Buying guide

Which Table Saw Blade Should You Use for Metal?

Updated on · By the Blade & Bench team

Use a metal-cutting blade only when your table saw and the blade manufacturer permit that setup. The wood blades below are not metal-cutting blades, so check the material rating, arbor, diameter and maximum RPM before buying.

On this page (7 sections)
  1. What table saw blade for metal should you use?
  2. Why does metal type change the blade choice?
  3. What saw specifications must you check?
  4. Which products here are suitable for metal?
  5. How should you compare tooth count and kerf?
  6. What should you do before installing a blade?
  7. What is the safest choice for a metal table saw cut?

Use a metal-cutting blade only when your table saw and the blade manufacturer permit that setup. That check matters more than brand, tooth count or price.

It is the line between a planned cut and an unsafe improvisation.

The 3 blades in this guide are wood blades. They are not substitutes for a blade designed and rated for metal.

Their fit, speed rating or carbide teeth do not change that limit.

Metal work places different demands on a saw blade than cutting pine, plywood or hardwood. The material, tooth design, heat, sparks, chips and saw speed all matter.

A blade made for wood can be damaged quickly by metal, and the saw can be pushed beyond its intended use.

That is why material rating comes first. Start with the exact metal you plan to cut.

Then check whether the blade and the saw are both approved for that material and thickness.

Wood is a different job with different needs. Fine finish, general purpose cutting and ripping all call for different tooth counts.

Kerf and tooth shape also affect how clean a wood cut feels.

If you rename a wood blade as a metal blade, you lose that distinction. You may also lose control of the cut.

Metal can catch, heat up or throw chips in ways wood usually does not.

Keep the two categories separate in your buying process. Use wood blades for wood.

Use metal blades only when the full setup is approved for metal.

If you are choosing a blade for wood instead, compare our best table saw blades for woodworking guide. For a dedicated metal option, see the best table saw metal cutting blade roundup.

Those guides help you ask the right questions for each material. They do not make a wood blade suitable for metal.

They keep the choice clear from the start.

Read the saw manual before you buy anything. Read the blade label before you mount it.

If either source limits the setup to wood, respect that limit.

A short pause at this stage saves wasted money and needless risk. It also helps you choose a blade with purpose.

That is the safest way to approach both metal and wood work.

What table saw blade for metal should you use?

The best table saw blade for metal is one specifically marked for the metal you plan to cut and approved for your saw speed and design. Start with the material rating, then verify diameter, arbor and maximum RPM.

Do not choose by tooth count alone. A blade can have carbide teeth, a thin kerf or a matching arbor and still be intended only for wood.

Diameter decides whether the blade can mount in the saw. Arbor size decides whether the center hole fits without modification.

Maximum RPM decides whether saw speed is within the blade limit, and tooth design decides how the blade meets the material.

None of those specs overrides a wood only rating. Before buying, check these points:

  • Metal type: Steel, aluminum and other metals can require different blade designs.
  • Blade diameter: It must match the saw permitted blade size.
  • Arbor size: The center hole must fit the saw without unsafe modification.
  • Maximum RPM: The blade rating must meet or exceed the saw operating speed.
  • Tooth design: Tooth shape, spacing and material affect the cut.
  • Saw approval: Some table saws are designed for wood only.

Use each point as a stop sign. If metal type, diameter, arbor or RPM does not match, stop.

If the saw manual limits the saw to wood, stop.

Set up matters as much as selection. The blade must be mounted in the correct direction, with the guard and required safety parts refitted.

The work must be supported and controlled, with hands clear of the cutting path.

Keep blades clean and dry as the manufacturer directs. Inspect teeth and body before use, and replace a damaged blade.

A metal blade is not automatically correct for every metal. Carbide describes a tooth material, not a full metal approval, so compare the printed material and thickness range with the metal in your hand.

When in doubt, choose another tool made for the job. That keeps the cut controlled and avoids forcing an unsuitable blade into service.

Why does metal type change the blade choice?

Metal type changes the cutting load, heat and chip shape, so a blade designed for one material may not be the right choice for another. Match the blade to the metal first, then match it to the saw.

Which table saw blade for metal suits steel?

A steel-cutting blade must be marked for the steel product and cutting method you plan to use. Steel can create more heat and resistance than common wood stock, so the blade's speed rating and tooth design deserve close attention.

Do not assume that a general-purpose carbide blade will handle steel. The word carbide describes a tooth material, not a complete metal-cutting specification.

Which blade suits aluminum?

Aluminum needs a blade intended for aluminum or nonferrous metal when the setup permits that use. Confirm the blade instructions for the alloy, thickness and required cutting speed.

Keep the work supported and controlled. If the blade or saw instructions exclude aluminum, use another approved tool instead of adapting a wood-cutting setup.

Can one metal blade cut every metal?

No. A general metal blade may cover a stated group of materials, but that does not mean it suits every metal, thickness or saw.

The material range printed for the blade is part of its compatibility.

If you cut several metals, compare each material against the blade's stated use. A dedicated blade can be a better choice than forcing one blade to cover unrelated jobs.

What saw specifications must you check?

Check the saw manual before selecting a metal blade for a table saw. The arbor and diameter are only the first checks, because the saw may limit materials, blade types or operating conditions.

Arbor and diameter

The blade diameter must be one your table saw accepts. The arbor must fit the saw correctly, with no improvised enlargement, reduction or loose mounting.

A 10-inch blade, for example, is not automatically suitable for every 10-inch saw. Confirm the arbor size and the saw's approved blade construction before installation.

RPM rating

The blade's maximum RPM must be compatible with the saw. Never exceed the blade's rated speed.

The products in this guide show why this check matters. The WEN BL1060 and WEN BL1040 are 10-inch blades with 5/8-inch arbors and ratings up to 6000 RPM, but both are identified for wood.

Their speed and fit do not make them metal blades.

Guard, riving knife and dust system

Changing material can affect the way chips, heat and debris leave the cut. Keep the guard and other safety equipment in place when the saw instructions require them.

Do not remove safety parts just to make a blade fit. If the metal-cutting setup conflicts with the saw's guard, riving knife or other approved parts, stop and choose a different method.

For a broader matching process, read How Do You Match a Saw Blade to the Tool and Material?.

Which products here are suitable for metal?

None of these 3 products should be selected as a metal-cutting blade. They are wood blades, but they show useful differences in tooth count, kerf and intended use when you need to switch back to woodworking.

WEN BL1060: fine-finish wood cutting

The WEN BL1060 is a 10-inch, 60-tooth carbide-tipped blade for fine-finish cutting in hard and softwoods. Its 5/8-inch arbor, up to 6000 RPM rating and 1/10-inch kerf suit compatible 10-inch miter saws, jobsite saws and table saws.

Its higher tooth count is aimed at fine-finish wood cuts. The ultra-thin 1/10-inch kerf can reduce the width of material removed, but it does not change the blade's wood-only material rating.

Choose it when your next job involves clean cuts in wood and your saw accepts a 10-inch blade with a 5/8-inch arbor. Do not use its carbide teeth, thin kerf or RPM rating as evidence that it can cut metal.

DEWALT Table Saw Blade: 40-tooth fine-finish wood work

The DEWALT Table Saw Blade is a 10-inch, 40-tooth blade with ultra-sharp carbide for clean cutting in wood. Its optimized tooth geometry is intended to support accuracy, and the package contains 1 saw blade.

Its 40-tooth design sits between a fine-finish blade with more teeth and a general-purpose blade with fewer teeth. DEWALT also states up to 3X life, which is a brand claim rather than a reason to use it on metal.

Choose it for compatible wood-cutting work when you want a 10-inch blade with 40 teeth. If your project is metal, choose a blade whose material rating specifically includes that metal instead.

WEN BL1040: general-purpose wood cutting

The WEN BL1040 is a 10-inch, 40-tooth carbide-tipped blade for general-purpose cutting in hard and softwoods. It has a 5/8-inch arbor, a rating up to 6000 RPM, a 1/10-inch kerf and compatibility with the majority of 10-inch miter saws, jobsite saws and table saws.

The 40-tooth layout gives it a different starting point from the 60-tooth WEN BL1060, which is aimed at fine-finish wood cutting. Both are still wood blades, so neither is a metal blade for a table saw.

Choose the BL1040 when you need a general-purpose wood blade rather than a dedicated fine-finish blade. For portable saw compatibility, compare the best portable table saw blades.

How should you compare tooth count and kerf?

Tooth count and kerf help you compare blades within the same material category, but they do not replace the material rating. For metal, choose an approved metal blade first; use tooth count and kerf only after compatibility is confirmed.

Tooth count tells you how many teeth sit around the rim. It does not tell you what material the blade is approved to cut.

A higher tooth count often points toward a smoother finish in wood, while a lower tooth count can suit faster general purpose cuts. More teeth can mean more contact with the material in a short span, and fewer teeth can mean more space for chips to clear.

The WEN BL1060 has 60 teeth, while the DEWALT blade and WEN BL1040 each have 40. That gap helps you compare wood blades for different wood tasks, but it does not make any of them a metal blade.

Kerf describes the width of the cut. Both WEN products here list a 1/10-inch kerf, or 2.4 mm, so a thin kerf removes less material from the work.

That can matter for yield and for fit in wood projects. It can also affect how the saw motor works in the cut, but thin is not a safety approval for another material.

For daily use, ask what finish you need in wood. Fine finish work may suit a higher tooth count, general purpose work may suit a middle count, and ripping work often follows its own guidance.

The WEN blades list up to 6000 RPM and a 5/8-inch arbor. Those specs help with fit for compatible wood setups, but they still do not change the wood rating.

Mount the blade in the correct direction and refit the guard. Keep the blade clean and dry, inspect it for damage, and replace it when teeth or body show wear or harm.

If your main work is ripping wood, see the best table saw blade for ripping guide. For angled wood cuts, the best miter saw blades guide covers a different saw use.

First confirm material and saw approval, then compare finish, kerf and tooth count for the job in hand. That order keeps a wood comparison useful without turning it into a metal claim.

What should you do before installing a blade?

Read the saw and blade instructions, unplug the saw, confirm the blade direction and verify the mounting parts before installation. Never install a blade simply because its diameter and arbor appear to fit.

Use this checklist:

  1. Confirm that the blade is rated for the exact material.
  2. Confirm the diameter and arbor match the saw.
  3. Check that the saw speed does not exceed the blade rating.
  4. Inspect the blade for damage before mounting it.
  5. Install it in the correct rotation.
  6. Refit the guard and required safety parts.
  7. Support the work and keep your hands clear of the cutting path.
  8. Make a controlled test cut only when the full setup is approved.

Keep blades clean and dry according to the manufacturer's care instructions. Replace a blade when its teeth or body show damage, rather than trying to make an unsuitable blade work longer.

For brand-specific context on wood blades, read are diablo saw blades any good. That discussion still does not override the material rating for your chosen blade.

What is the safest choice for a metal table saw cut?

The safest choice is an approved metal-cutting setup that matches the metal, blade, saw speed and saw design. If the table saw manual does not permit the work, use a tool and blade combination intended for that material.

Safety is a match, not a single part. The metal must match the blade rating.

The blade must match the saw in diameter, arbor and speed.

The saw must also permit the material and method. If one link in that chain is missing, the setup is not approved.

Do not try to close the gap with a wood blade.

Think about trade offs in a plain way. A dedicated metal setup may ask for a different tool.

That can feel like extra work at first. It is often the most direct route to a controlled cut.

A wood blade may seem ready because it fits. Fit alone is not approval.

Carbide teeth alone are not approval either.

For woodworking, the choice is clearer. Pick a blade whose tooth count and rating suit the wood task.

Mount it correctly, keep the guard in place and support the work well.

For woodworking, pick the WEN BL1060 for fine-finish cuts, the DEWALT blade for its 40-tooth fine-finish design, or the WEN BL1040 for general-purpose wood cutting. Each has a place in wood use.

None of those picks covers metal. That limit is not a flaw in the blades.

It is simply the category they were made for.

For a table saw blade for metal, begin with the metal rating and permitted saw specifications, not the tooth count alone.

Check the label for the exact material and thickness. Check the saw manual for permitted materials and speed.

Check diameter, arbor and RPM before you mount anything.

Then confirm direction, guard and support. Make a test cut only when the full setup is approved.

Keep the blade clean and dry, and replace it if it shows damage.

That order keeps the decision honest. It also keeps metal work and wood work in their proper lanes.

The safest cut starts with approval, not with fit.

Frequently asked questions

Can you use a table saw blade for metal?

You can use a table saw blade for metal only when the saw, blade and material setup are specifically approved for that use. A wood blade is not automatically suitable for metal, even when its diameter and arbor fit.

Check the saw manual and blade instructions before cutting.

What type of blade cuts metal on a table saw?

A metal-cutting blade matched to the specific metal and saw is the right starting point. The choice depends on the material, blade diameter, arbor, tooth design, RPM limit and whether the saw is approved for the job.

Do not substitute a wood blade because it fits the arbor.

Can a carbide table saw blade cut metal?

Carbide teeth alone do not make a blade suitable for metal. The blade must also be designed and rated for the metal, saw speed and cutting method.

The WEN blades here have carbide-tipped teeth but are identified for wood, so they should not be treated as metal-cutting blades.

What should you check before buying a metal blade for a table saw?

Check the metal type, blade diameter, arbor size, maximum RPM, tooth design and the table saw's permitted materials. Also confirm that the blade is intended for the cutting direction and thickness you plan to use.

A matching arbor does not prove that the full setup is safe.