Best picks

Best 14-Inch Band Saws for Woodworking: Top 9 Picks (November 2026)

Updated on · By the Blade & Bench team

The best 14-inch band saws for woodworking include the SKIL 2.8 Amp 9 In. 2-Speed Benchtop for compact furniture shops, the DEWALT 20V MAX Band Saw for portable deep cuts, and the POWERTEC 93-1/2 Inch Bandsaw Blades Assortment for blade flexibility.

On this page (3 sections)
  1. The best 14-inch band saws for woodworking
  2. What should you look for in a 14-inch band saw?
  3. Which 14-inch band saw should you choose?

The best 14 inch band saws for woodworking range from compact benchtop machines to full-size saws built for deep resawing. The JET 14-inch SFX is the top choice for furniture work because its 13-inch resaw capacity, 1.75 HP motor and large cast-iron table suit thick stock.

A 14-inch saw is a major step up from a 9-inch benchtop model, but size alone does not decide the right pick. Think about your largest workpiece, available floor space, blade length and whether you need a stand, fence or dust connection in the box.

Blade length is easy to overlook. The JET SFX uses a 116-inch loop, the enclosed JET uses 93 1/2 inches, and the 9-inch benchtop models use 59 1/2 inches.

A blade made for one loop will not fit a saw built for another length. Confirm the size before you order spares or plan work around a replacement.

Resaw capacity sets a clear boundary between these machines. The JET SFX cuts 13 inches tall in one pass, while the enclosed JET cuts 6 inches out of the box and up to 12 inches with its optional riser block.

Motor size should be read with that capacity in mind. A 1.75 HP motor in a floor-standing saw serves a different job from a 2.8 amp motor in a benchtop saw.

Table space also changes daily use. The JET SFX has a 360-square-inch cast-iron table, while the WEN and Woodskil benchtop tables are around 12 inches across.

Smaller tables suit small furniture parts, trim and curved work. Larger tables support tall or wide stock before and after the blade for more controlled feeding.

Floor space is the trade-off that comes with that support. The JET SFX weighs 272 pounds and measures 75.5 by 27 by 37 inches, so it needs a fixed place in the shop.

A benchtop saw suits a tighter room or a mixed-use bench. Its smaller frame is easier to place, but its cutting depth and throat limit the stock it can handle.

Portable and accessory picks fill other gaps. The DEWALT is a 12.4-pound portable saw, while POWERTEC blades and the Carter guide set are for compatible existing saws.

Use the portable saw away from a fixed bench. Use a blade set or guide upgrade when your current saw already has the frame and power for the job.

If you are still learning the basics, start with what a band saw is used for in woodworking. For a broader starting point, our guide to the best band saw for woodworking covers general shop choices.

Match the saw to your most common cut first. Then check blade length, table tilt, dust port size and included parts before you order.

Care starts with set-up. Set blade tension and tracking to the maker instructions, keep the table clear, and connect dust collection where the saw allows it.

Our picks at a glance

  1. 1 SKIL 2.8 Amp 9 In. 2-Speed Benchtop
    Best for compact furniture shops

    SKIL 2.8 Amp 9 In. 2-Speed Benchtop

    9.7/10 our score

    See it on Amazon
  2. 2 DEWALT 20V MAX Band Saw
    Best for portable deep cuts

    DEWALT 20V MAX Band Saw

    9.6/10 our score

    See it on Amazon
  3. 3 POWERTEC 93-1/2 Inch Bandsaw Blades Assortment
    Best for blade flexibility

    POWERTEC 93-1/2 Inch Bandsaw Blades Assortment

    9.6/10 our score

    See it on Amazon
  1. 4WEN 9-Inch Band Saw

    WEN 9-Inch Band Saw

    Best for a complete benchtop setup
    Check it
  2. 5Woodskil 9-Inch Band Saw

    Woodskil 9-Inch Band Saw

    Best for angled benchtop cuts
    Check it
  3. 6JET 14" Woodworking Band Saw

    JET 14" Woodworking Band Saw

    Best for deep resawing
    Check it
  4. 7QD-KYOHO Band Saw

    QD-KYOHO Band Saw

    Best for dual-speed full-size work
    Check it
  5. 8Carter Products DEL14 Band Saw Guide Set

    Carter Products DEL14 Band Saw Guide Set

    Best for Delta guide upgrades
    Check it
  6. 9JET 14" Woodworking Band Saw with Enclosed

    JET 14" Woodworking Band Saw with Enclosed

    Best for an enclosed cabinet stand
    Check it

The best 14-inch band saws for woodworking

The best choice depends on the cut you make most often. Choose the SKIL for a compact shop, the JET SFX for deep furniture stock, or the enclosed JET for a cabinet stand and included blade.

Our score weighs specifications, useful features and buyer feedback against the needs of someone shopping for a woodworking band saw. We checked the stated capacities, blade systems, table features, included parts and workshop trade-offs.

ProductBest forBlade sizeMotorWork surfaceOur score
SKIL 2.8 Amp 9 In. 2-Speed Benchtopcompact furniture shops9 inches2.8 amp induction motorSteel base with adjustable table9.7
DEWALT 20V MAX Band Sawportable deep cuts9.6
POWERTEC 93-1/2 Inch Bandsaw Blades Assortmentblade flexibility9.6
WEN 9-Inch Band Sawa complete benchtop setup9.6
Woodskil 9-Inch Band Sawangled benchtop cuts9.4
JET 14" Woodworking Band Sawdeep resawing9.2
QD-KYOHO Band Sawdual-speed full-size work8.7
Carter Products DEL14 Band Saw Guide SetDelta guide upgrades8.3
JET 14" Woodworking Band Saw with Enclosedan enclosed cabinet stand7.9
1

SKIL 2.8 Amp 9 In. 2-Speed Benchtop: Best for compact furniture shops

SKIL 2.8 Amp 9 In. 2-Speed Benchtop, 14-inch band saws for woodworking
9.7/10Our score
  • 2.8 amp induction motor
  • 2-speed drive system
  • Quick blade tension setting
  • Rack and pinion table adjustment
  • 2 1/2-inch dust port

The SKIL combines a compact 9-inch format with a 2.8 amp induction motor, blade guides and a dust port. It fits woodworkers who need curved cuts and smaller ripping jobs without moving to a floor-standing saw.

See it on Amazon

Pros

  • 2-speed drive system
  • Miter gauge included
  • Dust port accepts standard 2 1/2-inch vacuum hoses

Cons

  • 9-inch format is smaller than full-size 14-inch saws
  • Best suited to wood rather than deep furniture-stock resawing

The SKIL BW9501-00 is the highest-scoring compact pick in this group. Its 2.8 amp induction motor and 9-inch blade format suit smaller furniture parts, curved work and thinner ripping where a full-size floor saw would take up too much room.

The 2-speed drive system includes tool-free belt tensioning, while the quick blade tension setting helps you prepare the saw without a long adjustment process. Precision ball-bearing and lower blade guides support consistent tracking during cuts.

The rack and pinion table adjustment makes angle changes easier. A miter gauge helps guide crosscuts, and the steel base adds stability for a benchtop machine.

Dust control is also practical here. The port accepts standard 2 1/2-inch vacuum hoses, so it can connect to a shop vacuum for cleaner work around the saw.

Choose the SKIL if you want a compact wood-focused machine with useful setup features. Its 9-inch format is not intended to replace the deeper capacity of a full-size 14-inch resaw saw.

SKIL 2.8 Amp 9 In. 2-Speed BenchtopCheck it on Amazon
2

DEWALT 20V MAX Band Saw: Best for portable deep cuts

DEWALT 20V MAX Band Saw, 14-inch band saws for woodworking
9.6/10Our score
  • 5-inch cutting capacity
  • Variable speed
  • LED work light
  • Tool-less blade changing lever
  • Brushless motor

The DEWALT is a portable deep-cut band saw for work away from a fixed bench. Its 5-inch rectangular capacity and variable speed help with mobile cutting, though it is not a substitute for a 14-inch furniture-shop saw.

See it on Amazon

Pros

  • Portable 12.4 lb format
  • Integrated hang hook
  • LED work light with 20-second delay

Cons

  • Bare tool only
  • Not a full-size 14-inch table saw

The DEWALT 20V MAX is the portable choice for cutting where a fixed workshop saw won't reach. Its 5-inch cutting capacity handles rectangular material up to 5 inches by 4 3/4 inches and round material up to 4 inches.

Variable speed gives you more control over the cut, while the LED work light with a 20-second delay helps illuminate darker work surfaces. The tool-less blade-changing lever loosens blade tension when you need to replace the blade.

At 12.4 lb, this is easier to carry than a floor-standing saw. The integrated hang hook also lets you store it without damaging the front handle or base.

The trade-off is clear: this is a portable band saw, not a 14-inch table-based machine for furniture resawing. It is also a bare tool, so account for the required 20V MAX battery and charger.

Choose the DEWALT for mobile deep cuts and repair work. For controlled furniture work on a table, choose one of the benchtop or floor-standing saws instead.

DEWALT 20V MAX Band SawCheck it on Amazon
3

POWERTEC 93-1/2 Inch Bandsaw Blades Assortment: Best for blade flexibility

POWERTEC 93-1/2 Inch Bandsaw Blades Assortment, 14-inch band saws for woodworking
9.6/10Our score
  • 3 blades
  • 6 TPI and 14 TPI options
  • 93 1/2-inch length
  • High carbon steel construction
  • Fits listed 93 1/2-inch saws

This POWERTEC assortment gives a compatible 93 1/2-inch saw several tooth and width choices for resawing, ripping, crosscuts and curves. Confirm your saw's blade length before ordering.

See it on Amazon

Pros

  • Three blade options
  • 6 TPI and 14 TPI choices
  • Designed for wood, plastic and non-ferrous metals

Cons

  • Only fits saws designed for 93 1/2-inch blades
  • Blade choice still needs to match the cut

The POWERTEC assortment is a blade choice for compatible saws, not a complete machine. It includes 3 93 1/2-inch blades: a 1/2-inch 6 TPI wood blade, a 1/8-inch 14 TPI scroll-cutting blade and a 1/4-inch 6 TPI wood blade.

That spread covers different cutting patterns. The wider 6 TPI blades are suited to larger wood cuts, while the narrower 14 TPI blade is aimed at scroll work and tighter curves.

The blades are made from high carbon steel and are designed for wood, plastic and non-ferrous metals. POWERTEC also names several compatible 14-inch saw families, including Delta, Grizzly, Rikon, JET, Shop Fox, WEN and RIDGID models.

Blade length must come before brand preference. Measure or confirm your saw's required length because a 93 1/2-inch blade will not fit a machine designed for another loop size.

Choose this set when your saw accepts 93 1/2-inch blades and you want several tooth and width options. It is especially useful when your work changes between curves, ripping and resawing.

POWERTEC 93-1/2 Inch Bandsaw Blades AssortmentCheck it on Amazon
4

WEN 9-Inch Band Saw: Best for a complete benchtop setup

WEN 9-Inch Band Saw, 14-inch band saws for woodworking
9.6/10Our score
  • 2.8 amp motor
  • 3 1/2-inch cutting depth
  • 9-inch cutting width
  • 45-degree bevel
  • Fence, miter gauge and dust port included

The WEN gives a small shop a fence, miter gauge, dust port and adjustable blade guard in one 9-inch benchtop format. Its 3 1/2-inch depth is useful for small furniture parts and general shop work.

See it on Amazon

Pros

  • Included 1/4-inch blade
  • Table bevels to 45 degrees
  • 2-year warranty

Cons

  • Less depth than full-size 14-inch saws
  • Uses 59 1/2-inch blades rather than the 93 1/2-inch size

The WEN BA3959 is a complete benchtop setup for smaller woodworking jobs. Its 2.8 amp motor drives the included 1/4-inch blade up to 2500 feet per minute, with cuts up to 3 1/2 inches deep and 9 inches wide.

The 12 1/4 x 11 7/8-inch table bevels to 45 degrees. A rip fence supports straight cuts, while the miter gauge helps guide crosscuts and angled work.

WEN uses 59 1/2-inch blades from 1/8 to 3/8 inch wide. That range gives you room to change from detailed curves to broader cuts, but it is not the same blade size used by the full-size JET picks.

The package also includes a 2 1/2-inch dust port, adjustable blade guard with ball-bearing supports and a 2-year warranty. Those included parts make it easier to start with one compact purchase.

Choose the WEN if you want a compact saw with the main guides and dust connection included. Choose a 14-inch floor model when your work regularly exceeds 3 1/2 inches in height.

WEN 9-Inch Band SawCheck it on Amazon
5

Woodskil 9-Inch Band Saw: Best for angled benchtop cuts

Woodskil 9-Inch Band Saw, 14-inch band saws for woodworking
9.4/10Our score
  • 3 amp motor
  • 2500 FPM blade speed
  • 3 1/2-inch cutting depth
  • 9-inch cutting width
  • 0 to 45-degree cast aluminum table

The Woodskil is a compact option for straight, curved and angled work. Its cast aluminum table, rip fence and miter gauge support small furniture parts, while the steel base helps limit vibration.

See it on Amazon

Pros

  • 3 amp motor
  • 45-degree table tilt
  • 2 1/2-inch dust exhaust port

Cons

  • 9-inch cutting format
  • Blade and motor details should be matched to the intended material

The Woodskil is another compact option, with a 3 amp motor, 2500 FPM blade speed and a maximum cutting depth of 3 1/2 inches. Its 9-inch cutting width suits small furniture parts, trim work and general shop cuts.

Its cast aluminum table tilts from 0 to 45 degrees, and the table measures 12 5/16 x 11 7/8 inches. A rip fence and 120-degree miter gauge support straight and angled work.

The machine uses 59 1/2-inch blades from 1/8 to 3/8 inch wide. That makes it closer to the WEN than to the full-size 14-inch models in blade planning.

A steel base helps limit vibration, while the 2 1/2-inch dust exhaust port and dust brush help manage debris around the saw wheel. Read the manual before use and keep it available for setup and safety checks.

Choose the Woodskil when you want a compact saw with a tilting table and steel base. Its stated cutting depth makes it a small-shop option rather than a deep resaw machine.

Woodskil 9-Inch Band SawCheck it on Amazon
6

JET 14" Woodworking Band Saw: Best for deep resawing

JET 14" Woodworking Band Saw, 14-inch band saws for woodworking
9.2/10Our score
  • 1.75 HP motor
  • 13-inch resaw capacity
  • 360-square-inch cast-iron table
  • 116-inch blade loop
  • Dual 4-inch dust ports

The JET 14-inch SFX is the strongest choice here for thick furniture stock and resawing. Its 13-inch capacity, 1.75 HP motor and 360-square-inch table give large workpieces more room than benchtop machines.

See it on Amazon

Pros

  • 13-inch resaw capacity
  • Steel stand and resaw fence included
  • 5-year warranty

Cons

  • Blade sold separately
  • 272 lb floor-standing format needs permanent space

The JET JWBS-14SFX is the best match for thick furniture stock and serious resawing. Its 13-inch resaw capacity lets you cut tall material in one pass, while the 1.75 HP capacitor-run motor provides the power expected from a full-size woodworking saw.

The 360-square-inch ground cast-iron table gives large workpieces more support. It tilts from 0 to 45 degrees right on a diecast-and-steel trunnion for bevel cuts.

This model accepts 116-inch blades from 1/8 to 3/4 inch wide. Narrow blades support tighter scroll cuts, while wider blades are better suited to faster resawing.

The 13 1/2-inch throat capacity leaves useful room between the blade and frame. Independently adjustable ball-bearing guides help keep the blade aligned, and dual 4-inch dust ports connect to a larger dust collection setup.

JET includes the saw, steel stand, table, fence rail, resaw fence, dust chute, rubber feet, hex wrenches and hardware. The blade is sold separately, so select a compatible 116-inch blade before your first furniture project.

Choose the JET SFX when deep resawing is central to your work. It weighs 272 lb and measures 75.5 x 27 x 37 inches, so plan the shop location before delivery.

JET 14" Woodworking Band SawCheck it on Amazon
7

QD-KYOHO Band Saw: Best for dual-speed full-size work

QD-KYOHO Band Saw, 14-inch band saws for woodworking
8.7/10Our score
  • 14-inch format
  • 2 HP motor
  • 1445 and 2950 FPM speed settings
  • 13-inch cutting height
  • 45-degree table tilt

The QD-KYOHO gives a full-size workshop two speed settings and a large cast-iron table. It suits buyers who want 14-inch capacity with a 2 HP motor, but it arrives as a bare tool.

See it on Amazon

Pros

  • Dual speed settings
  • 13-inch cutting height
  • Overload protection

Cons

  • Bare tool
  • 111-inch blade size needs careful replacement planning

The QD-KYOHO is a full-size 14-inch saw for buyers who want two speed settings. Its 2 HP, 14 amp, 120V motor offers 1445 and 2950 FPM settings, giving you a lower setting for hardwoods and a higher setting for softwoods.

The saw has up to 13 inches of cutting height and a 13 5/8-inch maximum throat width. Its 21 1/2 x 15 3/4-inch cast-iron table tilts 45 degrees right and 5 degrees left.

The welded steel plate frame and dynamically balanced cast aluminum wheels support stability during cuts. Upper and lower blade guides allow vertical and horizontal adjustment, and the overload protection adds a useful safety feature.

The machine uses a 111-inch blade and arrives as a bare tool. That means you need to plan the blade, setup and workshop location separately from the saw purchase.

Choose the QD-KYOHO if you want full-size capacity and dual speed. The JET SFX is a clearer pick if you prefer a named resaw capacity, included stand and included resaw fence.

QD-KYOHO Band SawCheck it on Amazon
8

Carter Products DEL14 Band Saw Guide Set: Best for Delta guide upgrades

Carter Products DEL14 Band Saw Guide Set, 14-inch band saws for woodworking
8.3/10Our score
  • Ball-bearing guide design
  • Forward, backward and side-to-side adjustment
  • 1/8 to 1-inch blade range
  • Sealed bearings

The Carter DEL14 is an accessory for compatible 14-inch Delta band saws, not a complete saw. Its adjustable ball-bearing guides help maintain blade alignment while reducing blade friction.

See it on Amazon

Pros

  • Wide stated blade range
  • Sealed bearings
  • Mounting hardware and instructions included

Cons

  • Designed for 14-inch Delta band saws
  • Does not add cutting capacity

The Carter Products DEL14 is an upgrade for compatible 14-inch Delta band saws. Its ball-bearing guide set helps maintain blade alignment while reducing the friction caused by sliding contact.

The bearings adjust forward and backward as well as side to side. That range gives you room to set the guides for the blade width you have fitted.

The stated blade range is 1/8 to 1 inch. It covers narrow blades for curves and wider blades for larger cuts, so the set suits a range of routine work.

The bearings are lubricated and sealed for life. You do not need a separate lubrication routine for the guide bearings themselves.

Mounting hardware and instructions are included. That makes the set a focused guide-system fix rather than a wider rebuild of the saw.

Compatibility matters more than the 14-inch label. This guide set is for 14-inch Delta band saws, so confirm your model before ordering.

It weighs 2.4 pounds shipped. That light package is easy to store with the saw parts you already keep for set-up.

Choose it if your existing Delta saw needs a guide upgrade. It does not increase cutting height, throat capacity or motor power.

Carter Products DEL14 Band Saw Guide SetCheck it on Amazon
9

JET 14" Woodworking Band Saw with Enclosed: Best for an enclosed cabinet stand

JET 14" Woodworking Band Saw with Enclosed, 14-inch band saws for woodworking
7.9/10Our score
  • 1 HP motor
  • Enclosed cabinet stand
  • 6-inch cutting height
  • 15 x 15-inch cast-iron table
  • 4-inch dust port

This JET gives a workshop a traditional 14-inch saw on an enclosed cabinet stand. It cuts 6 inches out of the box and accepts an optional riser block for greater resawing depth.

See it on Amazon

Pros

  • Closed cabinet stand
  • 3/8-inch, 6 TPI blade included
  • 5-year warranty

Cons

  • 1 HP motor
  • Riser block is optional and sold separately

The enclosed JET is the better choice when you want a cabinet stand and a traditional 14-inch layout. Its 1 HP motor sits inside the closed stand, and the saw arrives prewired for 115V with conversion to 230V.

Out of the box, it cuts up to 6 inches tall with a 13 1/2-inch throat. The optional JET JRB-14 riser block raises the depth of cut to 12 inches, but that accessory is sold separately.

The 15 x 15-inch offset cast-iron table gives more work area in front of the blade. It tilts 45 degrees right and 10 degrees left, with a 3/8 x 3/4-inch miter slot.

This is a wood-only, single-speed saw. It runs 93 1/2-inch blades from 1/8 to 3/4 inch wide at 3000 surface feet per minute, and it includes a 3/8-inch, 6 TPI blade.

The enclosed stand houses the motor and V-belt drive behind a latching door. A 4-inch dust port supports connection to a shop dust collector.

Choose this JET when the cabinet stand, included blade and 5-year warranty matter more than maximum out-of-box resaw depth. Pick the SFX when you need 13 inches of resaw capacity without adding a riser block.

JET 14" Woodworking Band Saw with EnclosedCheck it on Amazon

What should you look for in a 14-inch band saw?

The main buying checks are resaw capacity, throat depth, motor power, blade length and table support. Those details tell you more about furniture work than the 14-inch label alone.

How much resaw capacity do you need?

Choose capacity based on the thickest board you expect to cut. The JET SFX provides 13 inches, the QD-KYOHO lists 13 inches, and the enclosed JET provides 6 inches before its optional riser block.

Resawing also needs the right blade. A wider blade supports a straighter cut in thick stock, while a narrow blade is more useful for curves.

The POWERTEC set shows this difference with 1/8-inch, 1/4-inch and 1/2-inch widths.

For more blade guidance, read what teeth per inch means on a saw blade. Tooth spacing affects how the blade clears material and how smoothly it handles a particular cut.

Does a larger table help with furniture work?

Yes. A larger table gives wide or tall workpieces more support before and after the blade.

The JET SFX has a 360-square-inch cast-iron table, while the QD-KYOHO has a 21 1/2 x 15 3/4-inch cast-iron table.

A benchtop saw can still work well for smaller parts. The WEN and Woodskil tables are around 12 x 12 inches, which is easier to fit into a compact shop but gives less support for large panels.

Check table tilt as well as size. The SKIL uses rack and pinion table adjustment, the WEN tilts to 45 degrees, and the QD-KYOHO tilts right 45 degrees and left 5 degrees.

What blade length should you buy?

Buy the length made for your saw model. The 14-inch machines here do not all use the same blade: the JET SFX uses 116 inches, the QD-KYOHO uses 111 inches, and both the enclosed JET and POWERTEC set use 93 1/2 inches.

Blade width and tooth count should match the cut. Narrower blades handle tighter curves, while wider blades suit straighter cuts and resawing.

More teeth can help with finer cuts, but the correct choice also depends on stock thickness and material.

Never assume that a 14-inch saw accepts every 14-inch blade. Confirm the loop length, width range and tooth pattern before ordering replacements.

Can you use a band saw for metal?

Only when the saw and blade are designed for it. The woodworking models in this roundup are focused on wood, while the POWERTEC blades are described for wood, plastic and non-ferrous metals.

The DEWALT 20V MAX is a portable option with a metal blade and a 5-inch cutting capacity, but it still serves a different job from a 14-inch woodworking saw. For a compact metal-focused option, compare our guide to the best benchtop metal cutting band saw.

Don't use a woodworking setup for materials outside its stated purpose. Match the blade, speed and saw design to the material you plan to cut.

How do you keep a band saw ready for accurate cuts?

Start with a sharp blade and set its tension and tracking according to the saw's instructions. Keep the table clear, set the upper guide close to the workpiece and use a fence or miter gauge when the cut calls for one.

Check the guide position again when you change blade width. A narrow blade for curves and a wider blade for resawing do not need the same close setting.

Dust collection helps keep the work area clearer and can reduce buildup around the wheels and guides. The SKIL and WEN accept 2 1/2-inch hoses, while the JET models use larger 4-inch dust ports.

Connect the hose before a long session rather than after dust has built up. A clear port makes it easier to keep the lower wheel area and table clear.

Support long or heavy stock before it reaches the table. A stable stand, a clear feed path and a measured cut line matter as much as motor power.

Watch how the stock moves on both sides of the blade. If the piece shifts or binds, stop and fix the support instead of forcing the feed.

Wipe down a cast-iron table and keep it dry between jobs. A light coat of paste wax helps stock move smoothly and helps limit surface rust.

Store the saw with the blade guard set and the table clear of offcuts. That habit makes the next set-up faster and keeps loose pieces away from the blade.

A band saw is not the only way to make a woodworking cut. For small manual cuts, our guide to the best hand saw for woodworking may be a better fit.

Which 14-inch band saw should you choose?

Choose the JET 14-inch SFX if you need deep resawing, a 1.75 HP motor and a large cast-iron table for furniture work. Choose the enclosed JET if you want a cabinet stand, an included blade and the option to add a riser block later.

The SFX cuts 13 inches tall in one pass. Its 116-inch blade loop accepts blades from 1/8 to 3/4 inch wide for curves and resawing.

The enclosed JET cuts 6 inches tall out of the box. Its optional riser block raises that depth to 12 inches, but the block is sold separately.

Pick the QD-KYOHO for dual-speed full-size cutting. Its 2 HP motor offers 1445 and 2950 FPM settings for hardwoods and softwoods.

The QD-KYOHO has up to 13 inches of cutting height. Its large cast-iron table tilts 45 degrees right and 5 degrees left for angled work.

Choose the SKIL, WEN or Woodskil for a compact benchtop machine. Those saws cut up to 3 1/2 inches deep and 9 inches wide for smaller parts.

The SKIL suits quick set-up with tool-free belt tensioning and quick blade tension setting. Its rack and pinion table adjustment helps with angle changes on a small table.

The WEN gives a fence, miter gauge and dust port in one package. Its table tilts to 45 degrees, and its included 1/4-inch blade helps you start without a first blade order.

The Woodskil suits angled benchtop cuts with a cast aluminum table. It tilts from 0 to 45 degrees and has a steel base to help limit vibration.

The DEWALT is the portable pick for work away from a fixed bench. Its 5-inch cutting capacity and variable speed suit mobile deep cuts rather than table-based resawing.

POWERTEC and Carter Products solve blade and guide-system needs for compatible saws. They do not add a saw frame, so check your current model first.

For routing operations that often follow band saw work, see our guide on how to use a router table. Match the saw to your largest cut, then confirm blade length, table space and dust collection before you order.

Our top 3 picks at a glance

  1. 1 SKIL 2.8 Amp 9 In. 2-Speed Benchtop
    Best for compact furniture shops

    SKIL 2.8 Amp 9 In. 2-Speed Benchtop

    9.7/10 our score

    See it on Amazon
  2. 2 DEWALT 20V MAX Band Saw
    Best for portable deep cuts

    DEWALT 20V MAX Band Saw

    9.6/10 our score

    See it on Amazon
  3. 3 POWERTEC 93-1/2 Inch Bandsaw Blades Assortment
    Best for blade flexibility

    POWERTEC 93-1/2 Inch Bandsaw Blades Assortment

    9.6/10 our score

    See it on Amazon

Frequently asked questions

Are 14-inch band saws good for woodworking?

Yes. A 14-inch band saw gives a woodworker more throat space and cutting height than a benchtop saw, which helps with furniture parts, curves and resawing.

The exact result depends on the motor, blade width, blade length and stated resaw capacity, so compare those details before choosing.

What size blade does a 14-inch band saw use?

The blade length depends on the saw model. The JET JWBS-14SFX uses a 116-inch blade loop, while the enclosed JET uses 93 1/2-inch blades.

POWERTEC's 93 1/2-inch assortment fits saws designed for that length, but you should confirm the exact size first.

Is a 14-inch band saw better than a table saw?

A band saw is usually the better fit for curved cuts, resawing and irregular shapes. A table saw is often the easier choice for repeated straight ripping with a fence.

Compare the jobs you do most often in our table saw vs band saw guide before choosing one machine.

What does resaw capacity mean on a band saw?

Resaw capacity is the maximum height of stock the saw can cut in one pass. The JET 14-inch SFX lists a 13-inch resaw capacity, while the enclosed JET lists 6 inches out of the box and up to 12 inches with its optional riser block.