How to Choose Scroll Saw Blade Clamps
Choose replacement scroll saw blade clamps to match your saw’s clamp design and the blade end it accepts. Check the owner’s manual or remove the existing clamp and compare its shape, mounting method and dimensions before ordering.
On this page (8 sections)
- How do scroll saw blade clamps hold a blade?
- How can you identify your saw’s clamp style?
- What should you measure before ordering a replacement?
- Do pinned and plain-end clamps work the same way?
- Which replacement blades pair with common clamp setups?
- What signs mean a clamp may need replacement?
- What should you check after installing the clamp?
- How do you choose the right scroll saw blade holder?
Choose replacement scroll saw blade clamps by matching the clamp design on your saw and the blade-end style it holds. A clamp that looks close may still have a different mounting method or dimensions, so check the manual or compare it with the original part.
First identify whether your saw takes pinned blades or plain-end blades. Then note how the clamp attaches, how its fastener works and what measurements the manufacturer specifies.
How do scroll saw blade clamps hold a blade?
Scroll saw blade clamps hold the blade at the saw’s upper and lower arms so the blade stays in place during cutting. The clamp must fit the saw and the blade end; clamp shape alone does not confirm compatibility.
A pinned blade has small cross pins near both ends, and the saw’s mounts must accept those pins. A plain-end blade has no pins and is held by a clamp or screw designed for that end.
Some saws use separate clamp pieces; others have a built-in holder or a different fastening arrangement. Check the instructions for your model rather than assuming every scroll saw uses the same scroll saw blade holder.
How can you identify your saw’s clamp style?
Identify the clamp from the saw’s manual, model information and existing hardware. Use the original clamp as your reference if you can remove it safely according to the manual.
Look for the following:
- Blade end: pinned or plain end
- Clamp shape: the overall form and how it sits on the arm
- Mounting method: screw, bolt or another specified fastener
- Dimensions: measurements given by the saw maker or shown in the manual
- Position: whether the part is for the upper or lower arm
Do not rely on a general description such as “scroll saw blade holder.” A replacement may use that phrase while fitting a different saw or blade style.
If the manual is unavailable, record the saw’s make and model, take a clear picture of the old clamp and measure it. Confirm the replacement against those details before buying.
What should you measure before ordering a replacement?
Measure the original clamp and its mounting points, then compare those measurements with the replacement’s stated fit information. Include the fastener and the space where the clamp meets the saw arm.
A useful checklist is:
- Write down the saw’s make and model.
- Check the manual for the accepted blade ends and replacement part details.
- Remove the clamp only if the manual explains how to do so safely.
- Note its length, width, thickness and hole or fastener position.
- Compare the replacement part’s shape and measurements with the original.
Measurements help narrow the choices, but they do not replace model compatibility information. If a measurement or mount detail is missing, ask the manufacturer or seller to confirm the match before ordering.
Blade length also matters because the saw must tension the blade correctly. See our guide to how long scroll saw blades are before choosing a blade to pair with a replacement clamp.
Do pinned and plain-end clamps work the same way?
Pinned and plain-end clamps hold different blade ends, so choose the mount type your saw requires. Do not assume a clamp can convert one blade style to the other.
Pinned blades have a cross pin at each end that seats into matching mounts. This style can simplify blade changes on saws designed for pinned blades, but it is not a fit for every machine.
Plain-end blades have no cross pins. The saw secures each end with a clamp or screw, which is why the clamp’s grip and mounting design matter.
Some saws support only one blade style, while others can use different styles with the right hardware. Follow the manual’s instructions for your exact model and avoid modifying blades or clamps to make them fit.
For a broader look at blade shapes and mounting styles, read our guide to scroll saw blade types.
Which replacement blades pair with common clamp setups?
Choose blades only after confirming the clamp and saw support the same end style. A blade’s length and end design need to match the machine, even when the blade’s tooth pattern suits your project.

A pinned 3 in blade set for machines that require 3 in pin-end blades with 2-3/4 in between pins.
See it on AmazonThe FOXBC set is intended for machines that require 3 in pin-end blades, with 2-3/4 in between pins. Its product details name several hobby saws and say the blades are for hard or soft wood, plastic, copper and other soft metals.

Olson’s 5 in reverse-tooth blades are an option when your saw accepts that blade length and end style.
See it on AmazonOlson’s FR49202 assortment is described as 5 in reverse-tooth scroll saw blades. Confirm the end style and saw compatibility before selecting it, since the available product details do not specify a clamp type.

Olson’s PG49802 is a 5 in plain-end blade for a scroll saw that accepts pinless blades.
See it on AmazonOlson’s PG49802 is described as a plain-end, 5 in precision-ground blade, with double teeth for hardwoods. It suits a compatible plain-end setup, not a saw that requires pinned blades.
Blade choice still depends on the material and cut. Compare best scroll saw blades for wood for wood projects and best scroll saw blades for metal for compatible metal-cutting options.
What signs mean a clamp may need replacement?
Replace a clamp if it is cracked, bent, stripped or unable to hold a compatible blade securely. A blade that keeps slipping after correct installation is a reason to stop and inspect the clamp and fastener.
Also check for a fastener that no longer tightens, visible damage around the mounting hole or wear where the blade end sits. A dull or broken blade does not by itself mean the clamp needs replacement.
Follow the saw manual when tightening or replacing a clamp. Do not cut with a loose blade, and do not use extra force if the fastener or clamp does not fit smoothly.
What should you check after installing the clamp?
After installation, confirm that the clamp sits in its intended position and holds the correct blade end as directed by the manual. Check the blade’s alignment and tension before starting a cut.
With the saw unplugged, inspect the upper and lower blade mounts and confirm the blade is seated at both ends. Follow the manufacturer’s tensioning steps, then make a cautious test cut in scrap material if the manual permits.
If the blade twists, slips or moves out of alignment, stop the saw and recheck the blade style, clamp fit and fasteners. Consult the manufacturer if the cause is unclear.
How do you choose the right scroll saw blade holder?
Choose a scroll saw blade holder by matching the part to the saw’s model and blade-end style, then verifying its mount and dimensions. The model number and original hardware are more reliable clues than a generic product name.
Pick a replacement clamp when it matches the saw’s specified part and holds the required blade end. Pick a compatible pinned blade set only for a saw designed for pinned blades, and choose plain-end blades only when the saw’s holder accepts them.
For other saw comparisons, see what separates a bandsaw from a scroll saw, or read how to match a saw blade to its tool and material. For a different blade category, our guides cover the reciprocating saw knife blade and the best reciprocating saw blade for pruning.
Frequently asked questions
Are scroll saw blade clamps universal?
No. Clamp shape, screw size, mounting method and blade-end style can differ by saw.
Check your saw’s manual or compare the existing clamp with the replacement before ordering.
Also confirm whether your machine uses pinned or plain-end blades, since the clamp must hold the blade end securely.
Can I use a pin-end blade in a plain-end scroll saw clamp?
Only if the saw and clamp are designed to accept that blade style. A pin-end blade has cross pins at its ends, while a plain-end blade is held by a clamp or screw.
Follow your saw’s instructions and do not remove pins or alter a blade to force a fit.
How do I know whether my scroll saw uses pinned or plain-end blades?
Check the manual and inspect the blade mounts. A pinned blade has a small cross pin near each end; a plain-end blade has no pins and is secured by the saw’s clamp.
Confirm the accepted blade type at both ends, since some saws require a specific mounting setup.
Should I replace the clamp or the blade?
Replace the blade when it is dull, damaged or the wrong style for the cut, and replace a clamp when it is damaged or no longer holds a compatible blade securely. If the blade slips after you tighten the clamp as instructed, stop and check the fastener, clamp condition and saw manual before cutting.
About this guide: Our look at scroll saw blade clamps and holders draws on maker specs, materials and what owners report. See how we research.



