choose a narrower blade for curves, and a wider blade with fewer teeth per inch for straight cuts and resawing. Our top woodworking pick is the POWERTEC 93-1/2-inch assortment because its three blades cover several jobs on compatible saws.
A blade that fits your machine is the first requirement. Check its manual for blade length and acceptable widths before comparing tooth pitch or material.
Our picks at a glance
-
1
-
2
Best for 14-inch saw versatilityPOWERTEC 93-1/2 Inch Bandsaw Blades Assortment
9.6/10 our score
See it on Amazon -
3
- 4
Check itPOWERTEC 80 Inch Bandsaw Blades Assortment
Best for 80-inch saws with varied jobs - 5
Check itAYAO Wood Band Saw Blades 93-1/2-Inch X
Best for 14-inch saws and curve work - 6
Check itTimber Wolf Bandsaw Blade 1/2" X 93-1/2"
Best for thick-stock resawing - 7
Best for fine curves on 80-inch sawsCheck it - 8
Check itWood-Mizer 144" Sawmill Bandsaw Blades 5-Pack
Best for portable sawmills - 9
Check itFOXBC 93-1/2 Inch x 3/4 Inch x
Best for wide-blade straight cuts
How we chose band saw blades for wood
We compared the listed blade lengths, widths, tooth pitches, materials and stated saw compatibility, then weighed how well each option fits common woodworking jobs. Our score weighs specs, features and buyer feedback against what you’re shopping for.
Woodworking blades in this roundup cover 80-inch and 93-1/2-inch shop saws, plus a separate 144-inch sawmill option. The Lenox portable blade is included for completeness, but its stated compatible material is metal, so it is not a wood-cutting recommendation.
Use the saw’s manual to confirm length and width limits. Then choose a tooth pitch and blade width for the cut you make most often.
How the top wood band saw blades compare
The best blade for straight cuts is usually wider than the blade you’d choose for tight curves. The table compares the main dimensions and intended jobs so you can narrow the field before checking compatibility.
| Product | Best for | Length | Width | Tooth pitch | Our score |
|---|---|---|---|---|---|
| LENOX Tools Portable Band Saw Blades | metal cutting | 44-7/8 in | 1/2 in | 14 TPI | 9.7 |
| POWERTEC 93-1/2 Inch Bandsaw Blades Assortment | 14-inch saw versatility | 93-1/2 in | 6 and 14 TPI | 9.6 | |
| AYAO 80 Inch X 3/8 Inch X | general-purpose 12-inch saw work | 80 in | 3/8 in | 6 TPI | 9.5 |
| POWERTEC 80 Inch Bandsaw Blades Assortment | 80-inch saws with varied jobs | 80 in | 4, 6 and 14 TPI | 9.3 | |
| AYAO Wood Band Saw Blades 93-1/2-Inch X | 14-inch saws and curve work | 93-1/2 in | 3/8 in | 6 TPI | 9.0 |
| Timber Wolf Bandsaw Blade 1/2" X 93-1/2" | thick-stock resawing | 93-1/2 in | 1/2 in | 4 TPI | 8.8 |
| FOXBC 80 Inch x 1/4 Inch x | fine curves on 80-inch saws | 80 in | 1/4 in | 14 TPI | 8.6 |
| Wood-Mizer 144" Sawmill Bandsaw Blades 5-Pack | portable sawmills | 144 in | 1-1/4 in | 8.3 | |
| FOXBC 93-1/2 Inch x 3/4 Inch x | wide-blade straight cuts | 93-1/2 in | 3/4 in | 4 TPI | 8.1 |
Which wood band saw blades fit different jobs?
Match the blade to the cut and the machine. These picks serve different lengths, widths and woodworking tasks, so there is no single blade here that fits every saw or cut.
LENOX Tools Portable Band Saw Blades: Best for metal cutting
- 44-7/8 in long
- 1/2 in wide
- 14 TPI
- Bi-metal construction
A portable saw replacement set with bi-metal construction and 14 TPI. Its stated material compatibility is metal, so it is not the wood-focused pick in this roundup.
Pros
- Bi-metal blades are described as bend-resistant
- High-speed steel teeth
- Pack of 5
Cons
- Stated compatible material is metal
- Length suits only saws designed for 44-7/8 in blades
The LENOX Tools Portable Band Saw Blades are a metal-cutting option in a wood-focused roundup, not a substitute for a woodworking blade. Their 44-7/8-inch length, 1/2-inch width and 14 TPI make them relevant only if your portable bandsaw is designed for those dimensions and you need to cut metal.
The bi-metal construction is described as bend-resistant, and the high-speed steel teeth are intended to provide a durable cutting edge. The five-pack gives you multiple replacements for a compatible portable saw.
For woodworking, choose one of the blades below with a stated wood use and a length that matches your machine. If you need help matching a blade to its tool and material, read how to match a saw blade to the tool and material.
POWERTEC 93-1/2 Inch Bandsaw Blades Assortment: Best for 14-inch saw versatility
- 93-1/2 in length
- Three widths and tooth counts
- Includes 1/8 in scroll blade
- Carbon steel
Three blades cover resawing, rip and cross cuts, curves and scroll work. Confirm that your saw uses 93-1/2 in blades before choosing the set.
Pros
- Three blades for different jobs
- Includes a narrow scroll blade
- Carbon steel construction
Cons
- Does not include a 3/8 in blade
- Length must match the saw
The POWERTEC 93-1/2-inch assortment is the most flexible pick here for compatible shop saws. It includes a 1/2-inch, 6-TPI blade for resawing and general cuts, a 1/4-inch, 6-TPI blade, and a narrow 1/8-inch, 14-TPI blade for scroll work and tight curves.
For a dedicated tool for intricate wood patterns, compare scroll saw blades for wood.
That range makes it a practical set if you change between broad cuts and detailed shapes. POWERTEC says the carbon steel blades are intended for wood, plastic and non-ferrous metals.
Confirm that your saw takes 93-1/2-inch blades before buying. For a closer look at that machine size, see our guide to the best blade for a 14-inch band saw.
AYAO 80 Inch X 3/8 Inch X: Best for general-purpose 12-inch saw work
- 80 in length
- 3/8 in width
- 6 TPI
- Two-blade pack
This carbon steel pair is intended for wood and general-purpose cutting on compatible saws. AYAO identifies Craftsman 12-inch saws that use 80-inch blades as a fit.
Pros
- Two blades in the pack
- 6 TPI for general wood cutting
- Raker-set teeth
Cons
- Only fits saws designed for 80 in blades
- Not a multi-width assortment
AYAO’s 80-inch, 3/8-inch blade is a straightforward general-purpose choice for a compatible 12-inch Craftsman saw. The 6-TPI raker-set teeth are intended for wood and general-purpose cutting, and the pack includes two blades.
A 3/8-inch width offers a middle ground for general work. It is narrower than a dedicated resaw blade, which helps when the cut path turns, but it will not follow the tightest curves as easily as a narrow scroll blade.
AYAO also describes its 80-inch blades as suitable for saws using that length. Read the manual and check the blade width limits before ordering.
POWERTEC 80 Inch Bandsaw Blades Assortment: Best for 80-inch saws with varied jobs
- 80 in length
- Three blade widths
- Includes 1/8 in scroll blade
- Carbon steel
The set pairs a narrow scroll blade with wider options for wood cutting. POWERTEC identifies it for 80-inch saws, including compatible Craftsman 12-inch models.
Pros
- Three blade widths and tooth pitches
- Includes a scroll-cutting blade
- Carbon steel construction
Cons
- Confirm exact saw length before ordering
- The set does not include a 1/2 in blade
This POWERTEC assortment covers three jobs on saws that use 80-inch blades. Its pack has a 1/4-inch, 6-TPI blade, a 1/8-inch, 14-TPI scroll blade, and a 3/8-inch, 4-TPI blade for more aggressive cutting.
The three widths and tooth pitches give you options for curves, general cuts and deeper stock. POWERTEC identifies the set for woodworking on compatible Craftsman 12-inch saws, and says the blades are made from high-carbon steel.
Check the saw’s manual to verify the 80-inch length. If your cuts involve hardwood, compare the options in our guide to the best band saw blades for hardwood.
AYAO Wood Band Saw Blades 93-1/2-Inch X: Best for 14-inch saws and curve work
- 93-1/2 in length
- 3/8 in width
- 6 TPI
- Two-blade pack
A pair of 3/8-inch blades for compatible 14-inch saws. The width and 6-TPI tooth pitch suit general wood cutting where you want a middle ground between straight and curved work.
Pros
- Two blades in the pack
- Fits many saws requiring 93-1/2 in blades
- Raker-set teeth
Cons
- Check the saw's required length
- One width and tooth pitch
AYAO’s 93-1/2-inch pair is a general-purpose wood option for compatible 14-inch saws. Each blade is 3/8 inch wide with 6 TPI, a combination suited to everyday straight and curved work where the curve is not extremely tight.
AYAO names several compatible saw brands and models that take 93-1/2-inch blades, including Delta, Jet, Rikon and Grizzly. Still, confirm the exact length your machine needs, since saw size alone does not guarantee compatibility.
Choose this pair if you want a middle-width blade for regular cutting without buying a multi-width assortment. For wood species and heavier stock, see our guide to best band saw blades for hardwood.
Timber Wolf Bandsaw Blade 1/2" X 93-1/2": Best for thick-stock resawing
- 1/2 in width
- 93-1/2 in length
- 4 TPI
- Thin kerf
The 1/2-inch width and 4-TPI tooth pitch suit thick-stock resawing. Timber Wolf describes it as a thin-kerf blade designed to run under low tension.
Pros
- 4 TPI for thick stock
- Designed for resawing
- Low-tension design
Cons
- Single blade
- Confirm saw length and tension guidance
The Timber Wolf blade is a focused option for resawing thick stock. Its 1/2-inch width and 4-TPI tooth pitch favor a straight cut through deeper material, and the brand describes the blade as thin kerf and designed to run under low tension.
It measures 93-1/2 inches long, so it suits only saws built for that blade length. Follow the saw maker’s tension guidance and confirm compatibility before installation.
A broad blade like this is less suited to tight curves than a narrower option. If you are comparing widths and tooth counts, our guide to how tooth count affects cut quality explains the tradeoffs.
FOXBC 80 Inch x 1/4 Inch x: Best for fine curves on 80-inch saws
- 80 in length
- 1/4 in width
- 14 TPI
- Two-blade pack
This 14-TPI pair is described for fine, intricate cuts in hardwood and softwood. Check the manual because it is made for compatible 80-inch saws, including specified Craftsman models.
Pros
- 14 TPI for finer cuts
- Two blades in the pack
- Precision-sharpened teeth
Cons
- Only fits saws designed for 80 in blades
- Narrower width favors curves over resawing
FOXBC’s 80-inch, 1/4-inch blade has 14 TPI and is described for fine, intricate cuts in hardwood and softwood. That narrow width and higher tooth count make it a better match for curves and cleaner cross-grain cuts than thick-stock resawing.
The two-pack is intended for compatible Sears Craftsman 12-inch saws that use 80-inch blades. FOXBC also identifies the blade for plastic and non-ferrous metals, but confirm that your saw and blade are appropriate for the material.
If you need a tighter curve than a 1/4-inch blade can follow, check your saw’s width limits and consider a narrower scroll blade.
Wood-Mizer 144" Sawmill Bandsaw Blades 5-Pack: Best for portable sawmills
- 144 in length
- 1-1/4 in width
- 5-pack
- 10-degree all-purpose hook angle
A sawmill blade set for select portable sawmills, including certain Wood-Mizer, Harbor Freight and Norwood models. Its 144-inch length and 1-1/4-inch width are for sawmill use, not typical shop bandsaws.
Pros
- Five blades in the pack
- All-purpose hook angle for mixed wood species
- Can be resharpened with a CBN grinding wheel
Cons
- Fits only select portable sawmills
- Not a typical stationary shop bandsaw blade
Wood-Mizer’s 144-inch blade set is for select portable sawmills, not standard shop bandsaws. It includes five blades, each 1-1/4 inches wide, with a 10-degree all-purpose hook angle for sawing mixed wood species.
The stated compatible machines include select Wood-Mizer, Harbor Freight, Norwood, Timbery, TMG Industrial and Woodland Mills portable sawmills. Check the sawmill model and required blade dimensions carefully before buying.
Wood-Mizer says the DoubleHard blades can be resharpened with a CBN grinding wheel. Choose this set only if you run a compatible sawmill and need sawmill-length blades.
FOXBC 93-1/2 Inch x 3/4 Inch x: Best for wide-blade straight cuts
- 93-1/2 in length
- 3/4 in width
- 4 TPI
- High-carbon steel
The wide 3/4-inch blade and 4-TPI teeth are suited to straight cuts and resaw work on compatible 14-inch saws. Check the manual for the required blade length.
Pros
- Wide blade for straight cuts and resaw work
- 4 TPI
- Fits many 14-inch saw models
Cons
- Wide blade is less suited to tight curves
- Confirm length and saw compatibility
FOXBC’s 93-1/2-inch blade is the widest shop bandsaw option here. Its 3/4-inch width and 4 TPI suit straight cuts and resawing on compatible 14-inch saws, while the width limits its ability to follow tight curves.
FOXBC names several compatible saw brands, including Delta, Jet, Rikon, Grizzly and Craftsman models requiring 93-1/2-inch blades. The blade is made from high-carbon steel and is described for hard or soft wood, plastic, mild steel and non-ferrous metal.
Check the manual for both blade length and maximum width. If you want to compare options aimed specifically at resawing, see our best band saw blades for resawing.
How do you choose blade width for straight or curved cuts?
Choose a wider band saw blade when straight cuts and resawing matter most, and a narrower blade when you need tighter curves. Your saw’s manual sets the range of widths it can use, so verify that before choosing a blade by its cut radius.
A 1/8-inch blade can manage tighter turns than a 3/8-inch or 1/2-inch blade. Wider blades are easier to steer through straight cuts, but they need a larger curve radius.
For occasional work in both styles, an assortment can make sense if each included blade matches your saw. The POWERTEC sets above provide different widths and tooth pitches for compatible 80-inch or 93-1/2-inch machines.
What tooth pitch works for common woodworking cuts?
Lower TPI blades are suited to deeper stock and cuts along the grain, while higher TPI blades can leave a smoother cross-grain finish. A useful starting point is 4 to 6 TPI for more aggressive cutting and 14 TPI for finer work, provided the stock thickness leaves enough teeth in contact.
Tooth pitch is one part of cut quality. Tooth shape and set, blade width, feed rate and material also matter, so choose from the saw’s manual and the workpiece rather than TPI alone.
A narrow blade with 14 TPI can work well for fine curves, but it is not the best tool for fast resawing. For a broader explanation, read how saw blade tooth count affects cut quality.
How do you check band saw blade compatibility?
Check blade length first, then width and the saw’s intended material. A 12-inch or 14-inch label alone does not confirm the required blade length, as models in the same size class can differ.
The options here include 80-inch and 93-1/2-inch shop blades, plus a 144-inch sawmill blade. Confirm the number in your manual and verify that the saw accepts the blade width and tooth style you plan to use.
If you need a nonstandard length, explore custom band saw blades. For setup issues that affect tracking, read our guide to the best band saw blade guides.
How should you store or change a band saw blade?
Follow the saw maker’s instructions when changing a blade, and wear eye protection because a coiled blade can spring open. Store blades dry and protected from damage to the teeth, weld and cutting edge.
A coil can save space, but band saw blades hold stored tension. Use a controlled technique and keep other people clear when handling one; our instructions for how to coil a band saw blade cover the process.
The blade is only one part of the cutting setup. Worn or damaged tires can affect tracking, so compare the best rubber band saw tires and options for 14-inch band saw tires if your machine needs tire service.
Which wood band saw blade should you choose?
Choose the POWERTEC 93-1/2-inch assortment if your compatible saw needs blades for several jobs, or the AYAO 80-inch 3/8-inch blade for general cutting on a compatible saw. Pick a wide 4-TPI option for resawing and straight cuts, and a narrow, higher-TPI blade for fine curves.
The best wood band saw blades are the ones that fit your machine and match your most common cut. Confirm the length and width in your manual, then choose between a single-purpose blade and an assortment.
Our top 3 picks at a glance
-
1
-
2
Best for 14-inch saw versatilityPOWERTEC 93-1/2 Inch Bandsaw Blades Assortment
9.6/10 our score
See it on Amazon -
3
Frequently asked questions
What is the best band saw blade for wood?
The best blade depends on your saw's required length and the cut. A 3/8-inch blade with 6 TPI is a useful general-purpose choice, while a wider, lower-TPI blade suits straight cuts and resawing.
A narrower blade can turn tighter curves.
How do I choose a blade width for straight and curved cuts?
A wider blade is easier to keep on a straight path and is commonly chosen for resaw work. A narrower blade can follow tighter curves.
Check your saw's manual for the blade widths it can use, then choose based on your cut radius and stock.
What does TPI mean on a band saw blade?
TPI means teeth per inch. Lower TPI gives more space between teeth and suits deeper stock or cuts along the grain, while higher TPI can leave a smoother cut across the grain.
Match the pitch to the stock thickness and finish you want.
How do I know which blade length fits my band saw?
Use the length specified in your saw's manual or on the machine. Common lengths such as 80 and 93-1/2 inches are not interchangeable.
Also confirm the blade width range your saw accepts before buying.
Can one blade handle curves and resawing?
A middle-width blade can handle a range of general woodworking cuts, but it involves a tradeoff. Narrower blades follow tighter curves, while wider blades are easier to steer straight through resaw cuts.
For frequent work in both styles, an assortment lets you change blades.
About this guide: Our look at wood band saw blades draws on maker specs, materials and what owners report. See how we research.



